SsangYong: Engine Euro 4. Instruction - page 100
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
6
DIAGNOSIS
TGS LEVER
Abnormal steering
wheel tip switch signal
Defective tip switch
Faulty TCU shift
Defective TCU CAN
communication
Cause:
The steering wheel tip switch signal is faulty.
Symptom: - Indicator “M” is flashing due to malfunction when the shift lever
is in the manual mode position.
- If the shift lever is not in “M” position, the malfunction is
overridden.
Action:
- The operation is automatically resumed if the fault is not de-
tected for 50 ms.
- Check the steering wheel tip switch.
Cause:
The manual mode switch operates for 50 ms when the shift lever
is P, R or N positions.
Symptom: - Indicator “M” flashes if the shift lever is in D.
- The mode is recognized as the manual mode even if the shift
lever is in “D” position.
Action:
The operation is automatically resumed if the fault is not de-
tected for 50 ms and the shift lever is in P, R or N positions.
Check the TCU if there is errors related to the A/T shift.
Cause:
- The up/down shift command in not delivered to the TCU (faulty
tip switch).
- There is no CAN signal for 500 ms.
Symptom: - Indicator “M” is flashing due to malfunction when the shift lever
is in the manual mode position.
- If the shift lever is not in “M” position, the malfunction is
overridden.
Action:
Check the CAN communication line.
P1912-6
P1912-7
P1927-8
P1928-4
Malfunction
Help tips
DTC
P/TRUNK
DTC .................................................................................................................... 3
TABLE OF CONTENTS
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3
DIAGNOSIS
P/TRUNK
BRAKE
ECU
TCU
A/BAG
TC
RK-STICS
FFH
R/SENSOR
FA
T
C
TGS-LEVER
P/TRUNK
CCCS
DTC
Causes
- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The micro switch is malfunctioning.
- The power striker'motor is malfunctioning.
Actions
- Check the related wiring and connector for proper connection.
- Replace the power striker.
Power
Trunk
Monitoring
Causes
- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The micro switch is malfunctioning.
- The power latch motor is malfunctioning.
Actions
- Check the related wiring and connector for proper connection.
- Replace the power latch.
Causes
- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The hall sensor is malfunctioning.
- The DC-gear motor is malfunctioning.
Actions
- Check the related wiring and connector for proper connection.
- Replace the DC-gear motor.
Causes
- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The PTL ECU is malfunctioning.
Actions
- Check the related wiring for proper connection.
- Replace the PTL ECU.
Function
System component
DTC
Description
DC-Gear motor
2
Faulty DC-gear motor
Power latch
1
Faulty power latch
Power striker
0
Faulty power striker
Power trunk lid
3
Faulty power trunk lid