Jaguar Vehicle Specifications (2003 year). Instruction - page 9
Engine Oil – Specification and Capacity
31
S-TYPE: 2000 up to 2002.5 MY
3.0 liter
NAS
API SL and ILSAC GF–3
5.7 (6.0)
–
L31321
L37177
6.5 (6.9)
–
L37178*
M45254
ROW
API SJ / EC and ACEA A1 or A3
Jaguar WSS–M2C913–B preferred
5.7 (6.0)
–
L31321
L37177
6.5 (6.9)
–
L37178*
M45254
4.0 liter
NAS
API SL and ILSAC GF–3
6.0 (6.4)
–
L31321
M45254
ROW
API SJ / EC and ACEA A1 or A3
Jaguar WSS–M2C913–B preferred
Note: To signify the oil capacity change to S-TYPE V6 engines during 2000 MY, a new style oil-level gauge was introduced. The new style gauge can be
recognized by a loop handle opposed to the old T-bar design. The oil fill mark on the oil-level gauge was also altered by 14 mm. The change was
implemented at approximate VIN*.
Note: Refer to the end of this section for important information.
Notes
Model/Engine
Market
Oil Specification
Engine Oil Capacity
(service oil fill and
filter change)
Liters (US Quarts)
VIN
oil cooler
non oil cooler
From
To
Engine Oil – Specification and Capacity
32
S-TYPE: 2002.5 MY onwards
2.5 liter
NAS
API SL and ILSAC GF–3
6.5 (6.9)
–
M45255
Current
ROW
API SJ / EC and ACEA A1 or A3
Jaguar WSS–M2C913–B preferred
3.0 liter
NAS
API SL and ILSAC GF–3
6.5 (6.9)
6.5 (6.9)
ROW
API SJ / EC and ACEA A1 or A3
Jaguar WSS–M2C913–B preferred
6.5 (6.9)
–
4.2 liter
NAS
API SL and ILSAC GF–3
6.0 (6.4)
–
ROW
API SJ / EC and ACEA A1 or A3
Jaguar WSS–M2C913–B preferred
4.2 liter –
supercharged
NAS
API SL and ILSAC GF–3
6.0 (6.4)
–
ROW
API SJ / EC and ACEA A1 or A3
Jaguar WSS–M2C913–B preferred
Note: Refer to the end of this section for important information.
Notes
Model/Engine
Market
Oil Specification
Engine Oil Capacity
(service oil fill and
filter change)
Liters (US Quarts)
VIN
oil cooler
non oil cooler
From
To
Engine Oil – Specification and Capacity
33
X-TYPE: 2001.5 MY onwards
2.0 liter Gasoline
NAS
API SL and ILSAC GF–3
5.8 (6.1)
–
C00344
Current
ROW
API SJ / EC and ACEA A1 or A3
Jaguar WSS–M2C913–B preferred
2.0 liter Diesel
EUR
Jaguar WSS–M2C913–B only
6.2 (6.5)
–
2.5 liter
NAS
API SL and ILSAC GF–3
5.8 (6.1)
–
ROW
API SJ / EC and ACEA A1 or A3
Jaguar WSS–M2C913–B preferred
3.0 liter
NAS
API SL and ILSAC GF–3
5.8 (6.1)
–
ROW
API SJ / EC and ACEA A1 or A3
Jaguar WSS–M2C913–B preferred
Caution: The use of supplementary oil or fuel additives is not approved unless specified by Jaguar Cars in the form of a service communication or directive.
V6 gasoline engine oil specification (NAS): Synthetic oil meeting the following specification may be used API SL and ILSAC GF–3.
V6 gasoline engine oil specification (ROW): Synthetic oil meeting the following specification may be used API SJ / EC and ACEA A1 or A3.
SAE Viscosity Rating: For climates ranging from –30°C (–22°F) and +50°C (+122°F), the following oil viscosities may be used:
0W–30
5W–30 (preferred)
0W–40
5W–40
Model/Engine
Market
Oil Specification
Engine Oil Capacity
(service oil fill and
filter change)
Liters (US Quarts)
VIN
oil cooler
non oil cooler
From
To
Rear Axle Differential Ratio
34
Notes
Model/Engine
VIN
Market
Final Drive Ratio
From
To
XJ: 1998 up to 2003.5 MY
3.2 liter
812317
F59525
ROW
3.27 : 1
4.0 liter
NAS
3.06 : 1
ROW
Mexico
3.27 : 1
4.0 liter – supercharged
NAS
3.06 : 1
ROW
XJ: 2003.5 MY onwards
3.0 liter
G00442
Current
NAS
3.31 : 1
ROW
3.5 liter
NAS
3.07 : 1
ROW
4.0 liter
NAS
2.87 : 1
ROW
4.0 liter – supercharged
NAS
2.87 : 1
ROW
