Dodge 2500 Diesel (2005 year). Instruction - page 6

UConnect™ allows you to transfer calls between the
system and your cellular phone as you enter or exit your
vehicle, and enables you to mute the system’s micro-
phone for private conversation.

The UConnect™ phonebook enables you to store up to 32
names and four numbers per name. Each language has a
separate 32 name phonebook accessible only in that
language. This system is driven through your Blue-
tooth™ Hands-Free profile cellular phone. UConnect™
features Bluetooth™ technology - the global standard
that enables different electronic devices to connect to
each other without wires or a docking station, so UCon-
nect works no matter where you stow your cellular
phone (be it your purse, pocket, or briefcase), as long as
your phone is turned on and has been paired to the
vehicle’s UConnect™ system. The UConnect™ system
allows up to seven cellular phones to be linked to system.
Only one linked (or paired) cellular phone can be used

with the system at a time. The system is available in
English, Spanish, or French languages (as equipped).

The rearview mirror contains the microphone for the
system and the control buttons that will enable you to
access the system. The diagram below shows the mirror
with the appropriate buttons. Individual button behavior
is discussed in the

⬙Operation⬙ section.

UConnect™ Switches

84

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

The UConnect™ system can be used with any Hands-
Free Profile certified Bluetooth™ cellular phone. If your
cellular phone supports a different profile (eg., Headset
Profile), you may not be able to use any UConnect™
features. Refer to your cellular service provider or the
phone manufacturer for details.

The UConnect™ system is fully integrated with the
vehicle’s audio system. The volume of the UConnect™
system can either be adjusted from the radio volume
control knob, or from the steering wheel radio control
(right switch), if so equipped.

The radio display will be used for visual prompts from
the UConnect™ system such as

⬙CELL⬙ or caller ID on

certain radios.

Operation
Voice commands can be used to operate the UConnect™
system and to navigate through the UConnect™ menu
structure. Voice commands are required after most
UConnect™ system prompts. You will be prompted for a
specific command and then guided through the available
options.

• Prior to giving a voice command, one must wait for

the voice on beep, which follows the

⬙Ready⬙ prompt

or another prompt.

• For certain operations, compound commands can be

used. For example, instead of saying

⬙Setup⬙ and then

⬙Phone Pairing,⬙ the following compound command
can be said:

⬙Setup Phone Pairing.⬙

• For each of the feature explanation in this section, only

the combined form of the voice command is given.
You can also break the commands into parts and say
each part of the command, when you are asked for it.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

85

3

For example, you can either use the combined form
voice command

⬙Phonebook New Entry,⬙ or you can

break the combined form command into two voice
commands:

⬙Phonebook⬙ and ⬙New Entry.⬙ Please re-

member, the UConnect™ system works best when you
talk in a normal conversational tone, as if speaking to
some one sitting eight feet away from you.

Voice Command Tree
Refer to “Voice Tree” at the end of this section.

Help Command
If you need assistance at any prompt or if you want to
know what your options are at any prompt, say

⬙Help⬙

following the voice on beep. The UConnect™ system will
play all the options at any prompt if you ask for help.

To activate the UConnect™ system from idle, simply
press the ’Phone’ button and follow audible prompts for
directions. All UConnect™ system sessions begin with a
press of the ’Phone’ button on the mirror.

Cancel Command
At any prompt, after the voice on beep, you can say

⬙Cancel⬙ and you will be returned to the main menu.
However, in a few instances the system will take you
back to the previous menu.

Pair (Link) UConnect™ System to a Cellular Phone
To begin using your UConnect™ system, you must pair
your compatible Bluetooth™ enabled cellular phone (re-
fer to

⬙Introduction⬙ section to learn about the phone

type). To complete the pairing process, you will need to
reference your cellular phone owner’s manual. One of the
following vehicle specific websites may also provide
detailed instructions for pairing with the brand of phone
that you have:

NOTE:

www.chrysler.com/uconnect
www.dodge.com/uconnect
www.jeep.com/uconnect

86

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

The following are general phone to UConnect™ System
pairing instructions:

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Setup Phone Pairing.⬙

• When prompted, after the voice on beep, say ⬙Pair a

Phone.

