Chrysler 300/300 Touring/300C, Dodge Magnum. Instruction - page 70
7. Torque center bearing-to-body bolts to 27 N·m (20
ft. lbs.).
8. Install heat shield (1).
9. Install rear exhaust system (2)
3 - 12
SHAFT-PROPELLER
LX
10. Install crossmember (1).
SPECIFICATIONS – PROPELLER SHAFT
TORQUE SPECIFICATIONS
DESCRIPTION
N·m
Ft. Lbs.
In. Lbs.
BOLT/NUT - SHAFT
COUPLER-TO-
TRANSMISSION
58
43
—
BOLT/NUT - SHAFT
COUPLER-TO-REAR
AXLE ASSEMBLY
58
43
—
BOLT/NUT - COUPLER/
DAMPER-TO-
PROPELLER SHAFT
(REAR)
58
43
—
BOLT - CENTER
BEARING-TO-BODY
(REAR)
27
20
—
BOLT - FRONT
PROPELLER SHAFT TO
AXLE/TRANSFER CASE
FLANGE
61
45
—
LX
SHAFT-PROPELLER
3 - 13
SPECIAL TOOLS – PROPELLER SHAFT
Bearing Splitter, 1130
Installer C-4735-1
3 - 14
SHAFT-PROPELLER
LX
BEARING-CENTER
REMOVAL
1. Remove propeller shaft from vehicle.
NOTE: To address propeller shaft imbalance con-
cerns, the propeller shaft spline interface has a
“skip-tooth” design allowing only one possible
assembly orientation. Install reference marks only
to aid in assembly.
2. Mark front and rear shaft segments (2,3) with
installation reference marks (1).
3. Separate propeller shaft front and rear segments at
bearing and remove boot (1)
LX
SHAFT-PROPELLER
3 - 15
