Dongfeng EQ1030T47D-820. Instruction - page 19
Rear Axle & Rear Suspension
RA-1
Precaution:
Assemble the rubber parts under the vacuum conditions, tighten them at last.
No load: Full fuel, coolant and oil, equipped with spare tyre, jack, and driving tools.
Use the tools to disassemble and assemble the brake pipes.
Every time the suspension part is moved, the front wheel alignment must be checked, and adjust it if neces-
sary.
Rear Axle & Rear Suspension
RA-2
Rear Axle and Rear Suspension
Rear Axle & Rear Suspension
RA-3
Rear axle and rear suspension
Check rear axle and rear suspension parts for any looseness, wear, or damage.
Turn the left and right wheel to check if it is in normal con-
dition.
Retighten all the bolts and nuts to the required torque.
Tightening torque: aim to the requirement of rear suspen-
sion
Check the shock absorber for leakage or other damage.
Wheel bearing
Axle end clearance:
1.Check the bearing drive to see if it is smooth.
2.Check the axle end clearance.
Rear Axle & Rear Suspension
RA-4
Rear Axle
1.
Rear axle half axle
2.
Dustproof
3.
Half axle outer oil seal seat
4.
Half outer oil seal assy
5.
Half axle bearing seat
6.
Half axle supporting bearing
7.
Lock spacer
8.
Half axle bearing lock nut
9.
Rubber seal gasket assy
10.
Adjusting spacer
11.
Half axle inner oil seal assy
12.
Ventilation plug assy
13.
Rear axle housing assy
14.
Seal washer
15.
Screw plug assy
16.
Scerw plug
