Geely FC. Manual part - 93

Geely FC. Manual part - 93

Engine cover/automobile door--Front automobile door

Overhaul

Hint:

z

When assembling, please work by the sequence which is opposite with disassembling

sequence; but when it has items that need to pay special attention, it will add special

specification.

z

Overhaul procedure for right side is same as the left side.

z

Please refer to subassembly figure of front door on page 360.

1. Disassemble left front door control panel assembly [68000142]

(a) Disassemble the screw.

(b) Use screw driver to disassemble left front door control panel assembly.

Hint: before using screw driver, it is necessary to wrap its needled top with adhesive tape.

(c) Disassemble the joint.

2. Disassemble left front door inner defending board assembly [68010049]

(a) Disassemble the screw.

(b) Without equipping with door control light: use screw driver to disassemble door inner defending board

assembly.

(c) Equipping with door control light: use screw driver to disassemble door inner defending board assembly,

then disassemble the joint again.

(d) Equipping with door control light: use screw driver to disassemble door control light.

3. Disassemble left door inner handle assembly [68010051]

(a) Disassemble inner handle, and disassemble two pull cables from inner handle.

4. Disassemble repairing hole cover of left front door

5. Disassemble left front small loudhail cover assembly [67000131]

369

6. Disassemble left exterior electric rearview mirror

assembly [67000155]

(a) Disassemble the joint.

(b) Disassemble three screw caps and left exterior electric

rearview mirror.

7. Disassemble exterior seal tape of left front door glass

[68000158]

Engine cover/automobile door--Front automobile door

8. Disassemble left front glass assembly [68000146]

Hint: insert the cloth in door steel board to prevent it from

scratching the glass.

(a) Turn the door glass until the bolts happens in repairing

hole.

(b) Disassemble two bolts and door glass.

Note: do not damage the door glass.

Hint: pull the door glass upwards to disassemble it.

9. Disassemble seal tape of left front glass guide slot

[68000161]

10. Disassemble left front door glass lift assembly

[67000122]

(a) Disassemble the joint.

(b) Disassemble six bolts and glass lift.

11. Spread lubricating grease on automobile body.

12. Disassemble left front door window glass guide

slot assembly [68000148]

Disassemble the screw and door framework rear lower bracket.

13. Disassemble left front door locker organization as-

sembly [68000152]

(a) Disassemble the joint.

(b) Disassemble connecting rod from exterior handle.

(c) Disassemble the bolt and screw.

(d) Use planetary socket wrench (T30) to disassemble three

planetary screws and door locker.

(e) Disassemble two screws and left front door locker organi-

zation driver.

14. Spread lubricating grease on automobile body.

Spread MP lubricating grease on sliding and turning parts of

lift assembly.

15. Disassemble left front door exterior handle pedestal.

(a) Use planetary socket wrench to disassemble the screw

and door key tank.

(b) Disassemble exterior handle from exterior handle pedestal.

(c) Use planetary socket wrench to disassemble the screw

and left front door exterior handle pedestal.

370

16. Assemble left front door locker organization assembly [68000152]

(a) Use two screws to assemble left front door locker organization driver.

(b) Use planetary socket wrench (T30) to assemble three planetary screws and front door locker assembly.

Torque: 5.0 N

⋅⋅⋅⋅⋅m

(c) Assemble the bolts and screws.

(d) Connect connecting rod to exterior handle.

(e) Connect the joint.

Engine cover/automobile door--Front automobile door

17. Assemble left front door glass lift assembly [67000122]

(a) Use six bolts to assemble left front door glass lift.

Torque: 8.0 N

⋅⋅⋅⋅⋅m

(b) Assemble electric window lift and door glass.

(c) Connect electric window switch to wiring harness and turn ignition switch to ON.

(d) Operate UP and DOWN several times by hand repeatedly.

(e) Check whether the AUTO UP

→AUTO DOWN of automatic operation is normal.

Hint:

z

When it is set up again, anti-clamping protection function does not work.

z

After implementing AUTO UP operation to close window completely, if automobile window

could not be operated downwards, it is necessary to set up the lift again.

(f) Check the function of electric window.

371

18. Check the function of electric window

19. Assemble repairing hole cover of left front door

Hint:

z

When assembling repairing hole cover, pull out con-

necting rod and joint from repairing hole cover.

z

After assembling repairing hole cover, connecting rod

and joint could not be bent or concaved.

z

After assembling repairing hole cover, it is necessary

to confirm the affixing situation of adhesive tape.

Engine cover/automobile door--Front automobile door

Adjustment

Hint: the working procedure for right side is same as left side.

1. Check the clearance of left front door

(a) Check whether following data is in standard value.

2. Adjust the clearance of left front door.

(a) Use special tool to loosen hinge bolt at the side of automo-

bile body to adjust the door.

Torque: 26 N

⋅⋅⋅⋅⋅m

(b) Loosen hinge bolt at the side of automobile body to adjust

the door.

Torque: 26 N

⋅⋅⋅⋅⋅m

(c) Loosen lightly fixing screw of locking pedestal and use plas-

tic hammer to knock lightly locking pedestal to adjust its

position.

(d) Lock fixing screw of locking pedestal again.

Torque: 23 N

⋅⋅⋅⋅⋅m

At the side of

automobile body

At the side of

automobile door

372

At the side of

automobile door

At the side of

automobile body

Рассказать друзьям