Peugeot 1007 (2008 year). Instruction - part 12

181

QUESTION

SOLUTION

RESPONSE

The stored stations do
not function (no sound,

87.5 Mhz is displayed...)

An incorrect waveband is selected.

Press the BAND AST button to return to the

waveband (AM, FM1, FM2, FMAST) on which the
stations are stored.

The traffi c announcement

(TA) is displayed. I do

not receive any traffi c
information.

Tune to a radio station which broadcasts traffi c
information.

The radio station is not part of the regional traffi c information network.

The quality of reception
of the radio station
listened to gradually
deteriorates or the
stored stations do
not function (no
sound, 87.5 Mhz is

displayed...).

The vehicle is too far from the transmitter used by the station listened to or
there is no transmitter in the geographical area through which the vehicle
is travelling.

The environment (hills, buildings, tunnels, basement car parks...) block
reception, including in RDS mode.

The aerial is absent or has been damaged (for example when going

through a car wash or into an underground car park).

Activate the RDS function to enable the system
to check whether there is a more powerful
transmitter in the geographical area.

This phenomenon is normal and does not
indicate a failure of the audio equipment.

Have the aerial checked by a PEUGEOT dealer.

Sound cut-outs of 1
to 2 seconds in radio
mode.

During this brief sound cut-out, the RDS searches for any frequency
permitting better reception of the station.

Deactivate the RDS function if the phenomenon
is too frequent and always on the same route.

With the engine off,
the audio equipment
switches off after a few
minutes of use.

When the engine is switched off, the audio equipment operating time
depends on the battery charge.
The switch-off is normal: the audio equipment switches to economy mode
and switches off to prevent discharging of the vehicle's battery.

Start the vehicle's engine to increase the battery
charge.

The message "the audio
system is overheated"
appears on the display.

Switch the audio system off for a few minutes to
allow the system to cool.

In order to protect the installation if the surrounding temperature is too
high, the audio equipment switches to an automatic thermal protection
mode leading to a reduction of the volume or stopping of the playing of the
CD.

182

QUESTION

SOLUTION

RESPONSE

The TRAFFIC INFO
box is ticked. However,

certain traffi c jams
along the route are not
indicated in real time.

On starting, it is several minutes before the system begins to receive the

traffi c information.

Wait until the traffi c information is being received

correctly (displaying of the traffi c information

symbols on the map).

In certain countries, only major routes (motorways, ...) are listed for the

traffi c information.

The time taken to calculate
a route sometimes seems
longer than usual.

This phenomenon is normal. The system is

dependent on the traffi c information available.

The performance of the system may slow down temporarily if a CD is
being copied onto the Jukebox at the same time as a route is being
calculated.

Wait until the CD has been copied or stop the
copying before starting the guidance function.

Does the emergency call
function work without a
SIM card?

No, European regulations impose the presence of a SIM card in order to
make an emergency call.

Insert a valid SIM card in the slot on the RT4 GPS
audio/telephone.

My SIM card is not
recognised.

The RT4 accepts 3.3 V SIM cards, the old 5 V and 1.8 V SIM cards are not
recognised.

Contact your telephone operator.

After changing a wheel,
the system loses its
location.

The RT4 GPS audio/telephone uses the wheel rotation information to

improve the GPS locating function. If a wheel is changed or defl ates
suddenly, the system recalculates the location. For approximately ten
minutes, this recalculation may affect the quality of the locating function.

Wait until the system has completed its
recalculation.

The table below groups together the answers to the most frequently asked questions concerning the RT4 audio/telephone.

The location on the
map is incorrect or
inaccurate.
The altitude is not
displayed.

On starting, the initialisation of the GPS may take up to 3 minutes to
receive more than 3 satellites correctly.

Wait until the system has started up completely.
Check that there is a GPS coverage of at least
3 satellites (long press on the MENU button, then
select AUDIO/TELEPHONE DIAGNOSTICS, then

GPS COVERAGE).

Depending on the geographical environment (tunnel, ...) or the weather,
the conditions of reception of the GPS signal may vary.

This phenomenon is normal. The system is
dependent on the conditions of reception of the
GPS signal.

