Peugeot 1007 Dag (2005.5). Instruction - part 3
36 - Audio equipment and telematics
01-10-2005
37
-
Audio equipment and telematics
01-10-2005
Button
Function
J
8
Manual and automatic search of higher frequency
Selection of next CD track and of the PTY (radio)
K
MAN
Manual/automatic operation of buttons
J and L
L
7
Manual and automatic search of lower frequency
Selection of previous CD track and of the PTY (radio)
M
CH. CD
Selection of CD changer
Press for more than 2 seconds: random play (RDM)
N
CD
Selection of the CD source
Press for more than 2 seconds: random play (RDM)
O
Radio
Selection of the radio source. Selection of wavebands FM1, FM2, FMast, AM
Press for more than 2 seconds: automatic storing of stations (autostore)
1 to 6 1 2 3 4 5 6 Selection of station stored in memory
Press for more than 2 seconds: storing of a station in memory
1 to 5
1 2 3 4 5
Selection of the CDs in the CD changer
36 - Audio equipment and telematics
01-10-2005
37
-
Audio equipment and telematics
01-10-2005
GENERAL FUNCTIONS
On/off
With the ignition key
in the accessories or
ignition position, press
button
A to switch the
set on or off.
The set can operate for 30 minutes
without the vehicle ignition being
switched on.
Anti-theft system
The audio system is coded in such a
way that it can operate only on your
vehicle. It would not function if itted
to another vehicle.
The anti-theft system is automatic
and requires no action on your
part.
Press button
G sev-
eral times in succes-
sion to access the
bass (
BASS), treble
(TREB),
loudness
(LOUD), fader (FAD),
balance (
BAL) and
automatic
volume
correction settings.
Exit from audio mode is automatic
after a few seconds without pressing
any button, or by pressing button
G
after coniguration of the automatic
volume correction.
Note: bass, treble and loudness set-
tings are speciic to each source. It
is possible to set them differently for
radio, CD or CD changer.
AUDIO SETTINGS
ADJUSTING THE VOLUME
When
"BASS" is
displayed, press but-
ton
H or I to vary the
setting.
-
"BASS -9" for a
minimum bass set-
ting,
-
"BASS 0" for a normal setting,
-
"BASS +9" for a maximum bass
setting.
Adjusting the bass
Press the button
C to
increase the volume,
or button
B to de-
crease it.
Continuous pressure
on buttons
B and C al-
lows a gradual adjust-
ment of the
volume.
Adjusting the treble
When
"TREB" is displayed, press
button
H or I to vary the setting.
-
"TREB -9" for a minimum treble
setting,
-
"TREB 0" for a normal setting,
-
"TREB +9" for a maximum treble
setting.
Adjusting the loudness
This function automatically empha-
sises bass and treble tones.
Press button
H or I to switch the func-
tion on or off.
38 - Audio equipment and telematics
01-10-2005
39
-
Audio equipment and telematics
01-10-2005
Adjusting the front/rear sound
distribution (Fader)
When
"FAD" is displayed, press but-
ton
H or I.
Button
H increases the volume at
the front.
Button
I increases the volume at the
rear.
Press button
O.
Selecting radio mode
RADIO
Notes on radio reception
Your car radio is subject to pheno-
mena which do not affect domestic
radio sets. Both AM and FM recep-
tion are subject to various forms of
interference. This is no relection on
the quality of the equipment, but is due
to the nature of the signals and the
way in which they are transmitted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of increasing distance from the trans-
mitter, delection of the signals by
obstacles (mountains, hills, buildings,
etc.), or of being in an area which is
not covered by a transmitter.
Selecting a waveband
Press button
O several times in suc-
cession to select wavebands FM1,
FM2, FMast and AM.
Automatic station search
Briely press button
J or L to search
for the station immediately above or
below. By continuing to press the
button in the direction selected, you
will obtain continuous scrolling of the
frequency.
The scrolling stops at the irst sta-
tion found as soon as the button is
released.
If the
TA trafic program is selected,
only stations broadcasting this type
of program are selected.
Searching for a station occurs irst
in
"LO" sensitivity (selection of the
most powerful transmitters) during
scanning of the waveband, then in
"DX" sensitivity (selection of the
weakest and most distant transmit-
ters).
To make a direct search in
"DX" sen-
sitivity, press button
J or L twice.
Adjusting the right/left sound
distribution (Balance)
When
"BAL" is displayed, press but-
ton
H or I.
Button
H increases the volume on
the right-hand side.
Button
I increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons
H or I to switch the
function on or off.
