Honda Accord Coupe L4 (2011 year). Instruction - part 16

The VOL button adjusts the volume
up (

) or down (

). Press the top

or bottom of the button, hold it until
the desired volume is reached, then
release it.

Three controls for the audio system
are mounted in the steering wheel
hub. These let you control basic
functions without removing your
hand from the wheel.

The MODE button changes the
mode. Pressing the button
repeatedly selects FM1, FM2, AM,
disc (if a disc(s) is loaded) or AUX
(if an appropriate audio unit is
connected). On models with XM
Radio, you can also select XM1 and
XM2.

If you are listening to the radio, use
the CH button to change stations.
Each time you press the top (

) of

the button, the system goes to the
next preset station on the band you
are listening to. Press the bottom
(

) to go back to the previous

preset station. If you press and hold
the CH button (

) or (

), the

system goes into the skip (seek)
mode. It stops when it finds a station
with a strong signal.

If an iPod or a USB flash memory
device is plugged into the system,
you can also select AUX.

CONTINUED

Remote Audio Controls

Fe
a

tu

re

s

237

MODE BUTTON

VOL BUTTON

CH BUTTON

Main Menu

If you are playing a conventional CD
(without the text data and not
compressed in MP3 or WMA), you
can use the skip function to select
discs. Press and hold the top (

) of

the CH button until you hear a beep,
to skip forward to the next disc.
Press and hold the bottom (

) to

skip backward to the previous disc.

If you are playing a disc, iPod or USB
flash memory device, the system
skips to the beginning of the next
track/file each time you press the
top (

) of the CH button. Press the

bottom (

) to return to the

beginning of the current track/file.
Press it twice to return to the
previous track/file.

If you are playing a USB flash
memory device or iPod with the USB
adapter cable, press and release the
top (

) of the CH button to skip

forward to the beginning of the next
file. Press the bottom (

) to skip

backward to the beginning to the
current file. Press it twice to return
to the previous file.

When playing a USB flash memory
device, you can also use the seek
function to skip the folder. To
activate this, press and hold either
side of the CH button until you hear
a beep.

You can also use the skip function to
select folders. Press and hold the top
(

) of the CH button until you hear

a beep, to skip forward to the first
file in the next folder. Press the
bottom (

) to skip backward to the

previous folder.

Remote Audio Controls

238

Main Menu

The auxiliary input jack is inside the
console compartment. The system
will accept auxiliary input from
standard audio accessories using a
1/8 inch (3.5 mm) stereo miniplug.

When you plug in a mini-jack cable
between a compatible audio unit and
the jack, you will see AUX in the
display and the system automatically
switches to AUX mode.

When a compatible audio unit is
connected to the jack, press the AUX
or CD/AUX button to select it.

Auxiliary Input Jack

Fe
a

tu

re

s

239

Main Menu

The system will retain your AM and
FM presets even if power is
disconnected.

Your vehicle’s audio system may
disable itself if it is disconnected
from electrical power for any reason.
To make it work again, you must
enter a specific five-digit code with
the preset buttons. Because there
are hundreds of number
combinations possible from the five
digits, making the system work
without knowing the exact code is
nearly impossible.

You should have received a radio
code card that lists your audio
system’s code and serial numbers. It
is best to store this card in a safe
place at home. In addition, you
should write the audio system’s
serial number in this owner’s manual.

If you lose the card, you must obtain
the code number from your dealer.
To do this, you will need the audio
system’s serial number.

If your vehicle’s battery is discon-
nected or goes dead, the audio
system will disable itself. If this
happens, you will see
‘‘ENTER CODE’’ in the frequency
display (on the screen on models
with navigation system) the next
time you turn on the system. Use the
preset buttons to enter the five-digit
code. The code is on the radio code
card included in your owner’s
manual kit. When it is entered
correctly, the radio will start playing.

If you make a mistake entering the
code, do not start over; complete the
five-digit sequence, then enter the
correct code. You have ten tries to
enter the correct code. If you are
unsuccessful in ten attempts, you
must then leave the system on for 1
hour before trying again.

Radio Theft Protection

240

Main Menu

To set the time, press the CLOCK
button until you hear a beep. The
displayed time begins to blink.

Change the hours by pressing the H
(hour) button until the numbers
advance to the desired time. Change
the minutes by pressing the M
(minute) button until the numbers
advance to the desired time.

Press the CLOCK button again to
enter the set time.

You can quickly set the time to the
nearest hour. If the displayed time is
before the half hour, press and hold
the CLOCK button, then press the R
(reset) button to set the time back to
the previous hour. If the displayed
time is after the half hour, the same
procedure sets the time forward to
the beginning of the next hour.

The navigation system receives
signals from the global positioning
system (GPS), and the displayed
time is updated automatically by the
GPS. Refer to the navigation system
manual for how to adjust the time.

1:06 would RESET to 1:00.
1:52 would RESET to 2:00.

