JAC Pick-Up. Service Instruction - page 1

Main Technical Data

5-1

Vehicle Data

5-4

Maintenance Service

6-1

User Profile

6-2

Special Warning

6-3

List of franchised JAC service
providers

Specifications

Supplement Sheets

TABLE OF CONTENTS

General Layout

1 -01

-------------------------------------------------------------------------------------------------------------------------------------------------------------

NO窑 COMPONENT

NO窑 COMPONENT

NO窑 COMPONENT

OWNER爷S MANUAL

pick-up

1

1要要

要Lighting Switch

2要要

要Direction Lamp Switch

3要要

要Horn Button

4要要

要Combination Instrument

5要要

要Wiper Switch

6要要

要A/C Switch

7要要

要Hazard Warning Switch

8要要

要Central AC Vent

9要要

要Clutch Pedal

10要要

要Vent

11要要

要Ignition Switch

12要要

要Steering Wheel

13要要

要Brake Pedal

14要要

要AC Panel

15要要

要Glove Compartment

16要要

要Ashtray

17要要

要Cigarette Lighter

18要要

要Hood Cable

19要要

要Hand Brake

20要要

要Acceleration Pedal

21要要

要On-board Charger

22要要

要Gear Lever

23要要

要CD Player

-02

KEYS

Each pick -up comes with three
keys, two for mechanical opera鄄
tion and one for remote control.
Also the key number and pin are
provided at back of the RC key.

Caution:

Make sure to remove the ignition
key when you leave your vehicle
and always keep it with you even
for a temporary leave. In particu鄄
lar, a child may start the engine or
operate electric devices such as
the power window regulator when
he/she is left alone in the vehicle.
A key shall not be removed until
the vehicle is completely station鄄
ary! Otherwise,

the

steering

mech-anism could be locked un鄄
expectedly.

Spare Keys

Spare keys can only be provid鄄
ed at franchised JAC service
providers with a view to safety.

Key Number

The key number and pin are
provided at back of the RC key,
with which the spare keys can
be provided at franchised JAC
service providers.

Notes

Keep properly your keys, num鄄
bers and pins.
Remember to transfer these
keys when you sell this vehicle
to the other person.

1 -03

-------------------------------------------------------------------------------------------------------------------------------------------------------------

KEYS

Opening Doors

All door locks can be opened by
quickly pressing the Unlock
Button 淤 while pointing your key
to the vehicle within the speci鄄
fied range.
Safety devices and anti -theft
devices are also disabled at the
same time.

Key Matching

It could be either your key's
number does not match that of
the vehicle's in -built controller
any longer or the key's transmit鄄
ting button has been abused be鄄
yond the range, provided that
the remote key fails to open
doors.

Locking Vehicle

To lock your vehicle, press
quickly the Lock Button 于.

Notes

Spare keys can only be provid鄄
ed at franchised JAC service
providers with a view to safety.
Two remote keys are allowed in
principle.
Only the original key can guar鄄
antee reliable driving.

Environmental Protection

The used batteries shall be dis鄄
posed in a collective manner
with a view to environmental
protection.

1 -04

OWNER爷S MANUAL

pick-up

Doors and Central Control Door Lock System

Opening or locking the driver's
door can open or lock all doors
through the central control door
locking device.
The in-built safety device of cen鄄
tral door lock system can improve
anti -theft performance by en鄄
abling all internal safety tabs after
locking the door externally, which
can be achieved by a key or a
wireless

remote

transponder.

Operating Positions

External:
Driver's door, occupant's door or
wireless remote control
Internal:
Central control door lock button
on the driver's door handle

Opening Doors

To open doors, Insert your key
and turn it to the Open Position.
All safety tabs are moved up ac鄄
cordingly.
In general, all locks are operative
independently if the central con鄄
trol door lock system is out of ser鄄
vice.

Notes

In case of the inoperative central
control door locking device, you
may find it is impossible to open
the rear door. In this case, you
can send your vehicle to any of
the

franchised

JAC

service

providers.

Caution

When doors are locked externally,
anyone, and in particular for chil鄄
dren is not allowed to be left in the
vehicle, as it is impossible to open
either doors or power windows
(where applicable).

Interlocking

Insert your key into the driver's
door lock and rotate it further
when it gets locked. In this case,
all doors are locked and safety
devices are enabled immediately.

