Chery A11. Instruction - page 49
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
2.2、Removing brake C.
Install an installer 5 x 46 000 295 with screw
mechanism, push brake band hydraulic
cylinder head inwards. Remove snap ring
with 2 screwdrivers.
Take off brake band hydraulic cylinder cap
and brake band piston C’.
As shown on figure, remove snap ring, piston
and 2 U steel sheet spring with screwdriver.
-43-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
Screw adjuster bolt out after loosening locking nut.
Pull out brake band locator rod.
2.3、Removing brake band D
Turn over transmission by 90
o
.
As shown on figure, remover cotter snap ring with 2
screwdrivers.
-44-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Remove complete brake D assembly and
diaphragm spring.
Insert air gun into oil inlet and remove
piston D using HP gas.
2.4 、 Removing central seat, brake C
assembly and oil pump
Press down the diaphragm spring of the
brake C with special tool 5 x 46 000 167.
Remove cotter snap ring with screwdriver,
then remove diaphragm spring, pressure
plate and retaining ring etc.
-45-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
Insert air gun into oil inlet hole, removing piston
C using HP gas.
Remove snap ring with screwdriver.
Remove central seat snap ring.
First step: loosen pump body connecting bolts.
-46-