Chery A series. Instruction - page 98
SIZE ADJUSTMENT FOR MOVABLE PARTS
To facilitate test and re-installation of the body moveable parts, the correct clearances of
these parts after adjustment are listed below.
TEST DATA
A=4±0.5 B=6.5±1 C=4±0.5 D=6.5±1 E=4±0.5 F=7.5±1 G=4±0.5
S-43
OPENING SIZE OF ENGINE
COMPARTMENT AND WINDSCREEN
Size Code STD Value Part Measured
A1090 ±2mm Front Mount
Installation Center
B1550 ±2mm Diagonal Line
between Fixing
Bolts of Fenders
C628 ±2mm Space between
Mount Installation
Center and Fender
D997 ±2mm Space between
Center of Fire Wall
and Fixing Bolts of
Fender
E731 ±2mm Opening of
Windscreen
Inspect length of diagonal lines of engine
compartment and diagonal lines of the outer
frame of windscreen.
The values of a group of diagonal lines should
be equal:
A1=A2; B1=B2
S-44
Size Code STD Value Part Measured
A 1235±2mm Opening of Boot
B 1142±2mm Y-Directional
Distance of Boot
Inspect the length of diagonal lines in the outer
frame of luggage boot.
Values of a pair of diagonal lines should be
equal:
A1=A2;
INSPECT THE SPACE BETWEEN
COLUMN B & COLUMN C
Size Code STD Value Part Measured
A 1484±2mm Y-Directional Space of
Installation
Positions for Locking
Column of Column B
B 1365±2mm Y-Directional Space of
Fixing Seats for Safety
Belts with Front Seats
C 1098±2mm Y-Directional Space of
Rear Mount
Installation Center
Positions
D 1459±2mm Y-Directional Space of
Installation Positions
for Locking Columns
of Real Fender
S-45
INSPECT THE SPACE BETWEEN
HINGES OF COLUMN A
Size Code STD Value Part Measured
A 360±0.5mm Z-Directional Distance
of Hinges with
Column A
S-46