1 -05

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Power Window Regulator

Located at Driver's Door Handle
(See figure above).
1要要

要Driver's Door

2要要

要Occupant's Door

3要要

要Safety Switch

4要要

要Rear RH Door

5要要

要Rear LH Door

Individual switches are provided
additionally at the occupant's
door and rear doors (See figure
above).
The safety switch 盂 at the driver's
door handle can be used to dis鄄
able power window regulators for
both the occupant and rear doors.
Engaging safety switch: disable

Caution

Leave your ignition key in the lock
under no circumstances during your
absence, even for a temporary one.
Never leave children alone in the
vehicle. Take care to close windows
and not to damage windows.
No one shall be left in the vehicle
as an emergency egress through
windows

becomes

impossible

when doors are locked externally.

power window regulators for rear
doors.
Disengaging safety switch: en鄄
able power window regulators for
rear doors.

1 -07

If safety devices are not en鄄
gaged, doors can be opened in鄄
ternally by simply pulling knobs.
If the vehicle comes with a power
window, the opened windows
can be closed automatically.
If the driver's door are opened or
not fully closed, the rest doors
are not allowed to be locked.

Doors and Central Control Door Lock System

Central Control Door Lock Button

The central control door lock but鄄
ton is provided to open/close all
doors internally that is positioned
in the driver's handle (As shown
in figure above).

Locking

To lock all doors, press the button.
In this case, doors are not allowed
to be opened externally to stop u鄄
nauthorized

entry

(E.g.:during

stops for traffic lights)
The rest doors can be locked by
the central door lock button if the
driver's door is opened.

Caution

All doors can be locked by
pressing the central control door
lock button on the driver's door
handle.
In this case, an emergency ac鄄
cess will become more difficult.
As a result, a child shall not be
left alone in the vehicle.
Locking all doors can prevent u鄄
nauthorized entry, e.g. during
stops for traffic lights.

Opening

To unlock all doors, press the
button again.

1 -06

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Seat Belt

Why Do I Need a Seat Belt?

It is proven that safety belts can
provide you better protection. This
has led most countries to adopt
mandatory seat belt wearing law.

Caution:

Remember to wear your seat belt
for each trip, even for a short one.
This is applicable to rear seat oc鄄
cupants. Properly wearing a seat
belt will be good for a pregnant
woman that can provide best pro鄄
tection for the unborn baby!
It is extremely important to properly
wearing a seat belt as far as safety
is concerned. Please see the next
page and understand how to wear
your seat belt properly.

In case of frontal collisions, an oc鄄
cupant without a seat belt could be
thrown forward, totally uncontrolled
and being hit by interior parts such
as steering wheel, instrument panel
and windshield. A thrown -out may
be possible in some cases, which
could be fatal!
It is completely wrong idea that you
may support yourself with your
hands during a minor accident. You
can never and ever support your
body independently even at a low -
speed collision.

It is crucial for rear seat occu鄄
pants to wear seat belts as they
may lose control over themselves
and fall ahead during an accident.

An example is given in the figure
above. The rear seat occupant
could hurt both himself and the
front occupant/driver if there is no
seat belt in place.

1 -09

Power Rearview Mirror

Adjusting Interior Rearview Mirror

Make sure your interior rearview
mirror is ready to show the de鄄
sired rear view before starting
your vehicle.

Power-adjusting External Rearview Mirrors

To adjust LH external rearview
mirror, move the tab as shown to
the L position and adjust it to your
desired position while pressing
four direction buttons.

Supplementary Notes for PRM Switch

When the switch tab points to "L",
you can operate four direction
buttons and accurately position
the LH external rearview mirror,
subsequently, you can continue
to adjust the RH external rearview
mirror independently by simply
moving the tab to aim at "R".

Foldable External Rearview
Mirror
Folding Rearview Mirror

Rearview mirrors can be folded
and contained along the body.
Remember to fold rearview mir鄄
rors and avoid possible damages
before applying automatic pres鄄
sure cleaning.

Unfolding Rearview Mirror
Caution:

Never get your fingers trapped
between the rearview mirror and
its leg and be careful of personal
injuries!

