DAF LF45, LF55 Series. Instruction - page 52
©
2-1
EBS-2 customer parameters
EBS-2
DAVIE XD diagnostics manual
12
2. EBS-2 CUSTOMER PARAMETERS
2.1 INTRODUCTION
Customer parameters
Customer parameters are the settings of an
electronic system. The customer parameters
permit adapting control functions of a system to
the customer's particular wishes and/or needs
within certain limits. The customer parameters
are stored in a list in the memory of the electronic
unit. Customer parameters can be modified using
the programming feature of DAVIE XD.
Programming using DAVIE XD is only possible if
the logged-in user has been registered as a
"Master Technician".
Note:
Erroneous settings of customer parameters may
affect the action of control functions to such an
extent that they function eratically or not at all.
After modification of the settings the (modified)
customer parameters must be stored in the
electronic unit using the programming function in
the customer parameter overview.
Customer parameter names and codes
Each customer parameter in a system has its
own name and code. The following explanation of
the customer parameters includes only the
codes. The availability of a customer parameter
in a system depends on the programmed
software in the electronic unit. The programmed
software depends on the vehicle configuration/
identity card data.
Standard values
Standard values, options and setting ranges may
vary according to the software variants of
DAVIE XD and the system. This is why they have
not been included in the following explanation of
the customer parameters.
EBS-2
2-2
©
EBS-2 customer parameters
DAVIE XD diagnostics manual
12
2.2
E
X
P
LANATORY
NOTES
TO EBS
-2 CUS
TOMER P
ARAMET
E
RS
EBS Customer
para
meter
c
o
de
Exp
la
n
atio
n
D
e
p
en
de
nc
es:
Notes
Minimum
va
lu
e to be
se
t:
Ma
ximum
value
to
b
e
set:
3
-0
1
T
his is
a
co
mfort
p
arameter settin
g which de
te
rmi
nes
the pul
sing "P-in
sh
ot"
to the draw
n
ve
hicle
.
0
b
ar
3.5
bar
The
pressure
pulse
activation
"P insh
ot" is on
ly avai
lab
le
on FT
ve
hicle
s an
d is
o
nly active if
a
dra
w
n vehicl
e
without EBS
syste
m
is coup
led
.
Thi
s setting can
be
ch
ange
d if:
-
there
is
a compl
aint re
lati
ng
to the towing
of
the
d
ra
w
n vehi
cl
e when
b
ra
king is sta
rte
d.
©
3-1
System inspection with DAVIE XD
EBS-2
DAVIE XD diagnostics manual
12
3. SYSTEM INSPECTION WITH DAVIE XD
3.1 GENERAL
If the vehicle has been modified and the
configuration changed, the electronic unit may
have to be re-programmed.
EBS-2
3-2
©
System inspection with DAVIE XD
12
DAVIE XD diagnostics manual
3.2 VSC CALIBRATION
Using DAVIE, the VSC calibration must be
activated after the following operations:
-
replacing EBS-2 electronic unit
-
replacing VSC module
-
changes to parameter setting
The slip indicator on the instrument panel will be
activated while the VSC is being calibrated and
will go off when VSC calibration has been
successfully completed.
When VSC calibration is active, a calibration error
code can also be displayed by means of DAVIE.
Note:
-
The slip indicator is not activated during VSC
calibration on vehicles with production date
<2004-21. On these vehicles the fact that the
calibration error code is no longer present on
DAVIE indicates that calibration has been
successfully completed.
-
VSC calibration takes place automatically
and is completed when the vehicle has been
driven a total of approximately 250 m in the
straight-ahead position. This distance of 250
m in the straight-ahead position does not
have to be covered in one go: the steering
wheel can be turned from time to time.
-
VSC control functions cannot be activated
while calibration is being carried out.