Lincoln Blackwood (2002 year). Instruction - page 1

INFORMATION ABOUT THIS GUIDE

The information found in this guide was in effect at the time of printing.
Ford may change the contents without notice and without incurring
obligation.

EMISSION WARRANTY

The New Vehicle Limited Warranty includes Bumper-to-Bumper
Coverage, Safety Restraint Coverage, Corrosion Coverage, and 7.3L
Power Stroke Diesel Engine Coverage. In addition, your vehicle is eligible
for Emissions Defect and Emissions Performance Warranties. For a
detailed description of what is covered and what is not covered, refer to
the Warranty Guide that is provided to you along with your Owner’s
Guide.

SPECIAL NOTICES

Snowplowing

Your vehicle is not recommended for snowplowing. Ford makes no
representation as to the suitability of your vehicle for snowplowing, in
particular regarding the potential for exceeding vehicle weight limits,
airbag (SRS) deployment sensitivity, vehicle crash integrity, or
powertrain durability. The Snowplow Package Option is not available.

Using your vehicle as an ambulance

Do not use this vehicle as an ambulance.

Your vehicle is not equipped with the Ford Ambulance Preparation
Package.

Notice to owners of pickup trucks and utility type vehicles

Utility vehicles have a significantly higher rollover rate than
other types of vehicles.

Before you drive your vehicle, please read this Owner’s Guide carefully.
Your vehicle is not a passenger car. As with other vehicles of this type,
failure to operate this vehicle correctly may result in loss of vehicle
control, vehicle rollover, personal injury or death.

Introduction

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

These are some of the symbols you may see on your vehicle.

Vehicle Symbol Glossary

Safety Alert

See Owner’s Guide

Fasten Safety Belt

Air Bag-Front

Air Bag-Side

Child Seat

Child Seat Installation
Warning

Child Seat Lower
Anchor

Child Seat Tether
Anchor

Brake System

Anti-Lock Brake System

Brake Fluid -
Non-Petroleum Based

Traction Control

AdvanceTrac

Master Lighting Switch

Hazard Warning Flasher

Fog Lamps-Front

Fuse Compartment

Fuel Pump Reset

Windshield Wash/Wipe

Windshield
Defrost/Demist

Rear Window
Defrost/Demist

Introduction

4

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Vehicle Symbol Glossary

Power Windows
Front/Rear

Power Window Lockout

Child Safety Door
Lock/Unlock

Interior Luggage
Compartment Release
Symbol

Panic Alarm

Engine Oil

Engine Coolant

Engine Coolant
Temperature

Do Not Open When Hot

Battery

Avoid Smoking, Flames,
or Sparks

Battery Acid

Explosive Gas

Fan Warning

Power Steering Fluid

Maintain Correct Fluid
Level

MAX

MIN

Emission System

Engine Air Filter

Passenger Compartment
Air Filter

Jack

Check fuel cap

Low tire warning

Introduction

5

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driver

air bag

(pg. 109)

Hood

release

(pg. 167)

Speed

control

(pg. 50)

Parking brake

release

(pg. 129)

Instrument

panel

dimmer control

(pg. 17)

Power adjustable

foot pedals

(pg. 18)

Rear window

defroster

control

(pg. 19)

Headlamp

control

(pg. 16)

Turn signal and

wiper/washer control

(pg. 50)

Instrument cluster

(pg. 8)

Gearshift (includes

overdrive button)

(pg. 136)

Instrumentation

6

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Clock

(pg. 21)

Audio system

(pg. 23)

Climate

control system

(pg. 41)

Auxiliary

power point

(pg. 19)

Traction control

(pg. 132)

Auxiliary

audio controls

(pg. 55)

Auxiliary

climate controls

(pg. 55)

Instrumentation

7

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WARNING LIGHTS AND CHIMES

Low fuel

Illuminates when the fuel level in
the fuel tank is at, or near, empty
(refer to Fuel gauge in this chapter
for more information).

Service engine soon

Illuminates briefly to ensure the
system is functional. If it comes on
after the engine is started, one of
the engine’s emission control
systems may be malfunctioning. The light may illuminate without a
driveability concern being noted. The vehicle will usually be drivable and
will not require towing.

Light turns on solid:

Temporary malfunctions may cause the light to illuminate. Examples are:

1. The vehicle has run out of fuel.

2. Poor fuel quality or water in the fuel.

3. The fuel cap may not have been properly installed and securely
tightened.

These temporary malfunctions can be corrected by filling the fuel tank
with high quality fuel of the recommended octane and/or properly
installing and securely tightening the fuel cap. After three driving cycles
without these or any other temporary malfunctions present, the light
should turn off. (A driving cycle consists of a cold engine startup
followed by mixed city/highway driving.) No additional vehicle service is
required.