1 -08

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

him/her on your knees and share
the same belt.
Avoid rigid or fragile objects under
pressure while wearing your seat
belt, such as glasses, ball pens,
etc. This may create potential
threat. Oversized clothes may ad鄄
versely affect your belt's perfor鄄
mance, e.g.: an overcoat.
To achieve maximum protection
effect, you must have a proper
gesture at right place.
Always put your feet at right place
and never attempt to place them
on the instrument panel or the
seat.
Do not block the reel with paper
or other similar objects.

Regularly examine all seat belts.
Please contact the franchised JAC
service providers for replacement
in the event of any damages to
webbing, reel or buckle.
Do not remove, modify or attempt
to repair belts by yourself.
The used or deformed belts must
be replaced at franchised JAC
service providers following an ac鄄
cident.

How to wear a safety belt
correctly

To wear a three-point seat belt
Adjust your seat to the desired
position before wearing a safety
belt.
The safety belt can allow free
slow -speed pulling and braking
during a jerk.

Caution:

A safety belt can provide you with
best protection only when the
seat back is positioned vertically
and the belt is reliably applied on
your body.

Seat Belt

1 -11

Seat Belt

A Seat Belt Do Protection

A properly worn seat belt can
successfully retain the occupant
in his/her seat, reduce kinetic
energy and protect him/her from
serious injuries.
As kinetic energy can be well-
absorbed by a seat belt, we
must properly wear it.

In the given example, we have a
frontal collision and this also do
in a similar way to other colli鄄
sions.
Remember to properly wear seat
belts for both you and other oc鄄
cupants even during a short trip.
So far we have explained how a
seat belt works during an acci鄄
dent. According to accident
statistics, wearing safety belts
can reduce the risk of injury and
has more chances for sparing
your life.
In this case, it is a mandatory re鄄
quirement to wear seat belts in a
majority of countries.

Warnings:

Remember to properly wear seat
belts for both you and other occu鄄
pants even during a short trip,
which can provide you maximum
protection.
Be sure to wear your seat belt as
described in this section.
To wear a seat belt under arms
will apparently increase the risk of
injury during an accident. Make
sure to have a free -moving belt
and never rub it against sharp
edges.
One seat belt can never be worn
by two occupants (Even for a
child). It will be extremely danger鄄
ous for the child provided you put

1 -10

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Seat Belt

Caution:

Do wear a belt even you are
pregnant. Make sure to lower
your belt as much as possible
and place it above your pelvis
across the hip bone.
Sit up straight and lean as back
as possible and keep a distance
from the steering wheel and the
instrument panel which may re鄄

Use belt height-adjusting device
to adjust and get your desired
frontal sash height.
Jerk the belt to examine whether
belt elements are operative.

duce the risk of injury to both the
mother and fetus.
Discuss with your doctor at each
pre-delivery examination and fol鄄
low his/her advice whether or not
you can drive a vehicle during
each prenatal examination.

1 -13

Caution:

Properly wearing your safety belt
and avoid serious injury resulting
from wrong doings.
Too loose belts may create po鄄
tential risk because of inertia ef鄄
fect, as your body tends to move
forward before sudden braking by
the belt.

Seat Belt

Caution:

The sash must go over the
shoulder and secure the body
correctly. Never apply it around
your neck!
The lap must go over the pelvis
and secure your pelvis correctly.
Do not apply it on your abdomen.
Retighten the strap where neces鄄
sary.

Pull the webbing attached to the
latch plate over the chest and pelvis.
Lock the latch plate in the buckle
and examine it manually, where an
expected "click" sound means
successful engagement.

Caution:

The latch plate can only be en鄄
gaged with the right buckle; other鄄
wise its performance may be af鄄
fected negatively.

1 -12

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Removing your Three -point
Belt

Press the red button on the buckle
and eject the latch plate to release
the belt.
The belt attached to the latch
plate will be retracted by the reel
automatically and a retaining ele鄄
ment provided on the belt can

A front headrest can be regulat鄄
ed in height and angle to suit an
individual's physical conditions.
Properly adjust both the headrest
and belt can provide you effec鄄
tive protection.

Seat Belt

hold the belt at a proper position.
The removal or mounting for the
belt system can only be done by
the

franchised

JAC

service

providers.
This system is designed for one-
time application only, which must
be replaced provided the squib
has been initiated.
Remember to attach all docu鄄
ments to the new owner if the ve鄄
hicle is to be transferred.
Be sure to note end-of-life vehicle
laws and concerned regulations if
your vehicle is out of service life.
You may contact our franchised
service providers for expertise.

