Hummer H2. Instruction - page 95

Slip yoke broken

A

Require replacement.

Splines worn, affecting performance

A

Require replacement.

Splines worn close to the end of their
useful life

1

Suggest replacement.

Threads damaged

A

Require repair or replacement.

Threads stripped (threads missing)

A

Require replacement.

U-bolt damaged, affecting performance

A

Require replacement of U-bolts.

Yoke damaged, affecting performance

A

Require repair or replacement.

1998 Chevrolet Pickup C1500

Uniform Inspection and Communication Standards DRIVE TRAIN AND TRANSMISSION

Uniform Inspection and Communication Standards

ELECTRICAL SYSTEMS

OVERVIEW

The Motorist Assurance Program is the consumer outreach effort of the Automotive Maintenance and Repair
Association, Inc. (AMRA). Participation in the Motorist Assurance Program is drawn from retailers, suppliers,
independent repair facilities, vehicle manufacturers and industry associations.

Our organization's mission is to strengthen the relationship between the consumer and the auto repair industry.
We produce materials that give motorists the information and encouragement to take greater responsibility for
their vehicles through proper, manufacturer-recommended, maintenance. We encourage participating service
and repair shops (including franchisees and dealers) to adopt (1) a Pledge of Assurance to their Customers and
(2) the Motorist Assurance Program Standards of Service. All participating service providers have agreed to
subscribe to this Pledge and to adhere to the promulgated Standards of Service demonstrating to their customers
that they are serious about customer satisfaction.

These Standards of Service require that an inspection of the vehicle's (problem) system be made and the results
communicated to the customer according to industry standards. Given that the industry did not have such
standards, the Motorist Assurance Program successfully promulgated industry inspection communication
standards in 1994-95 for the following systems: Exhaust, Brakes, ABS, Steering and Suspension, Engine
Maintenance and Performance, HVAC, Electrical Systems, and Drive Train and Transmissions. Further,
revisions to all of these inspection communication standards are continually re-published. Participating shops
utilize these Uniform Inspection & Communication Standards as part of the inspection process and for
communicating their findings to their customers.

The Motorist Assurance Program continues to work cooperatively and proactively with government agencies
and consumer groups toward solutions that both benefit the customer and are mutually acceptable to both
regulators and industry. We maintain the belief that industry must retain control over how we conduct our
business, and we must be viewed as part of the solution and not part of the problem. Meetings with state and
other government officials (and their representatives), concerned with auto repair and/or consumer protection,
are conducted. Feedback from these sessions is brought back to the association, and the program adjusted as
needed.

To assure auto repair customers recourse if they were not satisfied with a repair transaction, the Motorist
Assurance Program offers mediation and arbitration through the Better Business Bureau and other non-profit
organizations. MAP conducted pilot programs in twelve states before announcing the program nationally in
October 1998. During the pilots, participating repair shops demonstrated their adherence to the Pledge and
Standards and agreed to follow the UICS in communicating the results of their inspection to their customers.

To put some "teeth" in the program, an accreditation requirement for shops was initiated. The requirements are
stringent, and a self-policing method has been incorporated which includes the "mystery shopping" of outlets.

We welcome you to join us as we continue our outreach with your support, both the automotive repair industry
and your customers will reap the benefits. Please visit MAP at our Internet site www.motorist.org or contact us
at:

1998 Chevrolet Pickup C1500

Uniform Inspection and Communication Standards ELECTRICAL SYSTEMS

1998 Chevrolet Pickup C1500

Uniform Inspection and Communication Standards ELECTRICAL SYSTEMS

7101 Wisconsin Avenue

Bethesda, MD 20814

Phone (301) 634-4955 - Fax (202) 318-0378

January 2002

Map@motorist.org

OVERVIEW OF SERVICE REQUIREMENTS AND SUGGESTIONS

It is MAP policy that all exhaust, brake, steering, suspension, wheel alignment, drive-line, engine performance
and maintenance, and heating, ventilation and air conditioning, and electrical services be offered and performed
under the standards and procedures specified in these sections.

