Jaguar S-Type. Instruction - page 20

85

Mirrors

R

Make sure that the windshield in front
of the mirror is kept clean. The
moisture sensor for wiper operation is
located to the front of the mirror
casing. Any dirt may affect the
operation of this sensor.

Driving Position Memory

86

L

Driving Position Memory

MEMORY SETTING

This optional facility enables the position
of the driver’s seat, steering column and
exterior rear view mirrors to be
memorised and recalled. Two different
driving position profiles can be entered
into the memory.

A key does not have to be in the ignition
switch for seat, mirror, steering column
adjustments, nor for memory setting.

Setting a driving position

To store a driving position in the memory:

1. Adjust the seat, steering column and

exterior rear view mirrors to the
desired positions.

2. Push the MEMORY button (A), and

the red LED in the switchpack will
illuminate for a five second period.

3. While the red LED is illuminated, push

button 1, or 2 to memorise the
configuration. The LED will go out and
a chime will indicate that the setting
procedure is complete. Additionally, if
the ignition is on (position II), the
message center will display a
message that the settings have been
saved.

By repeating these three steps and
pressing the unused button (1 or 2), a
further driving position can be stored in
the memory.

To set a new driving position, adjust to the
desired position and perform steps 2 and
3. The previous memory will be erased
and the new position will be set.

Recalling a memorised position from
the door switchpack

The gear selector lever in automatic
transmission vehicles must be in P, and
for manual transmission vehicles the
parkbrake must be applied.

Press and release the appropriate
memory button (1 or 2). The seat, steering
column and door mirrors will move
automatically to the memorised position.

Memory recall using a key transmitter

The key transmitter will recall a memory
position when the unlock button is
pressed, when set as follows:

1. Adjust the seat, steering column and

exterior rear view mirrors to the
desired positions.

2. Press the MEMORY button: the red

LED will illuminate for a five second
period.

3. Press any button on the key

transmitter and then press button 1 or
2. Both button presses must occur
while the red LED is illuminated.

4. Repeat for the other transmitter,

pressing the remaining memory
button.

To cancel key transmitter memory recall:

1. Press the MEMORY button: the red

LED will illuminate for a five second
period.

87

Driving Position Memory

R

2. Press any button on the key

transmitter (except the panic button),
then press the MEMORY button
again. Both button presses must
occur while the red LED is illuminated.

Driving position memory system
operating tips
• When making adjustments to a set

driving position, reset the new
position in the same memory channel.

• A driving position will only be

memorised during the five second
period when the red memory LED is
illuminated.

• Previous memory is erased when a

new driving position is entered.

• Make sure that the seat has

completed moving into the required
memory position before shifting the
gear selector from the P position, or in
the case of manual transmission,
releasing the parkbrake.

• If the seat memory does not recall

correctly, the seat may require to be
recalibrated. This may be due to an
interruption in the electrical supply. To
recalibrate the seat it should be
powered fully forwards and
backwards and fully upwards and
downwards.

Luggage Compartment

88

L

Luggage Compartment

LUGGAGE TIE-DOWN LOOPS

!

WARNING:

Locate heavy loads in the luggage

compartment towards the front of
the vehicle and secure them to stop
them sliding. Loose items can be a
hazard.

Do not drive with the luggage

compartment lid open, as exhaust
fumes can be drawn into the
passenger compartment.

Four metal loops are positioned in the
luggage compartment for attaching
straps to secure loads and prevent them
from sliding over the luggage floor.

These loops are not to be used for
securing passengers or animals, nor as
anchorages for child restraints.

A range of Jaguar storage accessories,
including a luggage retaining net, are
available from your Jaguar Dealer.

It is advisable to distribute luggage weight
evenly over the entire luggage floor area,
particularly to prevent permanent damage
to the seat trim when a seat has been
folded down.

Note: A luggage compartment
emergency release handle is located in
the luggage compartment lid. For further
details see page 47.

Рассказать друзьям

Страницы