Headrest

1 -14

OWNER爷S MANUAL

pick-up

Adjusting Height

Hold both sides of a headrest
and move it up or down.
Locate the top of headrest to
eye level or slightly higher to
achieve best protection.

Assembly and Disassembly

To remove a headrest, pull the
headrest upwards until it stops,
and then pull it out whiling
pressing the button (as shown in
the figure).
To re -assemble the headrest,
push support rods of the head鄄
rest into the guiding channel for
an

expected

engagement

sound.

The rear seat comes with two
headrests for better and safer
riding experience.

Proper seat adjustment are cru鄄
cial for:

Operate the controls accu鄄

rately and quickly.

Better support for a relaxed

and energetic body.

Maximum protection from seat

belt.

Caution:

Keep a proper distance between
the front seat and the steering
wheel or the instrument panel.
Always place your feet in the foot
well, not on the instrument panel
or the seat.

Front Seat

Headrest

1 -15

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Vanity Mirror

The optional vanity mirror is fitted
at the right side of the sun visor.

Handle

Lift up the handle to the position
as indicated and lower it down
gently. The handle can be lev鄄
eled then in addition to closing
middle utility box.
A utility box is provided in the
middle handle of the front seat.

Sun Visor

Handle

Sun Visor

Use the sun visor can shield
frontal sunlight.

1 -17

Front Seat

Caution:

No objects are allowed in the foot
well as the pedal action may be
hindered during sudden braking or
an accident. In this case you may
fail to stop your vehicle, press the
clutch pedal or step on the gas.

Caution:

Seats can only be adjusted when
the vehicle is stationary with a
view to safety!
Take care to adjust your seat! It
may result in failures or injury
due to negligence and uncon鄄
trolled operations!

Driver's Seat

It is recommend to adjust driver's
seat as follows:

Adjust your seat longitudinally

to allow easy and full pedal en鄄
gagement.

Adjust your seat angle to com鄄

pletely suit your back and allow
easy access to the uppermost
wheel point.

Passenger's Seat

It is recommend to adjust pas鄄
senger's seat as follows:

Adjust your seat back to cer鄄

tain up straight position.

No difficulty in putting your feet

in the foot well.

Locate the seat as back as

possible.

A 原 Tilting Your Seat Back

Lean against the back of seat
back and tilt it with the aid of out鄄
side seat handle.

1 -16

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Caution:

To avoid an expected vehicle
movement, the handbrake shall
be engaged reliably while park鄄
ing. Also the first gear can be
selected as necessary.
Note that fully press the hand鄄
brake to return its original rest
position while releasing hand鄄
brake. Partial release may over鄄
heat the braking system and re鄄
sult in braking degradation. This
may also lead to an early wear
for the rear brake disks.

Manual Gearbox

Do not select the reverse gear until
the vehicle comes to a full stop.
Fully press the clutch pedal when
the engine is running, wait a mo鄄
ment to avoid abnormal noises
from gear shifting. The reverse light
will illuminate when the reverse
gear is selected and the ignition
switch is turned to ON Position.
Do not rest your hand on the gear

lever while driving. In this case
your hand's load can be trans鄄
ferred to the shifting yoke and
leading to an early wear.

Caution:

Never remove your ignition key until
the vehicle has been completely
stopped. Otherwise the steering
lock may be engaged unexpectedly.
Leave your ignition key in the lock
under no circumstances during
your absence, even for a tempo鄄
rary one.
In particular, a child left alone in
the vehicle may start the engine or
other electric devices such as
power windows.

Handle Brake

1 -19

Pedal

Handle Brake

Never hinder pedals or place any
objects in foot well which may
slip under pedals.
No dust carpet or other auxiliary
coverings are allowed to be
placed under the area of pedals.
As:

It may need more braking trav鄄

el in case of a defective braking
device.

Both the clutch and accelera鄄

tion pedals are always required
to be fully pressed.

All pedals shall be allowed to

return their original positions
freely.

Caution:

No objects are allowed in the foot
well as the pedal action may be
hindered during sudden braking
or an accident. In this case you
may fail to stop your vehicle,
press the clutch pedal or step on
the gas.