LOW

FUEL

SERVICE

ENGINE

SOON

Instrumentation

8

-------------------------------------------------------------------------------------------------------------------------------------------------------------

If the light remains on, have your vehicle serviced at the first available
opportunity.

Light is blinking:

Engine misfire is occurring which could damage your catalytic converter.
You should drive in a moderate fashion (avoid heavy acceleration and
deceleration) and have your vehicle serviced at the first available
opportunity.

Under engine misfire conditions, excessive exhaust temperatures
could damage the catalytic converter, the fuel system, interior

floor coverings or other vehicle components, possibly causing a fire.

Air bag readiness

Illuminates to confirm that the air
bags (front or side) are operational.
If the light fails to illuminate,
continues to flash or remains on,
have the system serviced immediately.

Safety belt

Illuminates to remind you to fasten
your safety belts. For more
information, refer to the Seating
and safety restraints
chapter.

Brake system warning

To confirm the brake system
warning light is functional, it will
momentarily illuminate when the
ignition is turned to the ON position
(alternatively for some vehicles when the ignition is moved from the ON
position to START position, the light will momentarily illuminate prior to
reaching the START position). It also illuminates if the parking brake is
engaged. If the brake system warning light does not illuminate as
described, seek service immediately. Illumination after the parking brake
is released indicates low brake fluid level or a brake system malfunction
and the brake system should be serviced immediately by a qualified
technician.

Refer to Brakes in the Driving chapter for more information.

Instrumentation

9

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Anti-lock brake system (ABS)

To confirm the anti-lock brake
system (ABS) warning light is
functional it will momentarily
illuminate when the ignition is
turned to the ON position
(alternatively for some vehicles when the ignition is moved from the ON
position to the START position, the light will momentarily illuminate just
prior to reaching the START position). If the light remains on, continues
to flash or fails to illuminate, have the ABS serviced immediately. If the
ABS light remains on, it means the anti-lock brake system has
malfunctioned and is disabled, however, the normal brake system will
still function unless the brake warning light also remains illuminated and
parking brake is off. Refer to Brakes in the Driving chapter for more
information.

Turn signals

Illuminates when the turn signals or
the hazard lights are turned on. If
the lights stay on continuously or
flash faster, check for a burned-out bulb.

High beams

Illuminates when the high beam
headlamps are turned on.

SecuriLock

anti-theft system

Illuminates when the anti-theft
alarm system is armed. If the light
fails to illuminate, continues to flash
or remains on, have the system serviced.

Refer to SecuriLock

passive anti-theft system in the Controls and

features chapter.

Charging system

Illuminates when the battery is not
charging properly.

ABS

Instrumentation

10

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Oil pressure/Engine coolant

Illuminates when the engine coolant
temperature is above the normal
range or the engine oil pressure is
below normal range. Check the
engine oil and coolant level refer to
Adding engine oil and Adding coolant in the Maintenance and care
chapter.

Transmission control indicator light (TCIL)

Illuminates when the overdrive
function of the transmission has
been turned OFF using the
Transmission Control Switch (TCS).
Refer to the Driving chapter for
transmission function and operation.

If the light does not come on or if the light flashes steadily, have your
vehicle serviced as soon as possible, damage to the transmission could
occur.

Door ajar

Illuminates when any door or
tonneau cover is open.

Traction Control

active

Illuminates when the Traction
Control

娂 system is active. It will be

lit for a minimum of four seconds or
for the duration of the Traction
Control

娂 event.

For more information, refer to the
Driving chapter.

OVERDRIVE

DOOR

AJAR

Instrumentation

11

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Check air suspension (if equipped)

Illuminates when the air suspension
switch is turned OFF, the load limit
is exceeded or the air suspension
system requires servicing.

For information on the air suspension system, refer to the Driving
chapter.

Low washer fluid

Illuminates when the windshield
washer fluid is low.

Safety belt warning chime

Sounds to remind you to fasten your safety belts.

BeltMinder

chime

Sounds intermittently to remind you to fasten your safety belts.

Supplemental restraint system (SRS) warning chime

Sounds when a malfunction in the supplemental restraint system (front
or side airbags) has been detected. Have the supplemental restraint
system inspected immediately.

Key-in-ignition warning chime

Sounds when the key is left in the ignition and the driver’s door is
opened.

Headlamps on warning chime

Sounds when the headlamps or parking lamps are on, the key is removed
from the ignition and the driver’s door is opened.

