Chrysler 300/300 Touring/300C, Dodge Magnum. Instruction - page 2
6
INTRODUCTION
LX
FASTENER USAGE
DESCRIPTION
DESCRIPTION
WARNING: Use of an incorrect fastener may result in component damage or personal injury.
Fasteners and torque specifications references in this Service Manual are identified in metric and SAE format.
During any maintenance or repair procedures, it is important to salvage all fasteners (nuts, bolts, etc.) for reassem-
bly. If the fastener is not salvageable, a fastener of equivalent specification must be used.
DESCRIPTION
Most stripped threaded holes can be repaired using a Helicoil
T
. Follow the vehicle or Helicoil
T
recommendations for
application and repair procedures.
LX
INTRODUCTION
7
INTERNATIONAL SYMBOLS
DESCRIPTION
The graphic symbols illustrated in the following International Control and Display Symbols Chart are used to identify
various instrument controls. The symbols correspond to the controls and displays that are located on the instrument
panel.
8
INTRODUCTION
LX
MANUFACTURE PLATE
DESCRIPTION
The Manufacturer Plate is located in the engine com-
partment on the passenger side rear corner of the
hood. The plate contains five lines of information:
1. Vehicle Identification Number (VIN)
2. Gross Vehicle Mass (GVM)
3. Gross Train Mass (GTM)
4. Gross Front Axle Rating (GFAR)
5. Gross Rear Axle Rating (GRAR)
LX
INTRODUCTION
9
