Dacia SuperNova (engine E7J). Instruction - page 89
42
UPPER FRONT STRUCTURE
42 - 04
RADIATOR UPPER CROSS BAR
DISMOUNTING
Dismount the elements, which are in contact
with the radiator upper cross bar.
Detach the welding points of the radiator
upper cross bar (1) which are in connection with:
- the front wing lining in the area (3);
- the headlamp support in the area (4);
- the side wall in the area (5);
Straighten the areas resulted by dismounting.
Grind the areas resulted by dismounting.
REMOUNTING
Position and center the new element.
Check the correct positioning of the radiator
upper cross bar.
Weld the radiator upper cross bar (1) following
the welding outlines (3), (4) and (5).
Protect the welds with a corrosion-preventing
product.
Mount the elements, which are in connection
with the radiator upper cross bar.
1
4
5
3
42
UPPER FRONT STRUCTURE
42 - 05
HEADLAMP SUPPORT
DISMOUNTING
Dismount the elements, which are in contact
with the headlamp support.
Detach the welding points of the headlamp
support (2) which are in connection with :
- the front wing lining in the area (6);
- the radiator upper cross bar in the area (7);
- the front cross bar in the area (8).
Straighten the areas resulted by dismounting.
Grind the areas resulted by dismounting.
REMOUNTING
Position and center the new element.
Check the correct positioning of the headlamp support.
Weld the headlamp support (2) following the welding outlines (6), (7) and (8).
Protect the welding with a corrosion-preventing product.
Mount the elements, which are in connection with the headlamp support.
7
8
6
42
UPPER FRONT STRUCTURE
AERATION GRILL
DISMOUNTING
Take out the clips (1) from the front grill
grippers taking care to prevent their distortion
or damaging.
REMOUNTING
Perform in the reverse order the
dismounting operations.
1
42 - 06
43 - 1
43
SIDE UPPER STRUCTURE
FRONT PILLAR LINING
1. Front pillar
2. Front pillar lining
DISMOUNTING
Dismount the elements that are in contact
with the front pillar lining.
Detach the welding points of the front pillar
lining (2) which are in connection with :
- side frame lining in the area (8);
- windscreen lower cross bar in the area (5);
- front wing lining in the area (6);
- climate control box in the area (7) .
Straighten the areas resulted by dismounting.
Grind the areas resulted by dismounting.
REMOUNTING
Position and center the new element .
Check the correct positioning of the front pillar lining.
Weld the front pillar lining (2) following the assembling outlines (5), (6), (7) and (8).
Protect the new element with a corrosion preventing and noise absorbent product.
FRONT PILLAR LINING