Chrysler 300/300 Touring/300C, Dodge Magnum. Instruction - page 74

8. Clean hub face (1) to remove any dirt or corrosion
where rotor mounts.
9. Install brake rotor (2) over studs on hub and
bearing.
10. Install disc brake caliper and adapter assembly
(2) over brake rotor.
11. Install mounting bolts (1) securing caliper adapter
(2) to knuckle (3). Tighten bolts to 169 N·m (125
ft. lbs.) torque.
12. Pull lower end of shock assembly outward, then
slide clevis bracket (3) onto lower end. Slide cle-
vis bracket onto shock assembly until bracket
contacts collar on shock housing (2).
13. Install pinch bolt and nut (1) fastening clevis
bracket (3) to bottom of shock assembly (2).
Install pinch bolt from rear. Do not tighten at this
time.
3 - 28
SHAFT-HALF (FRONT)
LX

14. Slide clevis bracket (2) over bushing mounted in
lower control arm (7).
15. Install bolt (1) and nut (3) attaching shock clevis
bracket (2) to lower control arm (7). Do not
tighten at this time.
16. Tighten pinch bolt (1) attaching clevis bracket to
shock assembly to 61 N·m (45 ft. lbs.) torque.
17. Slide stabilizer link ball joint stem into clevis
bracket. Install nut (2) fastening link to clevis
bracket (3). Tighten nut by holding ball joint stud
while turning nut. Tighten nut using crow foot
wrench on torque wrench to 146 N·m (108 ft. lbs.)
torque.
LX
SHAFT-HALF (FRONT)
3 - 29

18. Attach wheel speed sensor cable routing clip (3)
at knuckle (4).
19. Install hub nut (1) on end of axle half shaft (2).
While a helper applies brakes to keep hub from
turning, tighten hub nut to 213 N·m (157 ft. lbs.)
torque.
20. Install tire and wheel assembly (1) (Refer to 22 -
TIRES/WHEELS - INSTALLATION). Tighten wheel
mounting nuts (3) to 150 N·m (110 ft. lbs.) torque.
21. Lower vehicle.
3 - 30
SHAFT-HALF (FRONT)
LX

NOTE: When tightening lower shock clevis mount-
ing bolt, do not attempt rotating bolt. Bolt shaft is
serrated. Turn nut only.
22. Tighten lower shock clevis bracket bolt nut (3) to
174 N·m (128 ft. lbs.) torque.
SPECIFICATIONS - HALFSHAFT
TORQUE SPECIFICATIONS
DESCRIPTION
N·m
Ft. Lbs.
In. Lbs.
Nut, Halfshaft Hub
213
157
—
Bolt, Intermediate
Shaft-to-Oil Pan
25
18
—
LX
SHAFT-HALF (FRONT)
3 - 31