• You will be asked to say a four-digit pin number which

you will later need to enter into your cellular. You can
enter any four-digit pin number. You will not need to
remember this pin number after the initial pairing
process.

• The UConnect™ system will then prompt you to begin

the cellular phone pairing process on your cellular
phone. Before attempting to pair phone, please see
your cellular phone’s user manual (Bluetooth section)
for instructions on how to complete this step.

• For identification purposes, you will be prompted to

give the UConnect™ system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.

• You will then be asked to give your cellular phone a

priority level between 1 and 7, 1 being the highest
priority. You can pair up to seven cellular phones to
your UConnect™ system. However, at any given time,
only one cellular phone can be in use, connected to
your UConnect™ System. The priority allows the
UConnect™ system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if priority 3 and priority 5
phones are present in the vehicle, the UConnect™
system will use the priority 3 cellular phone when you
make a call. You can select to use a lower priority
cellular phone at any time (refer to

⬙Advanced Phone

Connectivity

⬙ section).

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

87

3

Dial by Saying a Number

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Dial.⬙

• System will prompt you to say the number you want

call.

• For example, you can say ⬙234-567-8901.⬙ The phone

number that you enter must be of valid length and
combination. The UConnect™ limits the user from
dialing invalid combination of numbers. For example,
234-567-890 is nine digits long, which is not a valid
phone number - the closest valid phone number has
ten digits.

• The UConnect™ system will confirm the phone num-

ber and then dial. The number will appear in the
display of certain radios.

Call by Saying a Name

• Press the “Phone” button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Call.⬙

• System will prompt you to say the name of the person

you want call.

• After the ⬙Ready⬙ prompt and the following beep, say

the name of the person you want to call. For example,
you can say

⬙John Doe,⬙ where John Doe is a previ-

ously stored name entry in the UConnect™ phone-
book. Refer to section

⬙Add Names to Your UCon-

nect™ Phonebook,

⬙ to learn how to store a name in the

phonebook.

• The UConnect™ system will confirm the name and

then dial the corresponding phone number, which
may appear in the display of certain radios.

88

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Add Names to Your UConnect™ Phonebook

NOTE:

Adding names to phonebook is recommended

when vehicle is not in motion.

• Press the “Phone” button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook New Entry.⬙

• When prompted, say the name of the new entry. Use of

long names helps the voice recognition and is recom-
mended. For example, say

⬙Robert Smith⬙ or ⬙Robert⬙

instead of

⬙Bob.⬙

• When prompted, enter the number designation (e.g.:

⬙Home,⬙ ⬙Work,⬙ ⬙Mobile,⬙ or ⬙Pager⬙). This will allow
you to store multiple numbers for each phonebook
entry, if desired.

• When prompted, recite the phone number for the

phonebook entry that you are adding.

After you are finished adding an entry into the phone-
book, you will be given the opportunity to add more
phone numbers to the current entry or to return to the
main menu.

The UConnect™ system will allow you to enter up to 32
names in the phonebook with each name having up to
four associated phone numbers and designations. Each
language has a separate 32 name phonebook accessible
only in that language.

Edit Entries in the UConnect™ Phonebook

NOTE:

Adding names to phonebook is recommended

when vehicle is not in motion.

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook Edit.⬙

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

89

3

• You will then be asked for the name of the phonebook

entry that you wish to edit.

• Next, choose the number designation (home, work,

mobile, or pager) that you wish to edit.

• When prompted, recite the new phone number for the

phonebook entry that you are editing.

After you are finished editing an entry in the phonebook,
you will be given the opportunities to edit another entry
in the phonebook, call the number you just edited, or
return to the main menu.