38 - Audio equipment and telematics
01-10-2005
39
-
Audio equipment and telematics
01-10-2005
Adjusting the front/rear sound
distribution (Fader)
When
"FAD" is displayed, press but-
ton
H or I.
Button
H increases the volume at
the front.
Button
I increases the volume at the
rear.
Press button
O.
Selecting radio mode
RADIO
Notes on radio reception
Your car radio is subject to pheno-
mena which do not affect domestic
radio sets. Both AM and FM recep-
tion are subject to various forms of
interference. This is no relection on
the quality of the equipment, but is due
to the nature of the signals and the
way in which they are transmitted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of increasing distance from the trans-
mitter, delection of the signals by
obstacles (mountains, hills, buildings,
etc.), or of being in an area which is
not covered by a transmitter.
Selecting a waveband
Press button
O several times in suc-
cession to select wavebands FM1,
FM2, FMast and AM.
Automatic station search
Briely press button
J or L to search
for the station immediately above or
below. By continuing to press the
button in the direction selected, you
will obtain continuous scrolling of the
frequency.
The scrolling stops at the irst sta-
tion found as soon as the button is
released.
If the
TA trafic program is selected,
only stations broadcasting this type
of program are selected.
Searching for a station occurs irst
in
"LO" sensitivity (selection of the
most powerful transmitters) during
scanning of the waveband, then in
"DX" sensitivity (selection of the
weakest and most distant transmit-
ters).
To make a direct search in
"DX" sen-
sitivity, press button
J or L twice.
Adjusting the right/left sound
distribution (Balance)
When
"BAL" is displayed, press but-
ton
H or I.
Button
H increases the volume on
the right-hand side.
Button
I increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons
H or I to switch the
function on or off.
38 - Audio equipment and telematics
01-10-2005
39
-
Audio equipment and telematics
01-10-2005
Manual station search
Manual storing of stations in the
memory
Select the station required.
Press one of the buttons
"1" to "6"
for more than two seconds.
The sound stops then becomes audi-
ble again, conirming that the station
has been stored in the memory.
Press button
O down
for more than two
seconds.
Your radio automati-
cally stores the six stations with the
strongest signal in
FM. These sta-
tions are stored in the FMast wave-
band.
If it is not possible to ind 6 stations,
the remaining memories are empty.
Automatic storing of FM stations
in the memory (autostore)
Recalling stations stored in the
memory
For each waveband, briely press
one of the buttons
"1" to "6" to recall
the corresponding station.
RDS
Using the RDS (Radio Data
System) function on FM
Radio Data System allows you to
continue listening to the same station
whatever frequency it is using for the
region you are going through.
Briely press the
"RDS"
button to switch the
function on or off.
The multifunction display will show:
-
"RDS" if the function is selected,
-
"RDS" lashing or "(RDS)" if the
function is selected but not available.
Press the
"MAN" button.
Briely press button
J or L to in-
crease or decrease the frequency
displayed.
By continuing to press the button
in the direction selected, you will
obtain continuous scrolling of the
frequency.
The scrolling stops at the irst sta-
tion found as soon as the button is
released.
Pressing the
"MAN" button again
returns you to automatic station
search.
RDS station following
The display indicates the name of
the station selected. When the RDS
function is active, the radio continual-
ly searches for the transmitter which
transmits the station selected with
the best reception.
40 - Audio equipment and telematics
01-10-2005
41
-
Audio equipment and telematics
01-10-2005
Press the
"TA" button
briely to switch the
function on or off.
The multifunction display will show:
-
"TA" if the function is selected,
-
"TA" lashing or "(TA)" if the func-
tion is selected but not available.
Any trafic information lash will be
given priority, whatever source you
are listening to (radio, CD or CD
changer).
If you wish to interrupt a message,
press the
"TA" button; this switches
the function off.
Note: the volume of the trafic
information is independent of the
volume of normal radio listening.
You can adjust it using the volume
button. The setting will be stored
and will be used when the next
messages are broadcast.
Trafic information program (TA)
Regional following mode (REG)
When they are part of a network,
certain stations broadcast regional
programs in the various areas they
serve. With regional following mode
you can keep listening to the same
program.
Press the
"RDS" button for more
than two seconds to switch the func-
tion on or off.
With
FM selected,
press the
"TA" but-
ton for more than two
seconds to switch this
function on or off.
Search by type of program (PTY)
This allows you to listen to stations
broadcasting a speciic type of program
(news, culture, sport, rock etc.).
