Chery A11. Instruction - page 53
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Loosen mounting bolts and remove the mounting
carrier.
Take out two dowel pins on throttle cam, throttle
cam, and return spring.
Loosen two mounting bolts and remove pawl
spring.
Tool: 27#
socket spanner
Remove one small mounting bolt from the case.
-59-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
Removing parking plunger, brake plate,
spring, and lock cam.
Take out the brake rotor dowel pin.
With appropriate drift, remove elastic pin and
then remove shift shaft.
-60-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Remove shift cam and adjusting gasket.
Remove dowel pin using appropriate drift.
Take out pawl and retracting spring.
Removing bolts and sealing ring.
Remove bearing outer race with special tool
Puller 21/7 和 Puller 22/2.
Locking tool: 45# socket spanner
-61-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
Remove driven shaft bearing and outer race with
same method.
Remove differential and shift shaft sealing ring.
Loosen back light switch.
Tool: 27# socket
-62-