⬙Phonebook Edit⬙ can be used to add another phone
number to a name entry that already exists in the
phonebook. For example, the entry John Doe may have a
mobile and a home number, but you can add John Doe’s
work number later using the

⬙Phonebook Edit⬙ feature.

Delete Entries in the UConnect™ Phonebook

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook Delete.⬙

• After you enter the Phonebook Delete menu, you will

then be asked for the name of the entry that you wish
to delete. You can either say the name of a phonebook
entry that you wish to delete or you can say

⬙List

Names

⬙ to hear a list of the entries in the phonebook

from which you choose. To select one of the entries
from the list, press the

⬙Voice Recognition⬙ button

while the UConnect™ system is playing the desired
entry and say

⬙Delete.⬙

• After you enter the name, the UConnect™ system will

ask you which designation you wish to delete: home,
work, mobile or pager. Say the designation you wish
to delete.

90

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

After confirmation, the phonebook entries will be de-
leted. Note that only the phonebook in the current
language is deleted.

Delete All Entries in the UConnect™ Phonebook

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook Erase All.⬙

• The UConnect™ system will ask you to verify that you

wish to delete all the entries from the phonebook.

• After confirmation, the phonebook entries will be

deleted.

List All Names in the UConnect™ Phonebook

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook List Names.⬙

• The UConnect™ system will play the names of all the

phonebook entries.

• To call one of the names in the list, press the ⬙Voice

Recognition’ button during the playing of the desired
name and say

⬙Call⬙. NOTE: the user can also exercise

⬙Edit⬙ or ⬙Delete⬙ operations at this point.

• The UConnect™ system will then prompt you as to

number designation you wish to call.

• The selected number will be dialed.

Phone Call Features
The following features can be accessed through the
UConnect™ system if the feature(s) are available on your
cellular service plan. For example, if your cellular service
plan provides three-way calling, this feature can be
accessed through the UConnect™ system. Check with
your cellular service provider for the features that you
have.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

91

3

Answer or Reject an Incoming Call - No Call
Currently in Progress
When you receive a call on your cellular phone, the
UConnect™ system will interrupt the vehicle audio
system, if on, and will ask if you would like to answer the
call. To reject the call, press and hold the ’Phone’ button
until you hear a single beep indicating that the incoming
call was rejected.

Answer or Reject an Incoming Call - Call
Currently in Progress
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your cell
phone. Press the ’Phone’ button to place the current call
on hold and answer the incoming call. NOTE: The
UConnect™ system compatible phones in market today
do not support rejecting an incoming call when another
call is in progress. Therefore, the user can only either
answer an incoming call or ignore it.

Making a Second Call while Current Call in
Progress
To make a second call while you are currently in a call,
press the ’Voice Recognition’ button and say

⬙Dial⬙ or

⬙Call⬙ followed by the phone number or phonebook entry
you wish to call. The first call will be on hold while the
second call is in progress. To go back to the first call, refer
to section

⬙Toggling Between Two Calls.⬙ To combine two

calls, refer to section

⬙Conference Call.⬙

Place/Retrieve a Call from Hold
To put a call on hold, press the

⬘Phone’ button until you

hear a single beep which will indicate that the call has
been placed on hold. To bring the call back from hold,
press and hold the

⬘Phone’ button until you hear a single

beep.

92

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the ’Phone’ button until you hear a single beep
indicating that the active and hold status of the two calls
have switched. Only one call can be placed on hold at one
time.

Conference Call
When two calls are in progress (one active and one on
hold), press and hold the ’Phone’ button until you hear a
double beep indicating that the two calls have been
joined into one conference call.

Three-Way Calling
To initiate three-way calling, press the ’Voice Recogni-
tion’ button while a call is in progress and make a second
phone call as described in section

⬙Making a Second Call

while Current Call in Progress.

⬙ After the second call has

established, press and hold the ’Phone’ button until you
hear a double beep indicating that the two calls have
been joined into one conference call.