169

RD4

CONTENTS

• 01 First steps

pg. 170

• 02 General menu

pg. 171

• 03 Audio

pg. 172

• 04 Hands-free kit

pg. 175

• 05 Control short-cuts

pg. 176

• 06 Confi guration

pg. 177

• 07 Display fl ow charts

pg. 178

• Frequently asked questions pg. 180

The SERVICE BOX internet site provides additional
animated information about the RD4. It can be consulted
at the following address:
http://public.servicebox.peugeot.com.
Simple registration permits access and free consultation
of the handbook.

The RD4 audio equipment is coded in such a way that
it will only operate in your vehicle. If it is to be installed
in another vehicle, contact a PEUGEOT dealer for

confi guration of the system.

For safety reasons, the driver must carry out operations
which require prolonged attention while the vehicle is
stationary.
When the engine is off, and in order to prevent
discharging of the battery, the RD4 audio equipment may
switch off after a few minutes.

AUDIO EQUIPMENT/HANDS-FREE KIT

01

1

1

2

2

10

10

11

11

13

13

14

14

15

15

3

3

4

4

55

6

6

7

7

8

8

99

12

12

170

FIRST STEPS

1.

On/Off and volume adjustment.

2.

CD eject.

3.

Selection of the screen display mode.

4.

Selection of the source: radio, CD and CD changer.

5. Selection of the FM1, FM2, FMast and AM wavebands.

6.

Setting the audio options: front/rear balance, left/right

balance, loudness, sound ambiences.

7.

Displaying of the list of local stations, of the tracks on the CD

or of the MP3 directories.

8.

Abandon current operation.

9. TA (Traffi c Announcement) function on/off. Long press: access

to the PTY (TYpes of radio Programme) mode.

10.

Confi rmation.

11. Automatic search for a lower/higher frequency.Selection of

previous/next CD or MP3 track.

12. Selection of a lower/higher radio frequency.

Selection of the previous/next CD.

Selection of the previous/next MP3 directory.

13. Displaying of the general menu.

14. Buttons 1 to 6:

Selection of a stored radio station.

Selection of a CD in the CD changer.

Long press: storing of a station.

15. The DARK button changes the display on the screen to

improve driving comfort at night.

1st press: lighting of the top banner only.

2nd press: black screen display.

3rd press: return to the standard display.

02

171

GENERAL MENU

AUDIO FUNCTIONS: radio, CD,
options.

TRIP COMPUTER: distance entering,
warnings, status of functions.

TELEPHONE: hands-free kit,
matching, management of a
communication.

PERSONALISATION-CONFIGURATION:
vehicle parameters, display, languages.

> MONOCHROME DISPLAY C

> MONOCHROME DISPLAY A

For a detailed global view of the
menus available, refer to the

"Display fl ow charts" section of
this RD4 chapter.

1

1

2

2

3

3

4

4

2

2

4

4

3

3

1

1

03

172

AUDIO

RADIO

Press the SOURCE button several
times in succession and select the
radio.

Press the BAND AST button to select
a waveband: FM1, FM2, FMast, AM.

Briefl y press one of the buttons to
carry out an automatic search of the
radio stations.

Press one of the buttons to carry out a
manual search of the radio stations.

Press the LIST REFRESH button to
display the list of stations received

locally (30 stations maximum).
To update this list, press for more than
two seconds.

Select ACTIVATE FREQUENCY

FOLLOWING (RDS) then press OK.
RDS appears on the display.

Select the FM WAVEBAND
PREFERENCES function then press
OK.

Select AUDIO FUNCTIONS then
press OK.

Press the MENU button.

FM WAVEBAND PREFERENCES

ACTIVATE FREQUENCY FOLLOWING (RDS)

The external environment (hills, buildings, tunnels, basement car parks) may block reception, including
in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not

indicate any failure of the audio equipment.

RDS

The RDS, if displayed, enables you to continue listening to the
same station by means of frequency following. However, in certain
conditions, this RDS station is not followed throughout the country
as radio stations do not cover 100 % of the territory. This explains
the loss of reception of the station during a journey.

SELECTING A STATION

1

1

2

2

173

Insert circular compact discs only.
Some anti-pirating systems, on original discs or CDs
copied using a personal recorder, may cause faults

which are no refl ection on the quality of the original
player.

Without pressing the EJECT button, insert a CD in the
player, play begins automatically.