For example:

On models with navigation system

On models without navigation system

CONTINUED

Setting the Clock

Fe
a

tu

re

s

241

On models without navigation system

MINUTE BUTTON
(PRESET 5)

CLOCK BUTTON

RESET BUTTON
(PRESET 6)

HOUR BUTTON
(PRESET 4)

U.S. EX-L is shown.

Main Menu

Turn the selector knob to select
‘‘CLOCK ADJUST.’’

Press the selector knob (ENTER)
to enter your selection. The
display changes to the clock
adjusting display.

Turn the selector knob to select
the item which you want to adjust.
Turning the selector knob will
change the selected item between
the clock display setting, hours,
minutes, and SET. The selected
item is indicated with

in the

display.

You can also adjust the clock and
switch the clock display between
24-hours and 12-hours in the menu
mode.

To adjust the clock setting:

Press and release the MENU
button. The display shows you the
menu items.

You can adjust the clock setting
with the ignition switch in the
ACCESSORY (I) or ON (II)
position.

1.

2.

3.

4.

On models without navigation system

Setting the Clock

Adjusting the Clock with MENU
Button

242

Main Menu

Press the selector knob (ENTER)
to enter your selection. The
display will return to the clock
adjusting display.

Turn the selector knob to change
the setting between 12H and 24H.

To set the time, turn the selector
knob and select the hours or the
minutes, then press the knob to
enter your selection. The display
changes to the setting display.

Turn the selector knob to count
the numbers up or down.

Press the selector knob (ENTER)
to enter your selection. The
display will return to the clock
adjusting display.

While setting the clock, pressing
the RETURN button will go back
to the previous display.
Pressing the MENU button again
will cancel this setting mode.

To enter the clock setting, turn
the selector knob to select ‘‘SET,’’
then press the knob. The display
will return to the menu item
display.

Press either the RETURN or
MENU button to go back to the
normal display.

5.

6.

7.

8.

9.

10.

11.

Setting the Clock

Fe
a

tu

re

s

243

MINUTE SETTING

Main Menu

With the system set, you can still
open the trunk with the remote
transmitter without triggering the
alarm. The alarm will sound if the
trunk lock is forced, or the trunk is
opened with the trunk release lever
or the emergency trunk opener.

Once the security system is set,
opening either door without using
the key or the remote transmitter,
the hood, or the trunk will cause the
alarm to activate. It will also activate
if the audio unit is removed from the
dashboard or the wiring is cut.

The security system will not set if
the hood, trunk, or either door is not
fully closed. If the system will not set,
turn the ignition switch to the ON
(II) position, and check the
indicators on the instrument panel.
Close either door or the trunk
indicated on the display. Check the
hood visually since it is not part of
the display, and shut it if necessary.

The security system helps to protect
your vehicle and valuables from theft.
The horn sounds and a combination
of headlights, parking lights, side
marker lights and taillights flashes if
someone attempts to break into your
vehicle or remove the audio unit.
This alarm continues for two
minutes, then the system resets. To
reset an activated system before the
two minutes have elapsed, unlock
the driver’s door with the key or the
remote transmitter.

The security system automatically
sets 15 seconds after you lock the
doors, hood, and trunk. For the
system to activate, you must lock the
doors from the outside with the key,
driver’s lock tab, door lock master
switch, or remote transmitter. The
security system indicator on the
instrument panel starts blinking
immediately to show you the system
is setting itself.

Security System

244

SECURITY SYSTEM INDICATOR

Main Menu

Do not attempt to alter this system
or add other devices to it.

Use the remote transmitter

to quickly check that the hood, the
trunk, and both doors are closed.
Push the lock button twice within 5
seconds. There should be an audible
confirmation beep.

Security System

Fe
a

tu

re

s

245

NOTE:

Main Menu

Compass operation can be affected
by driving near power lines or
stations, across bridges, through
tunnels, over railroad crossings, past
large vehicles, or driving near large
objects that can cause a magnetic
disturbance. It can also be affected
by accessories such as antennas and
roof racks that are mounted by
magnets.

The compass may need to be
manually calibrated after exposure to
a strong magnetic field. If the
compass seems to be continually
showing the wrong direction and is
not self-calibrating, or the compass
display is blinking with the CAL
indicator on, do the following
procedure.

When you turn the ignition switch to
the ON (II) position, the compass is
self-calibrating, then the compass
display is shown in the display.

Press and hold the MENU button
for about 5 seconds until you hear
a beep. The display shows you the
compass setting menu items.

Turn the ignition switch to the ON
(II) position.

Do this procedure in an open

area, away from buildings, power
lines, and other vehicles.

1.

2.

EX-L and all V6 without navigation
system

Compass Operation

Compass Calibration

Compass

246

NOTE:

COMPASS

COMPASS SETTING MENU ITEMS

U.S. model is shown.

Main Menu

Turn the selector knob to select
‘‘CALIBRATION.’’

Press the selector knob (ENTER)
to enter your selection. The
display shows you ‘‘PUSH CAL
START.’’

The audio system is not related to
the compass system. Even if the
compass system is calibrating, the
display returns to the normal display
which you last selected.

