Peugeot 1007 Dag (2008.5). Instruction - part 10

10

10

138

IDENTIFICATION FEATURES
OF YOUR 1007

A. Manufacturer's plate.
B. Serial number on the

bodywork (under the
bonnet, at the centre of the
crossmember).

C. Serial number on the fascia

(on the small aperture,
left-hand side).

D. Tyres and paint colour

reference.

The label D on the pillar, near the left-

hand door striker, indicates:

-

the wheel and tyre sizes,

-

the brands of tyres approved by

the manufacturer,

-

the tyre pressures (the tyre

pressure must be checked
when the tyre is cold, at least
once a month)

,

-

the paint colour reference.

Wheels equipped with 195/50R16

tyres cannot be fi tted with snow

chains.
Contact a PEUGEOT dealer for in-
formation.

Low tyre pressures increase

fuel consumption.

139

WIP Com

MULTIMEDIA AUDIO EQUIPMENT/TELEPHONE

JUKEBOX FUNCTION (10 GB)/GPS (EUROPE)

The WIP Com is coded in such a way that it will only
operate in your vehicle. If it is to be installed in another

vehicle, contact a PEUGEOT dealer for confi guration of
the system.

For safety reasons, it is imperative that the driver carries

out operations which require prolonged attention while
the vehicle is stationary.

When the engine is switched off and to prevent

discharging of the battery, the WIP Com may switch off
after a few minutes.

CONTENTS

• 01 First steps

pg. 140

• 02 General menu

pg. 141

• 03 GPS

pg. 142

• 04 Traffi c information

pg. 150

• 05 Audio/Video

pg. 152

• 06 Telephone

pg. 159

• 07 Control short-cuts

pg. 162

• 08 Confi guration

pg. 164

• 09 Display fl ow charts

pg. 165

• Frequently asked questions pg. 183

140

01

2

2

1

1

55

3

3

4

4

8

8

99

10

10

15

15

11

11

17

17

18

18

12

12

16

16

14

14

7

7

6

6

13

13

1.

Ejection of the CD.

2.

Selection of the source: radio, Jukebox, CD,

CD changer and auxiliary (AUX, if activated on the Confi guration menu).

Long press: CD copy to hard disc.

3.

Long press on the SOS button: emergency call.

4.

Selection of the display on the screen from the modes: TRIP,

TEL, NAV and AUDIO.

5. Modifi cation of the screen display.

Long press: reinitialisation of the WIP Com.

6.

On/Off and Volume adjustment.

7.

Selection of the wavebands FM1, FM2, FMast, AM.

8.

TA (Traffi c Announcement) function on/off.

Long press: access to the PTY

(radio Programme TYpes) mode.

9. Access to the "PEUGEOT" services menu.

10. Cancellation of the current operation.

Long press: return to the current application.

11.

Automatic search for a lower/higher frequency.

Selection of the previous/next CD, MP3 or Jukebox track.

12.

Displaying of the general menu.

13.

Keypad for entering descriptions by successive presses.

14. Selection of the previous/next CD. Selection of the previous/

next MP3/Jukebox directory.

15. Audio option adjustments: front/rear, left/right balance,

loudness, sound ambiences.

16.

Selection and confi rmation.

17. SIM card slot.

18.

Displaying of the list of local radio stations,

of the tracks on the CD or of the MP3/Jukebox directories.

Long press: updating of the local radio stations.

FIRST STEPS

141

02

GENERAL MENU

MAP: orientation, details,
display.

AUDIO FUNCTIONS: radio,
CD, Jukebox, options.

For maintenance of the
display, the use of a
soft, non-abrasive cloth

(spectacles cloth) is
recommended without any
additional product.

TELEMATIC: telephone,
directory, SMS.

CONFIGURATION: vehicle,

display, time, languages,

voice, auxiliary socket (AUX)

parameters.

VIDEO: activation,
parameters.

VEHICLE DIAGNOSTICS:

warnings log, status of the
functions.

NAVIGATION GUIDANCE:

GPS, stages, options.

TRAFFIC INFORMATION:

TMC information, messages.

142

2

2

3

3

55

7

7

4

4

6

6

8

8

03

1

1

Press the MENU button.

Turn the dial and select the

NAVIGATION GUIDANCE function.

Press the dial to confi rm the selection.

Turn the dial and select the

DESTINATION CHOICE function.

Press the dial to confi rm the selection.

Press the dial to confi rm the selection.

Turn the dial and select the ENTER

AN ADDRESS function.

When the country has been selected,
turn the dial and select the TOWN
function.

TOWN

ENTER AN ADDRESS

DESTINATION CHOICE

Tip: for a detailed global view of the menus available, refer to the "Display fl ow charts" section of this
WIP Com chapter.

GPS

SELECTING A DESTINATION

143

99

11

11

12

12

14

14

10

10

13

13

Press the dial to confi rm the selection.

