Engines Iveco C10,C13, Cursor 10, Cursor 13. Instruction - page 72
SECTION 5 - TOOLS
7
F3B CURSOR ENGINES
TOOLS
TOOL NO.
DESCRIPTION
99360500
Tool to lift crankshaft
99360553
Tool for assembling and installing rocker arm shaft
99360585
Swing hoist for engine disassembly assembly
99360605
Belt to insert piston in cylinder liner (60 - 125 mm)
99360612
Tool for positioning engine P.M.S.
99360613
Tool for timing of phonic wheel on timing gear
8
SECTION 5 - TOOLS
F3B CURSOR ENGINES
Base - May 2007
TOOL NO.
DESCRIPTION
99360703
Tool to stop cylinder liners
99360706
Tool to extract cylinder liners (to be used with specific rings)
99360728
Ring (135 mm) (to be used with 99360706)
99361036
Brackets fixing the engine to rotary stand 99322230
99365056
Tool for injector holder heading
99370415
Base supporting the dial gauge for checking cylinder liner
protrusion (to be used with 99395603)
SECTION 5 - TOOLS
9
F3B CURSOR ENGINES
TOOLS
TOOL NO.
DESCRIPTION
99389834
Torque screwdriver (1-6 Nm) for calibrating the injector solenoid
valve connector check nut
99390330
Valve guide sleeker
99390772
Tool for removing injector holding case deposits
99390804
Tool for threading injector holding cases to be extracted
(to be used with 99390805)
99390805
Guide bush (to be used with 99390804)
99394015
Guide bush (to be used with 99394041 or 99394043)
10
SECTION 5 - TOOLS
F3B CURSOR ENGINES
Base - May 2007
TOOL NO.
DESCRIPTION
99394041
Cutter to rectify injector holder housing
(to be used with 99394015)
99394043
Reamer to rectify injector holder lower side
(to be used with 99394015)
99395216
Measuring pair for angular tightening with 1/2”
and 3/4” square couplings
99395219
Gauge for defining the distance between the centres
of camshaft and transmission gear
99395603
Dial gauge (0 - 5 mm)
99396035
Centering ring of crankshaft front gasket cap