Geely FC. Manual part - 96
Geely FC. Manual part - 96
Rear bumper
Subassembly
Exterior/inner trim board--Rear bumper
Equipping with
reversing radar:
reversing radar
probe head
Equipping with
reversing radar:
reversing radar
probe head
Equipping with radar:
fixing pedestal of radar
probe head
Left decoration of
luggage cas
Right decoration of trunk
Rear trim board of
trunk
Trim board of right
rear wheel
Mudguard of left
rear wheel
Rear bumper
Mudguard of right
rear wheel
Trim board of left
rear wheel
381
Change
Hint:
z
When assembling, please work by the sequence which is opposite with disassembling
sequence; if necessary, it will have assembling instruction.
z
Please refer to subassembly figure of rear bumper on page 381.
Exterior/inner trim board--Rear bumper
382
1. Disassemble trunk carpet assembly [68000114]
2. Disassemble rear trim board of trunk [68000118]
(a) Use two fixing clasps.
(b) Use disassembling tool for trim tape to disassemble rear
trim board of trunk.
3. Disassemble left decoration of trunk [68000112]
(a) Use disassembling tool for fixing clamp to disassemble
fixing clamp and a part of left decoration of trunk.
Hint:
Disassemble the fixing clasp and left decoration of trunk in the scope of screw cap used for
fixing rear bumper and trunk which could be disassembled.
4. Disassemble right decoration of trunk [68000113]
5. Disassemble mudguard of left rear wheel [68000223]
(a) Disassemble two screws and mudguard of left rear wheel.
6. Disassemble mudguard of right rear wheel [68000224]
7. Disassemble trim board of left rear wheel [68000230]
(a) Use screw driver to disassemble fixing clasp from rear bumper.
(b) Use disassembling tool for fixing clasp to disassemble fix-
ing clasp.
(c) Disassemble trim board of left rear wheel.
Hint: Disassemble trim board of left rear wheel in the
scope of screw used for fixing rear bumper which could
be disassembled.
8. Disassemble trim board of right rear wheel [68000231]
9. Disassemble rear bumper [68000012]
(a) Use screw driver to disassemble two fixing clasps.
(b) Disassemble four screw caps and two screws.
(c) Disassemble fixing clasp and rear bumper.
(d) Equipping with radar probe head: disassemble four joints of
radar probe head.
10. Disassemble reversing radar probe head assembly.
(a) Disassemble fixing pedestal of radar probe and radar probe.
11. Disassemble left rear fog light assembly [67000100]
(a) Disassemble fixing nut and left rear fog light assembly.
12. Disassemble right rear fog light assembly [67000101]
Exterior/inner trim board--Rear bumper
Nameplate
Change
1. No.2 nameplate of trunk cover
2. No.3 nameplate of trunk cover
3. No.6 nameplate of trunk cover
4. Nameplate of front wing board
1
2
3
C h i n a -
Geely
383
Exterior/inner trim board--Exterior seal tape of left front door glass
Exterior seal tape of left front door glass (LH)
Change
Hint:
z
When assembling, please work by the sequence which is opposite with disassembling
sequence; if necessary, it will have assembling instruction.
z
Changing procedure for right side is same as left side.
protective
adhesive tape
384
1. Disassemble exterior seal tape of left front door
glass [68000158]
(a) Affix protective adhesive tape to the lower part of exterior
seal tape of left front door glass.
(b) Use disassembling tool or scraper for trim tape to disas-
semble exterior seal tape of left front door glass.
Hint: before using scraper, the needled top of scraper
should be twisted with adhesive tape.