To search for a
PTY program:
- select the
PTY function,
- briely press button
J or L to scroll
down the list of the various types of
programs offered,
- when the program of your choice
is displayed, keep button
J or L
pressed for more than two seconds
to carry out an automatic search
(after an automatic search the
PTY
function is switched off).
In
PTY mode the different types of
programs can be stored in memory.
To do this, press the preselection
buttons
"1" to "6" for more than two
seconds. Briely press the corre-
sponding button to recall the type of
program stored in the memory.
EON system
This connects stations which are part
of the same network. It enables the
broadcasting of trafic information or
of a type of
program by a station that
is part of the same network as the sta-
tion to which you are listening.
This service is available when you
have selected the
TA trafic informa-
tion program or the
PTY search by
type of program function.
40 - Audio equipment and telematics
01-10-2005
41
-
Audio equipment and telematics
01-10-2005
COMPACT DISC
Selecting CD mode
After insertion of a disc, printed face
upwards, the player starts automati-
cally.
If a disc is already
inserted, press but-
ton
N.
Ejection of a disc
Accelerated play
Keep button
J or L pressed for for-
wards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Press button
F to
eject the disc from the
player.
Selecting a track
Press button
J to select the next
track.
Press button
L to return to the start
of the current track or to select the
previous track.
The use of copied compact
discs may cause malfunc-
tions.
Insert circular compact discs
only.
Random play (RDM)
When the CD player is selected,
keep button
N pressed for two sec-
onds. The tracks will be played in
random sequence. Pressing the
button again for two seconds returns
you to normal play.
Random play mode is de-activated
each time the audio equipment is
switched off.
42 - Audio equipment and telematics
01-10-2005
43
-
Audio equipment and telematics
01-10-2005
CD CHANGER
Selecting CD changer mode
Press button
M.
Selecting a disc
Press one of the buttons
"1" to "5"
on the radio to select the correspond-
ing disc.
Press button
J to select the next
track.
Press button
L to return to the start
of the current track or to select the
previous track.
Selecting a track
Accelerated play
Keep button
J or L pressed for for-
wards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Random play (RDM)
When the CD changer is selected,
keep button
M pressed down for two
seconds. The tracks will be played
in random sequence. Pressing the
button again for two seconds returns
you to normal play.
The use of copied compact
discs may cause malfunc-
tions.
Insert circular compact discs
only.
42 - Audio equipment and telematics
01-10-2005
43
-
Audio equipment and telematics
01-10-2005
CD CHANGER
This is located in the glove box. It
holds up to 5 discs.
To load the changer, insert the discs
with the printed side upwards.
To select a disc, press the corre-
sponding button
"1" to "5" briely.
Play starts automatically.
To remove a disc, press the corre-
sponding button
"1" to "5" for more
than two seconds.
The use of copied compact
discs may cause faults.
Insert circular compact discs
only.
44 - Audio equipment and telematics
01-10-2005
AUDIO SYSTEM
Presentation
Your 1007 is itted with a JBL Audio
system, designed speciically for the
vehicle's passenger compartment.
At the heart of the system, a 240 Watt
multifunction ampliier (1), located in
the boot, independently controls 8
high acoustic deinition speakers
and a subwoofer.
This system makes it possible to
obtain optimum reproduction and
distribution of the sound in the ve-
hicle, in the front and in the rear.
The speakers are located:
- in the fascia: two
Woofers (2) for
reproduction of the bass tones (low
frequencies) and two
Tweeters (3)
for reproduction of the treble tones
(high frequencies),
- in the rear panels: two
Tweeters
(4) incorporated in two woofers
(5) for a balance of the frequencies
and a sound effect which ills the
passenger compartment,
- in the right storage tray: a speciic
Subwoofer (6) for reproduction of
the extreme bass sounds (low and
very low frequencies) throughout
the passenger compartment.
You will appreciate the dynamic
nature and depth of the JBL sys-
tem, noticing that the sound ills
the vehicle perfectly.
Adjustment in CD and radio mode
The basic functions remain those of
the audio equipment.
No additional adjustment is required.
However, to beneit fully from your
JBL audio system, you are advised to
adjust the AUDIO functions
(BASS,
TREB, FAD, BAL) to position "0"
(zero) and the Loudness
(LOUD) to
the
"ON" position in CD mode and to
the
"OFF" position in radio mode.