Turn the dial and select the letters of

the town one by one confi rming each

time by pressing the dial.

Select OK and press the dial to

confi rm.

To speed up the process, the POST CODE can be
entered instead of the name of the town.
Use the alphanumeric keypad to enter the letters and

digits and "*" to correct.

Press the dial to confi rm the selection.

Select OK on the ENTER AN

ADDRESS page.

Repeat steps 8 to 12 for the ROAD and N° functions.

OK

OK

Select the STORE function to record the address entered in a

directory record and press the dial to confi rm the selection.

The points of interest (POI) indicate all of the service locations in the

vicinity (hotels, various businesses, airports...).

STORE

PARIS

POI

144

1

1

2

2

3

3

4

4

55

6

6

7

7

8

8

03

GUIDANCE OPTIONS

GPS

The route chosen by the GPS audio/telephone depends directly on the guidance options.
Changing these options may completely change the route.

Press the MENU button.

Turn the dial and select the

NAVIGATION GUIDANCE function.

Press the dial to confi rm the selection.

Turn the dial and select the

GUIDANCE OPTIONS function.

Turn the dial and select the DEFINE

CALCULATION CRITERIA function.

Press the dial to confi rm the selection.

Press the dial to confi rm the selection.

GUIDANCE OPTIONS

DISTANCE/TIME

DEFINE CALCULATION CRITERIA

Turn the dial and select, for example,

the DISTANCE/TIME function.

145

9

10

10

11

11

12

12

1

1

2

2

3

3

4

4

55

Turn the dial and select the TRAFFIC
INFO function if it is not ticked.

Press the dial to confi rm the selection.

Select OK and press the dial to

confi rm.

TRAFFIC INFO

Press the dial to confi rm the selection.

Tick this box for optimum operation of the traffi c information,

diversions will be suggested.

OK

GUIDANCE SPEECH SYNTHESIS

Press the MENU button.

Turn the dial and select the

NAVIGATION GUIDANCE function.

Press the dial to confi rm the selection.

GUIDANCE OPTIONS

Turn the dial and select the

GUIDANCE OPTIONS function.

Press the dial to confi rm the selection.

146

6

6

8

8

1

1

2

2

3

3

4

4

7

7

03

Press the MENU button.

Turn the dial and select the

MAP function.

Press the dial to confi rm the selection.

Turn the dial and select the

MAP DETAILS function.
Permits selection of the services
which can be seen on the map

(hotels, restaurants...).

ACTIONS ON THE MAP

MAP DETAILS

During the announcements, the volume of each

speech synthesis function (guidance, traffi c

information...) can be adjusted directly.

GUIDANCE SPEECH
SYNTHESIS

Select the ADJUST SPEECH

SYNTHESIS function and press the

dial to confi rm.

GPS

ADJUST SPEECH SYNTHESIS

DEACTIVATE

Select the DEACTIVATE function and

press the dial to confi rm.

OK

Select OK and press the dial to

confi rm.

147

1

2

2

3

3

4

4

55

6

6

7

7

03

For improved visibility, beyond the scale of 10 km, the map automatically switches to

North Orientation.

Turn the dial and select the MAP
function.

Press the MENU button.

Press the dial to confi rm the selection.

Turn the dial and select the 3D VIEW
tab.

Select OK and press the dial to

confi rm.

Turn the dial and select the

MAP ORIENTATION function.

Press the dial to confi rm the selection.

3D VIEW

GPS

MAP ORIENTATION

3D VIEW

OK

148

1

2

2

3

3

4

4

55

6

6

7

7

03

Press the MENU button.

Press the dial to confi rm the selection.

Turn the dial and select the

MAP function.

Turn the dial and select the

MAP IN WINDOW or

FULL SCREEN MAP tab.

Select OK and press the dial to

confi rm.

Press the dial to confi rm the selection.

Turn the dial and select the

DISPLAY MAP function.

DISPLAYING THE MAP IN A WINDOW
OR IN FULL SCREEN MODE

GPS

DISPLAY MAP

FULL SCREEN MAP

OK

MAP IN WINDOW

149

1

1

2

2

3

4

4

55

99

8

8

7

7

6

6

03

ADDING A STAGE

During guidance, press the MENU
button.

Turn the dial and select the

NAVIGATION GUIDANCE function.

Press the dial to confi rm the selection.

Turn the dial and select the

JOURNEY LEGS AND ROUTE
function.

JOURNEY LEGS AND ROUTE

Select OK and press the dial to

confi rm the order of the stages.

When the new address has been
entered, select OK and press the dial

to confi rm.

Enter for example a new address.

Select the ADD A STAGE function

(9 stages maximum) and press the

dial to confi rm.

Press the dial to confi rm the selection.