Lifting up handbrake forcibly while
parking. The first gear may be se鄄
lected if parking on s steep surface.
The braking light will illuminate
when the handbrake is engaged
and the ignition switch is on.
To release the handbrake, gently
lift the lever and push the lock but鄄
ton inward (as shown in figure) and
press the handle fully to its rest po鄄
sition.

1 -18

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Do not run the engine at a high
speed or full throttle unless it
reaches the working tempera鄄
ture.
When a catalytic converter is pro鄄
vided, it is not recommended to
start your vehicle by simply drag鄄
ging it over 50m. This may dam鄄
age the catalytic converter as a
result of unburned fuel.
Use on -board batteries from
other vehicles as much as possi鄄
ble to support your vehicle's
start before dragging it.

Starting Your Engine

Petrol Engine

The engine comes with a jet that
can provide properly -ratioed
gas/fuel mixture at ambient tem鄄
perature.
Do not step on the gas either for
a cold or hot engine before or
during staring your vehicle.
Stop for 30 seconds before re -
starting the engine if you fail to
start it within 10 seconds initially.
The electric fuel pump fuse may
blow if it fails at the second at鄄
tempt.
Properly step on the gas after
starting if your engine is ex鄄
tremely hot.

Turning off Your Engine

Wait approximately 2 minutes in鄄
stead of turning off your engine im鄄
mediately following a long -time
and high-load operation.

Caution:

The radiator fan continue to run a
while (about 10 minutes) when
your engine is turned off and the
key has been turned to OFF posi鄄
tion. Sometimes the fan can be re-
energized after a pause as the
cooling fluid temperature rises due
to poor ventilation.
A hot engine, subject to direct
sunlight, may dramatically increase
temperature in the engine bay.
Watch out while working therein.

1 -21

"LOCK": this position allows the
key to be inserted or removed
from the ignition switch.
"OFF": this position turns off the
vehicle.
"ACC": this position connects the
battery for accessories.
"ON": this position turns on the
vehicle and the ignition key re鄄
mains in while the engine is run鄄

Ignition Switch

Starting Your Engine

Caution:

An engine running at idle is a se鄄
rious health hazard in confined
spaces.
Position the gear lever at neutral
and fully press the clutch pedal
(where a manual gearbox is pro鄄
vided) during the startup. In this
case, the only load for the starter
is to crank the engine.
Release your ignition key immedi鄄
ately once the engine is running
on its own.
Temporary noises may be heard
during a cold start as the oil pres鄄
sure is to be established for com鄄
pensating tappet clearance, and
this is normal and acceptable.

ning.
"START": when the key is turned
to this position, engine starts.
When the key is released, it re鄄
turns to the "ON" position auto鄄
matically.

1 -20

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Indicator

Main Beam Indicator
This indicator will illuminate
when the main beam of head鄄
lamp is enabled.

Oil Pressure Indicator
The oil pressure indicator will il鄄
luminate when the ignition switch
is turned to ON Position and the
engine is not running, which will
go off when the engine is run鄄
ning normally. It presents low oil
pressure if illuminated during
driving and an immediate exam鄄

ination shall be carried out for
the oil level in the crankcase.
Please contact immediately the
franchised JAC service provi -
ders to inspect your lubricating
system provided the oil level is
not acceptable.

1 -23

Instrument Panel

(1) Water Temperature Gauge
(2) Direction Indictor
(3) Odometer
(4) Speedometer
(5) Level Gauge
(6) Reset Button
(7) Tachometer

Fuel Level Indicator

The level indicator is normally
off and turns on when the fuel
level becomes low.

Direction Indictor

Turn on the direction indicator or
hazard warning switches, the
corresponding indicators and
lamps will illuminate at the same
time.

Indicator

1 -22

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Water Temperature Gauge

This pointer shall stay between
C and H at the time of normal
running. When the pointer
reaches or goes beyond the
mark H (Red Line), the vehicle
shall be stopped immediately to
examine the level of the spare

Indicator

Charging Indicator (*)

The charging indicator will illu鄄
minate when the ignition switch
is turned to ON Position and go
off if the engine is running. The
indicator will stay on in case of
the faulty charging circuit.

Handbrake Indicator

This indicator will illuminate
when the handbrake has been
lifted up and the ignition switch
is position ON.

1 -25

Indicator

Engine Fault Indicator (*)

It is recommended to slowly drive
your vehicle to the nearest fran鄄
chised JAC service providers for
examining the engine's electric
circuit, oil circuit and intake mani鄄
fold if this indicator illuminates.