45
-
Audio equipment and telematics
01-10-2005
GPS AUDIO/TELEPHONE RT3
Stalk movement
Function
1 - Press
Increase volume
2 - Press
Decrease volume
3 - Press
Switch off sound (mute); restore sound by pressing a button
4 - Press
Automatic search of upper frequencies (radio) -
Selection of next track (CD/MP3/CD changer)
Continuous pressure until release: accelerated forwards play (CD/CD changer),
rapid scanning of following tracks (MP3)
5 - Press
Automatic search of lower frequencies (radio) -
Selection of previous track (CD/MP3/CD changer)
Continuous pressure until release: accelerated backwards play (CD/CD changer),
rapid scanning of previous tracks (MP3)
6 - Press
Displaying of the trip computer information
Press for more than 2 seconds: resetting of the route displayed to zero
46 - Audio equipment and telematics
01-10-2005
47
-
Audio equipment and telematics
01-10-2005
Button
Function
A
Press: audio/telephone on/off.
Rotation: volume adjustment.
B
5
Ejection of CD.
C
SOURCE
Selection of source: radio, CD,
MP3, CD changer or AUX.
D
Call connect (Tel/Incoming call) - Display contextual menu (Tel/Not engaged).
E
Access "PEUGEOT" services menu (if the options and services are available).
F
MODE
Change display.
G
Press: display contextual menu of display - Conirm inputting or adjustment.
Rotation: move within a menu - Select function/parameter - Audio settings: sound ambience, bass,
treble, loudness, fader (front/rear balance), balance (left/right balance), automatic volume.
H
5
Adjust higher frequency, step by step or continuous (long press).
Select previous MP3 directory (MP3).
Select previous CD (CD changer).
I
6
Adjust lower frequency, step by step or continuous (long press).
Select following MP3 directory (MP3).
Select following CD (CD changer).
J
Infra-red window (IrDA).
K
ESC
Cancel current operation.
L
SIM card cover.
M
8
Automatic search of higher frequency - Selection of following CD track.
Double press : change from LO mode to DX mode.
Press for more than 2 seconds: CD accelerated forwards play (CD/CD changer), rapid scanning of
the following tracks (MP3).
46 - Audio equipment and telematics
01-10-2005
47
-
Audio equipment and telematics
01-10-2005
Button
Function
N
7
Automatic search of lower frequency - Selection of previous CD track.
Double press: change from LO mode to DX mode.
Press for more than 2 seconds: CD accelerated backwards play (CD/CD changer), rapid scanning
of the previous tracks (MP3).
O
DARK
1st press: display top band (remainder of screen is black) -
2nd press: brightness removed (black screen) - 3rd press: return to normal screen.
Press for more than 10 seconds: reinitialisation of the system.
P
MENU
Display general menu - Press for more than 2 seconds: display help screen with list of voice
commands, a description of the version of your equipment, a demonstration mode and the status of
the services.
Q
Disconnect.
R
BAND
AST
Select FM1, FM2, FMast, AM wavebands.
Press for more than 2 seconds: automatic storing of stations (autostore).
S
TA/PTY
Trafic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
T
RDS
RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
U
AUDIO
Display window for adjusting sound ambience, bass, treble, loudness, sound distribution and
automatic correction of volume.
V
SOS
Press between 2 and 8 seconds: emergency call.
1 to 6 1 2 3 4 5 6
Select station in memory.
Press more than 2 seconds: store station being listened to in memory.
1 to 5
1 2 3 4 5
Selection of CDs in the CD changer.
0 to 9
* #
0 1 2 3 4 5
6 7 8 9 * # Alphanumeric keypad for entering text and telephone numbers.
48 - Audio equipment and telematics
01-10-2005
49
-
Audio equipment and telematics
01-10-2005
SELECTING THE SOURCE
Press the
SOURCE button to select
the audio source: RADIO, CD, CD
CHANGER, MP3 or audio/video aux-
iliary input (AUX)*.
GENERAL MENU
Pressing button
"P" provides access
to all of the functions available on the
RT3 GPS audio/telephone:
"Navigation - Trafic info".
"Audio functions".
"Directory".
"Telephone and telematic serv-
ices".
"Coniguration" of your vehicle.
"Map"*.
"Video"*.
SCREEN
In accordance with your selections,
the screen displays the information
relating to the Navigation - Traf-
ic Information, Audio, Directory,
Telephone and Telematic Services,
Coniguration*, Map* and Video*
functions.
It is possible to change the informa-
tion displayed on the right-hand side
of your screen by pressing
"F", "G",
"P" and "U", or using the voice com-
mands.
The information on the left-hand side
and at the top of the screen depends
on the selection made for the right-
hand side.
Some information and actions (warn-
ing, settings, contextual menu) are
indicated by the temporary opening
of a window on the screen.
MOVING WITHIN THE MENUS
Buttons
"G", "H", "M", "I", "N" en-
able you to move within the menus
and pressing button
"G" conirms
your selections.