Press one of the buttons to select a
track on the CD.
Press the LIST REFRESH button to
display the list of tracks on the CD.

To play a disc which has already been
inserted, press the SOURCE button
several times in succession and select
CD.

CD

PLAYING A CD

MP3 CD

The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3,
is an audio compression standard which permits the recording of

several tens of music fi les on a single disc.

The playing and displaying of an MP3 compilation may depend on
the recording programme and/or the parameters used.

In order to be able to play a recorded CDR or CDRW, when recording
select standards ISO 9660 level 1.2 or Joliet.
If the disc is recorded in another format, it may not be played
correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as possible for optimum
sound quality.
In the particular case of a multi-session CD, the Joliet standard is
recommended.

The audio equipment will only play fi les with the extension ".mp3". No

other type of fi le (.wma, .mp4...) can be played.

It is advisable to restrict fi le names to 20 characters without using

special characters (e.g.: " " ? ; ù) to avoid any playing or displaying
problems.

INFORMATION AND ADVICE

1

1

2

2

1

1

2

2

3

3

174

Insert an MP3 compilation in the player.
The audio equipment searches for all of the music
tracks, which may take anything between a few
seconds and several tens of seconds, before play
begins.

On a single disc, the CD player can read up to 255 MP3 fi les spread
over 8 directory levels. However, it is advisable to keep to a limit of
two levels to reduce the access time before the CD is played.

CD

To play a disc which has already been
inserted, press the SOURCE button
several times in succession and
select CD.

Press one of the buttons to select a
track on the CD.
Press the LIST REFRESH button to
display the list of directories of the
MP3 compilation.

PLAYING AN MP3 COMPILATION

CD CHANGER

Insert the CDs in the changer one by one.

Press the SOURCE button several
times in succession and select CD
CHANGER.

Press one of the buttons on the
numeric keypad to select the
corresponding CD.

Press one of the buttons to select a
track on the CD.
Press and hold one of the buttons for
fast forwards or backwards play.

PLAYING A CD (NOT MP3 COMPATIBLE)

1

1

2

2

3

3

1

1

2

2

4

4

1

1

04

175

HANDS-FREE KIT

MATCHING A TELEPHONE

DISPLAY C

Select the accessory which corresponds to the

name of the vehicle, a superimposed confi guration
display appears on the multifunction display.

Activate the telephone's Bluetooth function and
carry out a search of the Bluetooth accessories
present for the telephone.

Select the YES tab on the display

using the buttons then confi rm by
pressing OK.

Enter the vehicle's authentication code (=1234).
Depending on the telephone, you may be asked
to enter this code before the superimposed

confi guration display appears.

YES

YES

The services offered by the hands-free kit depend on the network, the SIM
card and the compatibility of the Bluetooth equipment used.

Consult your telephone's manual and your operator to fi nd out which
services are available to you. A list of mobile telephones which offer the
best range of services is available from the network. Contact a PEUGEOT
dealer.

RECEIVING A CALL

An incoming call is announced by a ring and a superimposed display
on the multifunction display.

Select the YES tab on the display

using the buttons and confi rm by
pressing OK.

Press the end of the steering wheel stalk to accept
the call.

Press the end of the steering wheel stalk for more
than two seconds to access your directory.

To dial a number, use the keypad on your
telephone.

MAKING A CALL

For safety reasons and because they require prolonged attention
on the part of the driver, the operations for matching of the
Bluetooth mobile telephone with the RD4 hands-free kit must be
carried out with the vehicle stationary and the ignition on.

05

176

RADIO: selection of the next stored station.
CD CHANGER: selection of the next CD.
Selection of the next item on a menu.

RADIO: selection of the previous stored station.
CD CHANGER: selection of the previous CD.
Selection of the previous item on a menu.

RADIO: automatic search for a higher frequency.
CD/CD CHANGER/MP3: selection of the next track.
CD/CD CHANGER: continuous press: fast forwards
play.
Selection of the previous item.

RADIO: automatic search for a lower frequency.
CD/CD CHANGER/MP3: selection of the previous
track.
CD/CD CHANGER: continuous press: fast backwards
play.
Selection of the next item.

Volume increase.

Volume decrease.

CONTROL SHORT-CUTS

Mute: by pressing
the volume increase
and decrease buttons
simultaneously.