Seat Belt Indicator

This indicator will illuminate
when you fail to properly wear
your seat belt. It is recommend鄄
ed to wear it before each driving

Pre-heating Indicator

This indicator illuminates before
start and goes off while running
normally for a diesel engine.

1 -24

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Fog Lamp Switch

The fog lamp switch can only be

enabled when the side lamps are

turned on. Rotating the switch again

can turn off these fog lamps. When

the side lamps are turned off, the

fog lamps will also go off (it is nor鄄

mal practice). Note: observe whet-

her rear fog lamps are switched on

during your absence. Do not turn on

fog lamps in clear days so as not to

interfere other drivers.

Switch

Windshield Wiper and Water
Jet Switch

Complete wiper blades can ensure
good visibility. The front wipers
and water washing device can
only work until the ignition switch is
turned to ON position. In case of
frost, the blades shall be examined
for possible freezing before oper鄄
ating the wipers initially.

Hazard Warning Switch

All direction lamps will flash when
this button is pressed regardless
of the direction indicator switch.
Press the button again to turn off
direction lamps. This button can
only be applied in case of acci鄄
dents.

1 -27

radiator reservoir and possible
leakages from joints between
spare reservoir and pipes.
Should nothing abnormal be i鄄
dentified, wait and contact the
nearest franchised JAC service
provider when the temperature
returns to acceptable range.

Indicator

Fuel Gauge

The pointer will indicate the tank
level when the ignition switch is
turned to ON Position, where "F"
means Full and "E" stands for
Empty.

Stalk Lamp Switch

To turn on outline marker lamps, tail
lamps, license lamp and instrument
cluster illumination lamps, rotate
this stalk switch anti-clockwise.
To turn on headlamps and other
lamps mentioned above, rotate
this stalk switch anti -clockwise
to its end.

Switch

1 -26

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Air Conditioner

AC/Defrost Control Panel

Heater, defrosting and air condi鄄
tioning.

Vent Selector Switch

This switch is designed to regu鄄
late air flow from heater, de鄄
froster and air conditioner.
淤 Horizontal Vent
于 Horizontal and Bottom Vent
盂 Bottom Vent
榆 Bottom and Defrost Vent
虞 Defrost

Vent Selector Switch

When the switch is positioned at
Horizontal Vent:
The air flow will be regulated
before being discharged from
upper vents which is used for
full occupants.

1 -29

Turn-Signal and Lever Switch

Turn Signal

Move the lever switch to the de鄄
sired direction and both the di鄄
rection indicator and lamps will
flash. When the steering wheel
returns to its original position, the
lever switch will return to its neu鄄
tral position.

Lever Switch

Repeat to operate the lever
switch to give an overtaking sig鄄
nal. In this case the headlamps
can flash in daylight and changes
between dipped and main beams
at night.

Ventilation

The central vent is provided at
the center of the instrument panel
and side vents are provided at
both ends of the same. The air
flow can be regulated by moving
hand wheels located up, down,
left and right.

Air Conditioner

1 -28

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Air Conditioner

Vent Selector Switch

It will regulate and blow air out
from front defrost vents only and
a little amount of air comes out
from side defrosting vents,
which applies to serious cases
troubled by fog and frost.

Air Intake Selection Lever

You can move the intake selec鄄
tion lever to the right or left posi鄄
tion in controlling the intake air:
The quality of recirculated air
may be affected adversely for
long -time operation. Fresh air
must be introduced to improve
air quality.

Cold/Hot Air Rotary Switch

This switch is provided to control
the discharged air temperature.
When the switch is positioned on
COLD, it produces cool recircu鄄
lated air, whereas, hot air is
available when the switch is
turned to Hot position.

1 -31

Air Conditioner

Vent Selector Switch

When the switch is positioned at
Bottom Vent:
Air will be discharged from bot鄄
tom vents.

Vent Selector Switch

When the switch is positioned at
Horizontal and Bottom Vent:
Air can be discharged from both
up and bottom vents.

Vent Selector Switch

When the switch is positioned at
Bottom and Defrost Vent:
Air flow can be discharged from
bottom vents and a little amount
of air will be blown out from front
and side defrosting vents.

1 -30

OWNER爷S MANUAL

pick-up

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Рассказать друзьям

Страницы