Call Termination
To end a call in progress, momentarily press the

⬘Phone’

button. Only the active call(s) will be terminated and if
there is a call on hold, it will become the new active call.

Redial

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Redial.⬙

• The UConnect™ system will call the last number that

was dialed on your cellular phone. Note: this may not
be the last number dialed from the UConnect™ sys-
tem.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

93

3

Call Continuation
Call continuation is progression of a phone call on
UConnect™ system after the vehicle ignition key has
been switched to off. Call continuation functionality
available on the vehicle can be any one of three types:

• After ignition key is switched off, a call can continue

on the UConnect™ system either until the call ends or
until the vehicle battery condition dictates cessation of
the call on the UConnect™ system and transfer of the
call to the mobile phone.

• After ignition key is switched to off, a call can continue

on the UConnect™ system for certain duration, after
which the call is automatically transferred from the
UConnect™ system to the mobile phone.

• An active call is automatically transferred to the

mobile phone after ignition key is switched to off.

UConnect™ System Features

Language Selection
To change the language that the UConnect™ system is
using,

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

the name of the language you wish to switch to
(English, Espanol, or Francais, if so equipped).

• Continue to follow the system prompts to complete

language selection.

After selecting one of the languages, all prompts and
voice commands will be in that language.

NOTE:

After every UConnect™ language change op-

eration, only the language specific 32 name phonebook is
usable. The phone pairing is not language specific and
usable across all languages.

94

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Emergency Assistance
If you are in an emergency and the mobile phone is
reachable:

• Pick up the phone and manually dial the emergency

number for your area.

If the phone is not reachable and the UConnect™ system
is operational, you may reach the emergency number as
follows:

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Emergency⬙ and the UConnect™ system will instruct
the paired cellular phone to call the emergency num-
ber. This feature is only supported in the USA.

NOTE:

The emergency number dialed is based on the

Country where the vehicle is purchased (911 for USA/
Canada and 060 for Mexico). The number called may not
be applicable with the available cellular service and area.

The UConnect™ system does slightly lower your chances
of successfully making a phone call as to that for the cell
phone directly.

Your phone must be turned on and paired to the UCon-
nect™ system to allow use of this vehicle feature in
emergency situations when the cell phone has network
coverage and stays paired to the UConnect™ system.

Towing Assistance
If you need towing assistance,

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Towing Assistance.⬙

NOTE:

The Towing Assistance number dialed is based

on the Country where the vehicle is purchased (1-800-
528-2069 for USA, 1-877-213-4525 for Canada, 55-14-3454
for Mexico city and 1-800-712-3040 for outside Mexico
city in Mexico).

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

95

3

Please refer to the 24-Hour Towing Assistance coverage
details in the DaimlerChrysler Corporation 24-Hour
Towing Assistance Program Guide.

Paging
To learn how to page, refer to section

⬙Working with

Automated Systems.

⬙ Paging works properly except for

pagers of certain companies which time-out a little too
soon to work properly with the UConnect™ system.

Voice Mail Calling
To learn how to access your voice mail, refer to section

⬙Working with Automated Systems.⬙

Working with Automated Systems
This method is designed to be used in instances where
one generally has to press numbers on the cellular phone
keypad while navigating through an automated tele-
phone system.

You can use your UConnect™ system to access a voice-
mail system or an automated service, such as, paging
service or automated customer service. Some services
require immediate response selection, in some instances,
that may be too quick for use of UConnect™ system.

When calling a number with your UConnect™ system
that normally requires you to enter in a touch-tone
sequence on your cellular phone keypad, you can push
the ’Voice Recognition’ button and say the sequence you
wish to enter followed by the word

⬙Send.⬙ For example,

if required to enter your pin number followed with a
pound 3 7 4 6 #, you can press the ’Voice Recognition’
button and say

⬙3 7 4 6 # Send.⬙ Saying a number, or

sequence of numbers, followed by

⬙Send⬙ is also to be

used to navigate through an automated customer service
center menu structure and to leave a number on a pager.