We recommend that you do not use
the RT3 GPS audio/telephone but-
tons while driving. In some countries,
certain buttons may be deactivated
(in accordance with national legisla-
tion).
* According to screen.
Auxiliary Input (AUX)*
The auxiliary input allows the con-
nection of portable equipment (MP3
player, ...).
F
Activate the auxiliary input via
the
"Coniguration" menu, then
"Sound" and inally "Activate aux
input
".
F
Connect the portable equipment
to the audio sockets (white and
red, type RCA) located in the
glovebox.
F
Press the
SOURCE button suc-
cessively and select AUX.
48 - Audio equipment and telematics
01-10-2005
49
-
Audio equipment and telematics
01-10-2005
GENERAL FUNCTIONS
On/off
With the ignition switch
in the accessories/
running position or
with the ignition on,
press button
A to
switch the audio func-
tion of the RT3 GPS
audio/telephone
on
or off.
Note: in the absence of an ignition
key, press button
A to switch the
telematics system on or off.
The RT3 GPS audio/telephone can
operate for 30 minutes without
switching the vehicle ignition on.
ADJUSTING THE VOLUME
Turn button
A clockwise to increase
the volume of the audio/telephone or
anti-clockwise to decrease it.
Anti-theft system
The RT3 GPS audio/telephone is
coded in such a way that it can op-
erate only on your vehicle. If itting
it to another vehicle, consult your
PEUGEOT dealer for coniguration
of the system.
The anti-theft system is automatic
and requires no action on your
part.
MUTE
Notes:
- the SIM card must be removed only
after the audio/telephone has been
switched off,
- following automatic switching off of
the audio/telephone after 30 minutes
it is possible to make a telephone call
by pressing button
D,
- after the ignition has been switched
off, the audio/telephone can be
switched on again by pressing but-
tons
D, E, V or by inserting a CD in
the player.
AUDIO SETTINGS
Press button
U to ac-
cess the
Sound Am-
bience, Bass, Treble,
Loudness,
Fader
(front/rear balance),
Balance (left/
right balance) and
Automatic vol-
ume adjustment setting windows.
Exit from audio mode is automatic af-
ter a few seconds without any action,
or by pressing the
"ESC" button.
Note: bass, treble and loudness set-
tings are speciic to each source. It is
possible to have different settings for
radio, CD MP3, CD changer or AUX.
Notes
The volume setting is speciic to each
source. It is possible to have different
settings for radio, CD, CD or AUX.
The volume is adjusted automatically
in relation to the speed if the
auto-
matic volume function is active.
The volume when stationary will be
the same the next time the audio
equipment is switched on.
Use the controls on
the steering wheel to
activate this function.
The sound is cut off,
regardless of which
source is in use.
The permanent audio
sources (radio, CD,
CD changer, MP3, auxiliary input) re-
main cut off but not the others (guid-
ance instructions, for example).
To restore the sound, press one of
the two volume buttons.
You can also increase
or decrease the vol-
ume using the con-
trols on the steering
wheel.
50 - Audio equipment and telematics
01-10-2005
51
-
Audio equipment and telematics
01-10-2005
Sound ambience
This function per-
mits the selection of
a "None", "Rock",
"Classical",
"Jazz",
"Vocal" or "Techno"
sound ambience.
Turn button
G to select
the sound ambience.
Selecting "None" permits access
to all of the settings deined below.
Selecting another ambience sets the
bass and treble automatically.
Bass setting
When
'Bass' is displayed, turn but-
ton
G to vary the setting.
- '-9' for minimum bass setting
- '0' for normal setting
- '+9' for maximum bass setting
Treble setting
When
'Treble' is displayed, turn but-
ton
G to vary the setting.
- '-9' for minimum treble setting
- '0' for normal setting
- '+9' for maximum treble setting
Adjusting the loudness
This function automatically empha-
sises bass and treble tones when the
volume is low.
Rotate button
G to switch the func-
tion on or off.
Setting the front/rear sound
distribution (Fader)
When
'Fader' is displayed:
- Turn button
G clockwise to increase
the volume in the front.
- Turn button
G anti-clockwise to in-
crease the volume in the rear.
Setting the right/left sound
distribution (Balance)
When
"Balance" is displayed:
- Turn button
G clockwise to increase
the volume on the right.
- Turn button
G anti-clockwise to in-
crease the volume on the left.
Automatic volume adjustment
This function allows the volume to
be adjusted automatically depending
on the level of noise produced by the
speed of the vehicle.
Press button
G to switch the function
on or off.