Before any service is performed on a vehicle, an inspection of the appropriate system must be performed. The
results of this inspection must be explained to the customer and documented on an inspection form. The
condition of the vehicle and its components will indicate what services/part replacements may be "Required" or
"Suggested". In addition, suggestions may be made to satisfy the requests expressed by the customer.

When a component is suggested or required to be repaired or replaced, the decision to repair or replace must be
made in the customer's best interest, and at his or her choice given the options available.

This section lists the various parts and conditions that indicate a required or suggested service or part
replacement. Although this list is extensive, it is not fully inclusive. In addition to this list, a technician may
make a suggestion. However, any suggestions must be based on substantial and informed experience, or the
vehicle manufacturer's recommended service interval and must be documented.

Some conditions indicate that service or part replacement is required because the part in question is no longer
providing the function for which it is intended, does not meet a vehicle manufacturer's design specification or is
missing.

Example: An exhaust pipe has corroded severely and has a hole in it through which exhaust gases are leaking.
Replacement of the exhaust pipe in this case is required due to functional failure.

Example: A brake rotor has been worn to the point where it measures less than the vehicle manufacturer's
discard specifications. Replacement of the rotor is required because it does not meet design specifications.

Some conditions indicate that a service or part replacement is suggested because the part is close to the end of
its useful life or addresses a customer's need, convenience or request. If a customer's vehicle has one of these
conditions, the procedure may be only to suggest service.

Example: An exhaust pipe is rusted, corroded or weak, but no leaks are present. In this case, the exhaust pipe
has not failed. However, there is evidence that the pipe may need replacement in the near future. Replacement
of the pipe may be suggested for the customer's convenience in avoiding a future problem.

1998 Chevrolet Pickup C1500

Uniform Inspection and Communication Standards ELECTRICAL SYSTEMS

Example: The customer desires improved ride and/or handling, but the vehicle's shocks or struts have not failed.
In this case, replacement may be suggested to satisfy the customer's wishes. In this case, replacement of the
shocks or struts may not be sold as a requirement.

A customer, of course, has the choice of whether or not a shop will service his or her vehicle. He or she may
decide not to follow some of your suggestions. When a repair is required , a MAP shop must refuse partial
service on that system if, in the judgment of the service provider, proceeding with the work could create or
continue an unsafe condition. When a procedure states that required or suggested repair or replacement is
recommended, the customer must be informed of the generally acceptable repair/replacement options whether
or not performed by the shop.

When presenting suggested repairs to the customer, you must present the facts, allowing the customer to draw
their own conclusions and make an informed decision about how to proceed.

The following reasons may be used for required and suggested services. These codes are shown in the "Code"
column of the MAP Uniform Inspection & Communications Standards that follow:

Reasons to Require Repair or Replacement

A - Part no longer performs intended purpose

B - Part does not meet a design specification (regardless of performance)

C - Part is missing

Reasons to Suggest Repair or Replacement

1 - Part is close to the end of its useful life (just above discard specifications, or weak; failure likely to
occur soon, etc.)

2 - To address a customer need, convenience, or request (to stiffen ride, enhance performance, eliminate
noise, etc.)

3 - To comply with maintenance recommended by the vehicle's Original Equipment Manufacturer (OEM)

4 - Technician's recommendation based on substantial and informed experience

SERVICE PROCEDURES REQUIRED AND SUGGESTED FOR PROPER
VEHICLE OPERATION

NOTE:

When a repair is required , the shop must refuse partial service to the system in
question, if the repair creates or continues an unsafe condition.

NOTE:

Suggested services are always optional. When presenting suggested repairs to
the customer, you must present the facts, allowing the customer to draw their
own conclusions and make an informed decision about how to proceed.

NOTE:

When working on electrical systems, if a potentially hazardous condition is
observed, require repair or replacement of affected components prior to

1998 Chevrolet Pickup C1500

Uniform Inspection and Communication Standards ELECTRICAL SYSTEMS

Рассказать друзьям