The sound is restored by
pressing one of the two
volume buttons.

- Change of sound source.

- Confi rmation of a selection.
- Pick up/Hang up the telephone.
- Press for more than 2 seconds:

access to the telephone menu.

STEERING WHEEL CONTROLS

55

6

6

7

7

8

8

1

1

2

2

3

3

4

4

06

177

CONFIGURATION

ADJUSTING THE DATE AND TIME

Press the MENU button.

Using the arrows, select
the PERSONALISATION
CONFIGURATION function.

Press to confi rm the selection.

Using the arrows, select the DISPLAY
CONFIGURATION function.

Press to confi rm the selection.

Press to confi rm the selection.

Using the arrows, select the ADJUST
DATE AND TIME function.

Adjust the parameters one by one

confi rming by pressing the OK button.
Next select the OK tab on the display

then confi rm.

DISPLAY CONFIGURATION

ADJUST DATE AND TIME

OK

PERSONALISATION CONFIGURATION

DISPLAY C

1

2

3

3

2

3

3

2

3

3

2

3

3

2

3

3

1

2

3

3

2

3

3

1

2

3

3

1

2

2

2

2

2

2

1

2

2

2

2

2

2

2

2

1

2

2

1

2

3

2

3

07

178

DISPLAY FLOW CHART monochrome A

A

MAIN FUNCTION

CHOICE A
Choice A1

Choice A2
CHOICE B...

RADIO-CD

RDS SEARCH

active

inactive

REG MODE

active

inactive

INTROSCAN

active

inactive

CD REPEAT

active

inactive

* The parameters vary according to vehicle.

RANDOM PLAY

active

inactive

VEHICLE CONFIG *

REV WIPE ACT

active

inactive

GUIDE LAMPS

active

inactive

OPTIONS

ABANDON/CONSULT LIST OF FAULTS

functions activated (or not)

warning messages

DISPLAY ADJUST

YEAR

MONTH

DAY

HOUR

MINUTES

12 H/24 H MODE

LANGUAGES

FRANCAIS

ITALIANO

NEDERLANDS

PORTUGUES

PORTUGUES-BRASIL

DEUTSCH

ENGLISH

ESPANOL

UNITS

TEMPERATURE: °CELSIUS/°FAHRENHEIT

FUEL CONSUMPTION: KM/L - L/100 - MPG

1

1

2

3

4

3

4

3

4

2

3

4

3

4

2

3

4

2

4

4

3

4

4

4

3

4

4

1

2

3

2

3

2

1

2

3

3

3

4

4

4

2

3

4

3

4

3

4

2

3

3

3

4

3

2

07

179

DISPLAY FLOW CHART monochrome C

AUDIO FUNCTIONS

FM BAND PREFERENCES

alternative frequencies (RDS)

activate/deactivate

regional mode (REG)

activate/deactivate

radio-text information (RDTXT)

activate/deactivate

AUDIO CD PREFERENCES

cd changer repeat (RPT)

activate/deactivate

track random play (RDM)

activate/deactivate

TRIP COMPUTER

ENTER DISTANCE TO DESTINATION

distance: x km

WARNING LOG

diagnostics

STATUS OF FUNCTIONS *

functions activated or deactivated

* The parameters vary according to vehicle

(refer to the "Multifunction displays" chapter).

PERSONALISATION-CONFIGURATION

DEFINE THE VEHICLE PARAMETERS *

DISPLAY CONFIGURATION

video brightness adjustment

normal video

inverse video

brightness (- +) adjustment

date and time adjustment

day/month/year adjustment

hour/minute adjustment

choice of 12 h/24 h mode

choice of units

l/100 km - mpg - km/l

°Celsius/°Fahrenheit

CHOICE OF LANGUAGE

TELEPHONE

CONSULTING DIRECTORIES **

telephone directory

call log

services directory

customer contact centre

breakdown call

emergency call

CONFIGURATION

deletion of a match

list of matches

consulting matches

list of matches

choice of a mobile to connect

list of mobiles

MANAGEMENT OF A COMMUNICATION

switch **

terminate the current call

secret mode

activate/deactivate

** According to compatibility of Bluetooth telephone

and service contract.

Рассказать друзьям

Страницы