Jaguar 5HP24 transmission. Instruction - page 15
2.4 Tower I
2.4.1 Brake D, E and clutch C
Lift off brake D/E as a complete unit
with clutch C.
Take out clutch C with the sun wheel
shaft.
Remove the axial needle roller bearing
from the hub of cylinder D.
Unsnap the snap ring from brake D and
take out the complete clutch pack.
2.4/1
97202
97205
97206
Using assembly bracket 5x46 001 501,
press down cup spring D with the man-
drel press, take out the snap ring, and
remove the cup spring.
Turn over cylinder D/E, take out the
brake E snap ring, and remove the com-
plete clutch pack.
Using assembly bracket 5x46 001 502,
press down cup spring E in the mandrel
press, take out the split stop ring, and
remove the cup spring.
2.4/2
97207
97029
97030
Apply the compressed-air gun to the oil
feed bore and force out pistons D and E
with compressed air.
Remove the O-rings on the cylinder and
piston E and the two O-rings on piston D.
Force the bushing out of cylinder D/E.
Remove the two O-rings from the bushing.
Press out the sun wheel shaft of the
cylinder C using a suitable mandrel. Take
the two O-rings and the two rectangular-
section rings off the shaft.
2.4/3
97208
97032
97209