DAF CF65, CF75, CF85 Series . Instruction - page 56
©
1-1
AGS fault codes
AGS
DAVIE XD diagnostics manual
14
1. AGS FAULT CODES
1.1 INTRODUCTION
If the electronic unit detects a system fault, this
fault is usually stored in the memory of the
electronic unit as a fault code.
Most system faults will also generate a warning.
AGS
1-2
©
AGS fault codes
14
DAVIE XD diagnostics manual
1.2 EXPLANATORY NOTES TO AGS (DIAPHRAGM VERSION) FAULT CODES
Fault code
Fault code description with possible cause
Symptom
01-33
No pressure build-up detected by the pressure
switch during the pumping time cycle due to:
-
insufficient amount of grease in the reservoir
-
open connection in the main pipe of the
greasing system
-
air in the system
-
interrupted pressure switch
-
interruption on pin 2 of the ECU
-
No grease is supplied to the lubricating
points
-
AGS warning on the display is activated
01-34
Pressure build-up detected by the pressure
switch before the pumping time cycle is started
due to:
-
closed pressure switch
-
short circuit to earth on pin 2 of the ECU
-
No grease is supplied to the lubricating
points
02-03
Short circuit to supply in automatic lubrication
pump due to:
-
short circuit to supply on pin 4 of the ECU
-
Pump remains continuously active
-
Insufficient grease is supplied to the
lubricating points
02-05
Interruption in automatic lubrication pump due to:
-
interruption on pin 4 of the ECU
-
interruption on pin 9 of the ECU
-
No grease is supplied to the lubricating
points
03-04
Short circuit to earth at AGS warning light due to:
-
short circuit to earth on pin 5 of the ECU
-
AGS warning is not activated
03-05
Interruption in AGS warning light due to:
-
interruption on pin 5 of the ECU
-
AGS warning is not activated
©
1-3
AGS fault codes
AGS
DAVIE XD diagnostics manual
14
1.3 EXPLANATORY NOTES TO AGS (BELLOWS VERSION) FAULT CODES
Fault code
Fault code description with possible cause
Symptom
01-33
No pressure build-up detected by the integrated
pressure switch during the pumping time cycle
due to:
-
insufficient amount of grease in the reservoir
-
open connection in the main pipe of the
greasing system
-
air in the system
-
interrupted integrated pressure switch
-
No grease is supplied to the lubricating
points
-
AGS warning on the display is activated
01-34
Pressure build-up detected by the integrated
pressure switch before the pumping time cycle is
started due to:
-
closed integrated pressure switch
-
No grease is supplied to the lubricating
points
02-03
Internal short circuit to supply in automatic
lubrication pump
-
Pump remains continuously active
-
Insufficient grease is supplied to the
lubricating points
02-05
Internal interruption in automatic lubrication pump -
No grease is supplied to the lubricating
points
03-04
Short circuit to earth in AGS warning light due to:
-
short circuit to earth on pin 4 of the ECU
-
AGS warning is not activated
03-05
Interruption in AGS warning light due to:
-
interruption on pin 4 of the ECU
-
AGS warning is not activated
AGS
1-4
©
AGS fault codes
14
DAVIE XD diagnostics manual