96

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Barge In - Overriding Prompts
The ’Voice Recognition’ button can be used when you
wish to skip part of a prompt and issue your voice
recognition command immediately. For example, if a
prompt is playing

⬙Would you like to pair a phone, clear

a

ѧ,⬙ you could press the ’Voice Recognition’ button and

say

⬙Pair a Phone⬙ to select that option without having to

listen to the rest of the voice prompt.

Turning Confirmation Prompts On/Off
Turning confirmation prompts off will stop the system
from confirming your choices (e.g. the UConnect™ sys-
tem will not repeat a phone number before you dial it).

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Setup Confirmations.⬙ The UConnect™ system will
play the current confirmation prompt status and you
will be given the choice to change it.

Phone and Network Status Indicators
The UConnect™ system will provide notification to
inform you if your cellular phone is in roaming status,
has low signal strength, or has a low battery when you
are trying to place a phone call.

Dialing Using the Cellular Phone Keypad
You can dial a phone number with your cellular phone
keypad and still use the UConnect™ system (while
dialing via the cell phone keypad, the user must exercise
caution and take precautionary safety measures). By
dialing a number with your paired Bluetooth™ cellular
phone, the audio will be played through your vehicle’s
audio system. The UConnect™ system will work the
same as if you dial the number using voice recognition.

NOTE:

Certain brands of mobile phones do not send the

dial ring to the UConnect™ system to play it on the
vehicle audio system, so you will not hear it. Under this
situation, after successfully dialing a number, the user

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

97

3

may feel that the call did not go through even though the
call is in progress. Once your call is answered, you will
hear the audio.

Mute/Un-mute (Mute off)
When you mute the UConnect™ system, you will still be
able to hear the conversation coming from the other
party, but the other party will not be able to hear you. In
order to mute the UConnect™ system:

• Press the ’Voice Recognition’ button.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Mute.⬙

In order to un-mute the UConnect™ system:

• Press the ’Voice Recognition’ button.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Mute-off.⬙

Information Service
When using AT&T Wireless Service, dialing to phone
number

⬙#121,⬙ you can access voice activated automated

system to receive news, weather, stocks, traffic, etc.
related information.

Advanced Phone Connectivity

Transfer Call to and from Cellular Phone
The UConnect™ system allows on going calls to be
transferred to your cellular phone to the UConnect™
system without terminating the call. To transfer an ongo-
ing call from your UConnect™ paired cellular phone to
the UConnect™ system or vice-versa, press the ’Voice
Recognition’ button and say

⬙Transfer Call.⬙

Connect or Disconnect Link Between the
UConnect™ System and Cellular Phone
Your cellular phone can be paired with many different
electronic devices, but can only be actively

⬙connected⬙

with one electronic device at a time.

98

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

If you would like to connect or disconnect the Blue-
tooth™ connection between a UConnect™ paired cellular
phone and the UConnect™ system, follow the instruction
described in your cellular phone user’s manual.

List Paired Cellular Phone Names

• Press the ’Phone’ button to begin.
• After the “Ready” prompt and the following beep, say

“Setup Phone pairing”.

• When prompted, say ⬙List Phones⬙.
• The UConnect™ system will play the phone names of

all paired cellular phones in order from the highest to
the lowest priority. To “select” or “delete” a paired
phone being announced, press the

⬘Voice recognition’

button and say “Select” or “Delete”. Also, see next two
sections for alternate way of doing this.

Select another Cellular Phone
This feature allows you to select and start using another
phone with the UConnect™ system. The phone must
have been previously paired to the UConnect™ system
that you want to use it with.

• Press the ’Phone’ button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Setup Select Phone.⬙

• The phone names (along with priority numbers) will

be played.

• When prompted say the priority number of the cellu-

lar phone you wish to select. You can also press the

⬘Voice Recognition’ button anytime while the list is
being played and say the priority number.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

99

3

Рассказать друзьям

Страницы