Freightliner Century Class. Instruction - page 4
you find detailed instructions in this manual on the
maintenance operations to be performed. Perform all
M1 maintenance interval operations at the M2 main-
tenance interval.
Maintenance
Operation Number
Check
Perform All M1 Operations
Engine Noise Panel Inspection (noise emission control)
Engine Drive Belt Inspection
Engine-Support Fasteners Check (noise emission control)
Air Cleaner Element Inspection and Replacement
Alternator, Battery, and Starter Check
Pressure Relief Cap Check
Clutch Release Cross-Shaft Lubrication
Sleeve Assembly Bronze Bushing Lubrication
Meritor Clutch Release Bearing Lubrication
Allison Transmission Fluid and Filter Change
Manual Transmission Air Filter/Regulator Check, Cleaning, or Replacement
Transmission Fluid Level Inspection
Suspension Inspection
Suspension U-Bolt Torque Check
Knuckle Pin Lubrication, Meritor Axles
Tie Rod Inspection
Tie Rod Lubrication, Meritor Axles
Basic Inspection, Meritor Unitized Wheel Ends
*
End-Play Check, Meritor Unitized Wheel Ends
†
Kingpin Lubrication, Detroit
™
Axles
‡
Tie Rod Lubrication, Detroit
™
Axles
‡
Axle Breather and Axle Lubricant Level Inspection
Wheel Nut and Rim Nut Check
Air Brake System Valve Inspection
Air Dryer Inspection
Alcohol Evaporator Cleaning and Inspection
Meritor Slack Adjuster Lubrication
Drag Link Inspection
Power Steering Fluid Level Inspection
Power Steering Gear Lubrication
Drag Link Lubrication
Rack and Pinion Steering Gear Inspection
General Information
00
00/13
Maintenance
Operation Number
Check
Fuel Filter Replacement
Fuel Separator Sight Bowl Cleaning and Element Replacement
Cab Suspension Air Bag Inspection
Cab Access Stairs Inspection, Argosy COE
Mirror Folding Check
Air Conditioner Inspection
Air Filter Replacement
§
*
Inspect Meritor Unitized Wheel Ends at 200,000 miles (321 870 km0, then every 50,000 miles (80 470 km).
†
Check the end play at 200,000 miles (321 870 km), then every 200,000 miles (321 870 km).
‡
For Schedule II vehicles with Detroit axles, complete this procedure once a year or every 25,000 miles (40 000 km), whichever comes first.
§
Replace the HVAC filters every 6 months regardless of mileage.
Maintenance
Operation Number
Check
Lubrication and Fluid Level Check (includes the following):
• Clutch Release Cross-Shaft Lubrication
• Sleeve Assembly Bronze Bushing Lubrication
• Transmission Fluid Level Inspection
• Knuckle Pin Lubrication, Meritor Axles
• Tie Rod Lubrication, Meritor Axles
• Kingpin Lubrication, Detroit
™
Axles
• Tie Rod Lubrication, Detroit
™
Axles
• Axle Breather and Axle Lubricant Level Inspection
• Driveline Lubrication
• Power Steering Fluid Level Inspection
• Power Steering Gear Lubrication
• Drag Link Lubrication
• Cab Tilt Pump Reservoir Fluid Level and System Check
• Door Seal, Door Latch, and Door Hinge Lubrication
Perform All M1 Operations
Engine Noise Panel Inspection (noise emission control)
Engine Drive Belt Inspection
Engine-Support Fasteners Check (noise emission control)
Air Cleaner Element Inspection and Replacement
Alternator, Battery, and Starter Check
Pressure Relief Cap Check
Manual Transmission Air Filter/Regulator Check, Cleaning, or Replacement
General Information
00
00/14
Maintenance
Operation Number
Check
Suspension Inspection
Suspension U-Bolt Torque Check
Tie Rod Inspection
Basic Inspection, Meritor Unitized Wheel Ends
*
End-Play Check, Meritor Unitized Wheel Ends
†
Wheel Nut and Rim Nut Check
Driveline Inspection
Air Brake System Valve Inspection
Air Dryer Inspection
Alcohol Evaporator Cleaning and Inspection
Drag Link Inspection
Rack and Pinion Steering Inspection
Fuel Filter Replacement
Fuel Separator Sight Bowl Cleaning and Element Replacement
Cab Suspension Air Bag Inspection
Cab Access Stairs Inspection, Argosy COE
Mirror Folding Check
Air Conditioner Inspection
Air Filter Replacement
‡
*
Inspect Meritor Unitized Wheel Ends at 200,000 miles (321 870 km0, then every 50,000 miles (80 470 km).
†
Check the end play at 200,000 miles (321 870 km), then every 200,000 miles (321 870 km).
‡
Replace the HVAC filters every 6 months regardless of mileage.
General Information
00
00/15
you find detailed instructions in this manual on the
maintenance operations to be performed. Perform all
maintenance interval operations in M1 and M2 when
performing M3 maintenance interval operations.
Maintenance
Operation Number
Check
Perform All M1 Operations
Perform All M2 Operations
Radiator Pressure-Flushing and Coolant Change
Manual Transmission Fluid Change, and Magnetic Plug Cleaning (synthetic lubricant)
Axle Lubricant and Filter Change, and Magnetic Strainer Cleaning
Air Dryer Desiccant Replacement
Bendix E–6 Foot Control Valve Inspection and Lubrication
Power Steering Fluid and Filter Change
Bellows Replacement, Rack and Pinion Steering Gear
CAT CGI Bellows Replacement
General Information
00
00/16