When the calibration is successfully
completed, the CAL indicator goes
off and the compass display will stop
blinking and show an actual heading.

Drive the vehicle slowly in two
complete circles.

Press the selector knob (ENTER).
The compass display is blinking
and the CAL indicator is shown.

While setting the compass,
pressing the RETURN button will
go back to the previous display.
Pressing the MENU button will
cancel the compass setting mode.

5.

6.

4.

3.

Compass

Fe
a

tu

re

s

247

Main Menu

In most areas, there is a variation
between magnetic north and true
north. Zone selection is required so
the compass can compensate for this
variation. To check and select the
zone, do this:

Once the correct zone is displayed,
press the selector knob. The
display then returns to normal.

Turn the ignition switch to the ON
(II) position.

Press and hold the MENU button
for about 5 seconds until you hear
a beep. The display shows you the
compass setting menu items.

Turn the selector knob to select
‘‘ZONE.’’ Press the selector knob
(ENTER) to enter your selection.
The display shows you the
currently selected zone number.

Find the zone for your area on the
map (see page

). If the correct

zone is not shown, turn the
selector knob to cycle the zone
lists up or down.

If necessary, press the RETURN
button to return to the previous
display. Pressing the MENU
button will cancel the compass
setting mode.

4.

5.

1.

2.

3.

249

Compass Zone Selection

Compass

248

ZONE NUMBER

Main Menu

The audio system is not related to
the compass system. Even if the
compass system is in the zone
setting mode, the display returns to
the normal display which you last
selected.

Compass

Fe
a

tu

re

s

249

Zone Map

Main Menu

Cruise control allows you to maintain
a set speed above 25 mph (40 km/h)
without keeping your foot on the
accelerator pedal. It should be used
for cruising on straight, open
highways. It is not recommended for
city driving, winding roads, slippery
roads, heavy rain, or bad weather.

Press and release the SET/
DECEL button on the steering
wheel. The CRUISE CONTROL
indicator on the instrument panel
comes on to show the system is
now activated.

Push the CRUISE button on the
steering wheel. The CRUISE
MAIN indicator on the instrument
panel comes on.

Accelerate to the desired cruising
speed above 25 mph (40 km/h).

The cruise control system can be
left on, even when it is not in use.

1.

2.

3.

Using Cruise Control

Cruise Control

250

SET/DECEL
BUTTON

CRUISE BUTTON

RES/ACCEL
BUTTON

CANCEL BUTTON

Improper use of the cruise
control can lead to a crash.

Use the cruise control only
when traveling on open
highways in good weather.

Main Menu

You can decrease the set cruising
speed in any of these ways:

If you need to decrease your

speed quickly, use the brakes as you
normally would.

Press and hold the SET/DECEL
button. Release the button when
you reach the desired speed.

To slow down in very small
amounts, tap the SET/DECEL
button repeatedly. Each time you
do this, your vehicle will slow
down about 1 mph (1.6 km/h).

Tap the brake or clutch pedal
lightly with your foot. The
CRUISE CONTROL indicator on
the instrument panel will go out.
When the vehicle slows to the
desired speed, press the SET/
DECEL button.

You can increase the set cruising
speed in any of these ways:

Press and hold the RES/ACCEL
button. When you reach the
desired cruising speed, release the
button.

Push on the accelerator pedal.
Accelerate to the desired cruising
speed, then press the SET/
DECEL button.

To increase the speed in very
small amounts, tap the RES/
ACCEL button. Each time you do
this, your vehicle will speed up
about 1 mph (1.6 km/h).

Cruise control may not hold the set
speed when you are going up and
down hills. If your vehicle speed
increases going down a hill, use the
brakes to slow down. This will cancel
the cruise control. To resume the set
speed, press the RES/ACCEL button.
The CRUISE CONTROL indicator
on the instrument panel will come
back on.

CONTINUED

Changing the Set Speed

Cruise Control

Fe
a

tu

re

s

251

NOTE:

Main Menu

Pressing the CRUISE button turns
the system completely off and erases
the previous cruising speed.

When you push the CANCEL button,
or tap the brake or clutch pedal, the
system will remember the previously
set cruising speed. To return to that
speed, accelerate to above 25 mph
(40 km/h), and then press and
release the RES/ACCEL button. The
CRUISE CONTROL indicator comes
on. The vehicle will accelerate to the
same cruising speed as before.

You can cancel cruise control in any
of these ways:

Tap the brake or clutch pedal.

Push the CANCEL button on the
steering wheel.

Push the CRUISE button on the
steering wheel.

Even with the cruise control turned
on, you can still use the accelerator
pedal to speed up for passing. After
completing the pass, take your foot
off the accelerator pedal. The vehicle
will return to the set cruising speed.

Resting your foot on the brake or
clutch pedal causes the cruise
control to cancel.

Resuming the Set Speed

Canceling Cruise Control

Cruise Control

252

Main Menu

Рассказать друзьям

Страницы