Chery A11. Instruction - page 76
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
Vehicle speed sensor
isassembly procedure:
Remove the battery’s negative
ed
the
and remove
Remove the O-ring on the vehicle
speed sensor.
D
1.
terminal;
2. Lift the vehicle;
3. Remove the vehicle spe
sensor’s terminal;
4. Remove the dowel pin on
vehicle speed sensor
the vehicle speed sensor.
5.
51
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
Assembly procedure:
Install O-ring on the vehicle
speed sensor;
Install the vehicle speed sensor
and fix it with the dowel pin.
Install the terminal on the vehicle
y’s negative
1.
1.
2.
speed sensor;
3. 4.Lower the vehicle
5.Connect the batter
terminal.
52
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
53
Oil pan and gasket
isassembly procedure:
Lift the vehicle
Drain off the hydraulic fluid
inside the transmission.
ote:
Do not damage the contact
the
removing the oil
n. Otherwise, it will cause oil
aking.
Loosen the oil pan’s
connecting bolt;
Take off the oil pan and
gasket.
Check whether there is me
particles, and foreign matters in en
make necessary repair.
ssembly procedure:
Install a new gasket;
Install the oil pan and fix it
ty of
e
Check the fluid level.
D
1.
2.
N
surface between the oil pan and
case when
pa
le
4.
5.
Check:
tal powder, cermet powder from the clutch’s surface, rubble
gine coolant on the oil filter screen and oil pan. If yes, find
out the reason and
A
1.
2.
with the connecting bolt;
Tightening torque: 10Nm
3. Lower the vehicle;
4. Fill in a suitable quanti
into th
hydraulic fluid
transmission;
5.
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
54
Side cover and gasket
isassembly procedure:
Lift the vehicle;
. Remove the left front
whe
the
ssembly procedure:
Install a new gasket;
Install the side cover and
fix it with the connecting
bolts;
Tightening torque: 10Nm
Fill hydraulic fluid into the
transmission;
Lower the vehicle.
dometer drive gear case
isassembly procedure:
Take off the vehicle speed
sensor’s terminal;
Loosen the connecting bolt on
the odometer drive gear case
and take off the case.
D
1.
2
el and its drum;
3. Drain off the fluid in
transmission;
4. Loosen the side cover’s
connecting bolts;
5. Take off the side cover
and gasket.
A
1.
2.
3.
4.
O
D
1. Remove the battery’s negative
terminal;
2.
3.