CK

SUSP

Instrumentation

12

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GAUGES

Fuel gauge

Displays approximately how much
fuel is in the fuel tank. The fuel
gauge may vary slightly when the
vehicle is in motion or on a grade.

When refueling the vehicle from
empty indication, the amount of fuel
that can be added will be less than
the advertised capacity due to the
reserve fuel.

A minimum of 22.2 L (six gallons)
must be added to the fuel tank in order for the gauge to instantaneously
update. If less than six gallons is the change, the gauge will take between
five to twenty minutes to update.

Speedometer

Indicates the current vehicle speed.

E

F

FUEL DOOR

MPH

km/h

km/h

20

40

60

80

60

40

20

00

Instrumentation

13

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Engine coolant temperature gauge

Indicates the temperature of the
engine coolant. At normal operating
temperature, the needle remains
within the normal area (the area
between the “H” and “C”). If it
enters the red section, the engine is
overheating. Stop the vehicle as
soon as safely possible, switch off
the engine immediately and let the
engine cool. Refer to Engine
coolant
in the Maintenance and
care
chapter.

Never remove the coolant reservoir cap while the engine is
running or hot. Steam and scalding liquid from a hot cooling

system can burn you badly.

This gauge indicates the temperature of the engine coolant, not the
coolant level. If the coolant is not at its proper level the gauge indication
will not be accurate. If the gauge enters the red section, the oil
pressure/engine coolant
and Check Engine/Service Engine Soon
indicators illuminate, refer to What you should know about fail-safe
cooling
in the Maintenance and care chapter.

Odometer

Registers the total kilometers
(miles) of the vehicle.

Trip odometer

Registers the kilometers (miles) of
individual journeys. Press and
release the reset button until a ’T’
appears in the display (this
represents the trip mode). Press
and hold the button for three seconds to reset.

C

H

D

P RN

D

2

SELECT

RESET

Instrumentation

14

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Tachometer

Indicates the engine speed in
revolutions per minute.

Driving with your tachometer
pointer continuously at the top of
the scale may damage the engine.

Battery voltage gauge

Indicates battery voltage. If the
pointer moves and stays outside the
normal operating range, have the
vehicle’s electrical system checked
as soon as possible.

Engine oil pressure gauge

Indicates engine oil pressure. At
normal operating temperature, the
needle will be in the normal range
(the area between the “L” and “H”);
if the needle goes below the normal
range, stop the vehicle as soon as
safely possible and switch off the
engine immediately. Check the oil
level. Add oil if needed (refer to
Engine oil in the Maintenance
and care
chapter). If the oil level is correct, have your vehicle checked
at your dealership or by a qualified technician.

RPMX1000

L

H

L

H

Instrumentation

15

-------------------------------------------------------------------------------------------------------------------------------------------------------------

HEADLAMP CONTROL

Rotate the headlamp control to the
first position to turn on the parking
lamps.

Rotate to the second position to
turn on the headlamps.

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.

Flash to pass

Pull toward you slightly to activate
and release to deactivate.

Controls and features

16

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Foglamp control

The headlamp control also operates
the foglamps. The foglamps can be
turned on only when the headlamp
control is in the

position and

the high beams are not turned on.

Pull headlamp control towards you
to turn foglamps on. The foglamp
indicator light

will illuminate.

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel and all applicable
switches in the vehicle during
headlamp and parklamp operation.

Move the control to the full upright
position, past detent, to turn on the
interior lamps.

Move the control to the full down
position, past detent, to prevent the
interior lights from illuminating when the doors are opened.

A

Controls and features

17

-------------------------------------------------------------------------------------------------------------------------------------------------------------

AUTOLAMP CONTROL

The autolamp system provides light
sensitive automatic on-off control of
the exterior lights normally
controlled by the headlamp control.

The autolamp system also keeps the
lights on for approximately 20
seconds after the ignition switch is
turned to the OFF position.
• To turn autolamps on, rotate the

control counterclockwise.

• To turn autolamps off, rotate the control clockwise to the OFF

position.

• Foglamps are not controlled by the autolamps. In order to turn on the

foglamps, you must turn the lamp switch to the

position and

pull toward you for foglamps.

POWER ADJUSTABLE FOOT PEDALS

The accelerator and brake pedal
should only be adjusted when the
vehicle is stopped and the gearshift
lever is in the P(Park) position.

Press and hold the rocker control to
adjust accelerator and brake pedal toward you or away from you.

The adjustment allows for approximately 76 mm (3 inches) of maximum
travel.

Never adjust the accelerator and brake pedal with feet on pedals
or while the vehicle is moving.

A

PEDALS

Controls and features

18

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Рассказать друзьям

Страницы