The stage must be completed or deleted before the guidance can
continue to the next destination.

Otherwise, the WIP Com will always guide you back to the previous

stage.

ENTER AN ADDRESS

ADD A STAGE

GPS

150

1

1

2

2

3

4

4

5

6

6

7

8

8

04

ACTIVATING THE FILTER ON THE ROUTE

We recommend a fi lter on the route and a fi lter around the vehicle of:
- 5 km or 10 km for a region with heavy traffi c,
- 20 km for a region with a normal level of traffi c,
- 100 km for long journeys (motorway).

Press the MENU button.

Turn the dial and select the

TRAFFIC INFORMATION function.

Press the dial to confi rm the selection.

FILTER TRAFFIC INFORMATION

Turn the dial and select the FILTER

TRAFFIC INFORMATION function.

Press the dial to confi rm the
selection.

GEOGRAPHIC FILTER

Select the GEOGRAPHIC FILTER

function and press the dial to confi rm.

Turn the dial and select the

ON THE ROUTE tab.

OK

TRAFFIC INFORMATION

Select OK and press the dial to

confi rm.

151

1

1

2

2

3

4

4

6

6

55

7

7

04

READ MESSAGES

NEW MESSAGE DISPLAY

OK

CONFIGURING THE TMC MESSAGE
ANNOUNCEMENTS

We recommend that you do not tick the NEW MESSAGE DISPLAY tab for regions with heavy traffi c.

Turn the dial and select the

TRAFFIC INFORMATION function.

Press the dial to confi rm the selection.

Press the dial to confi rm the selection.

Turn the dial and select the

CONFIGURE MESSAGE

ANNOUNCEMENT function.

Select the READ MESSAGES tab.

The Traffi c Information Messages will
be read by the voice synthesiser.

Select the NEW MESSAGE DISPLAY
tab.

The traffi c information messages

are extended to the fi lters selected

(geographic...) and can also be

displayed when guidance is not active.

TRAFFIC INFORMATION

Select OK and press the dial to

confi rm.

CONFIGURE MESSAGE ANNOUNCEMENT

152

1

1

2

2

3

3

4

4

1

2

2

3

3

4

4

05 AUDIO/VIDEO

RADIO

SELECTING A STATION

Press the SOURCE button several
times in succession and select the

RADIO.

Press the BAND button to select a

waveband: FM1, FM2, FMast, AM.

Briefl y press one of the buttons to
carry out an automatic search of the
radio stations.

Press one of the buttons to carry out a
manual search of the radio stations.

Press the LIST button to display the
list of stations received locally

(60 maximum).
To update this list, press for more than
two seconds.

The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception,
including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does
not indicate any failure of the audio equipment.

RDS

Select ACTIVATE FREQUENCY

FOLLOWING (RDS) then press OK.
RDS appears on the display.

Select the FM BAND
PREFERENCES function then press
OK.

Select AUDIO FUNCTIONS then
press OK.

Press the MENU button.

The RDS, if displayed, enables you to continue listening to the

same station by means of frequency following. However, in certain

conditions, this RDS station is not followed throughout the country
as radio stations do not cover 100 % of the territory. This explains

the loss of reception of the station during a journey.

FM BAND PREFERENCES

ACTIVATE FREQUENCY FOLLOWING (RDS)

153

1

1

2

2

05 AUDIO/VIDEO

MP3 CD

The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3,

is an audio compression standard which permits the recording of

several tens of music fi les on a single disc.

In order to be able to play a recorded CDR or CDRW, when recording
it is preferable to select standards ISO 9660 level 1.2 or Joliet.
If the disc is recorded in another format, it may not be played
correctly.

It is recommended that the same recording standard is always used

for an individual disc, with as low a speed as possible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the Joliet standard is
recommended.

The audio equipment will only play audio fi les with the extension

".mp3" with a sampling rate of 22.05 KHz or 44.1 KHz. No other type

of fi le (.wma, .mp4, m3u...) can be played.

It is advisable to restrict fi le names to 20 characters without using

special characters (e.g.: " " ? ; ù) to avoid any playing or displaying
problems.

CD

PLAYING A CD OR AN MP3 COMPILATION

If the player already contains a disc,
press the SOURCE button several
times in succession and select CD to
listen to it.

Press one of the buttons to select a
track on the CD.

Press the LIST button to display the list of tracks on the CD or of
the directories of the MP3 compilation.

The playing and displaying of an MP3 compilation may depend on

the recording programme and/or the parameter settings used. We

recommend use of the ISO 9660 recording standard.

INFORMATION AND ADVICE

Insert circular compact discs only. Some anti-

pirating systems, on original discs or CDs

copied using a personal recorder, may generate

malfunctions regardless of the quality of the original
player.

Insert an audio CD or an MP3 compilation in the

player, play begins automatically.

Рассказать друзьям

Страницы