Chrysler Le Baron, Dodge Dynasty, Plymouth Acclaim. Instruction - page 100
OUT OF CAR TRANSAXLE—DISASSEMBLE AND
ASSEMBLE
DIFFERENTIAL
Fig. 1 Remove or Install 2 Extension Outer Bolts
Fig. 2 Remove or Install 3 Differential Bearing
Retainer Outer Bolts
Fig. 3 Remove or Install Differential Cover Bolts
Fig. 4 Remove Differential Cover
Fig. 5 Differential Cover Removed
Fig. 6 Remove or Install 2 Extension Bolts
21 - 6
TRANSAXLE
Ä
GEAR SET
CAUTION: Tool 6252 must be used to remove or in-
stall this nut. Always install a NEW nut and tighten
to 258 N
I
m (190 ft. lbs.).
Fig. 7 Remove or Install Extension
Fig. 8 Remove or Install 3 Differential Bearing
Retainer Bolts
Fig. 9 Remove or Install Differential Bearing
Retainer
Fig. 10 Differential Assembly Removed
Fig. 1 Rear End Cover Bolts
Fig. 2 Rear End Cover Removed
Ä
TRANSAXLE
21 - 7
Fig. 3 Remove 5th Fork Roll Pin
Fig. 4 Install 5th Fork Roll Pin
Fig. 5 5th Fork and Sleeve
Fig. 6 Snap Ring
Fig. 7 Remove 5th Synchronizer Hub
Fig. 8 Install 5th Synchronizer Hub
21 - 8
TRANSAXLE
Ä
Fig. 9 Remove or Install 5th Gear Nut
Fig. 10 Bearing Retainer Plate Bolts
Fig. 11 Bearing Retainer Plate
Fig. 12 Interlock Shuttles
Fig. 13 Interlock Plate
Ä
TRANSAXLE
21 - 9