Subaru Legacy III (2000-2003 year). Instruction - page 89
SP(H4SO)-10
SPEED CONTROL SYSTEMS
ACCELERATOR CONTROL CABLE
3. Accelerator Control Cable
A: REMOVAL
1) Remove the accelerator pedal. <Ref. to
SP(H4SO)-5, REMOVAL, Accelerator Pedal.>
2) Separate the accelerator cable and accelerator
pedal.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Apply grease to engine side accelerator cable
end.
Grease:
Part No. 004404002 (Slicolube G-30M)
NOTE:
• If the cable clamp is damaged, replace it with a
new one.
• Never fail to cover the outer cable end with boot.
• Be careful not to kink the accelerator cable.
• Do not apply grease to except specified part.
3) Adjustment after pedal installation. <Ref. to
SP(H4SO)-8, ADJUSTMENT, Accelerator Pedal.>
C: INSPECTION
1) Make sure the inner cable is not twisted or worn.
2) Make sure the outer cable is not cracked.
(A) Applying position of grease
(B) Throttle cam
SP-00042
( A )
( B )
IGNITION
IG(H4SO)
Page
1.
General Description ....................................................................................2
2.
Spark Plug...................................................................................................5
3.
Ignition Coil and Ignitor Assembly ...............................................................8
4.
Spark Plug Cord........................................................................................10
IG(H4SO)-2
IGNITION
GENERAL DESCRIPTION
1. General Description
A: SPECIFICATIONS
Item
Designation
Ignition coil
and ignitor
assembly
Model
FH0137
Manufacturer
DIAMOND
Primary coil resistance
0.73
Ω±
10%
Secondary coil resistance
12.8 k
Ω±
15%
Insulation resistance between primary
terminal and case
More than 100 M
Ω
Spark plug
Type and manufacturer
RC10YC4 .......... CHAMPION
Alternate
BKR5E-11 .......... NGK
BKR6E-11 .......... NGK
Thread size
mm
14, P = 1.25
Spark gap
mm (in)
1.0 — 1.1 (0.039 — 0.043)
IG(H4SO)-3
IGNITION
GENERAL DESCRIPTION
B: COMPONENT
IG-00036
T2
T1
T1
( 2 )
( 2 )
( 1 )
( 4 )
( 4 )
( 3 )
( 1 )
(1) Spark plug
(4) Spark plug cord (#2, #4)
Tightening torque: N·m (kgf-m, ft-lb)
(2) Spark plug cord (#1, #3)
T1: 21 (2.1, 15)
(3) Ignition coil and ignitor ASSY
T2: 6.4 (0.65, 4.7)
