Loader Bobcat 773. Instruction - page 106
PERFORMANCE
Rated Operating Capacity (SAE)
1700 lbs. (770 kg)
. . . . . .
Tipping Load (SAE Rating)
3800 lbs. (1720 kg)
. . . . . . . . . . .
Operating Weight
5476 lbs. (2480 kg)
. . . . . . . . . . . . . . . . . . .
SAE Breakout Force – Lift
3040 lbs. (13522 kg)
. . . . . . . . . . . .
– Tilt
3200 lbs. (14234 kg)
. . . . . . . . . . . . .
Axle Torque
4700 ft.–lbs. (6373 Nm)
. . . . . . . . . . . . . . . . . . . . . . . .
Travel Speed
0–7.0 MPH (11,2 km/hr.)
. . . . . . . . . . . . . . . . . . . . . . .
CONTROLS
Vehicle Steering
Direction and Speed controlled by two hand levers.
. . . . . . . . . . . . . . . . . . . .
Loader Hydraulics
Lift and Tilt
Controlled by separate foot pedals or optional hand controls.
. . . . . . . . . . . . . . . . . . . . . . . .
Front Auxiliary (Optional)
Controlled by electrical switch on RH steering lever.
. . . . . . . . . . . .
Rear Auxiliary (Optional)
Controlled by electrical switch on LH steering lever.
. . . . . . . . . . . .
Engine
Hand lever throttle: Key–Type starter switch and shutdown.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting Aid
Glow Plug– Rocker Switch activated.
. . . . . . . . . . . . . . . . . . . . . . . . .
BOSS activated glow plugs (If so equipped).
Service Brake
Two independent hydrostatic systems controlled by two hand
. . . . . . . . . . . . . . . . . . . . .
operated steering levers.
Secondary Brake
One of the hydrostatic transmissions
. . . . . . . . . . . . . . . . . .
Parking Brake
Mechanical Disc, foot operated pedal.
. . . . . . . . . . . . . . . . . . . . . .
ENGINE
Make/Model
Kubota/V2203EB
. . . . . . . . . . . . . . . . . . . . . . . .
Fuel/Cooling
Diesel/Liquid
. . . . . . . . . . . . . . . . . . . . . . . .
Horsepower (SAE)
Gross: 50 HP (37 kW) Net: 46 HP (34 kW)
. . . . . . . . . . . . . . . . . .
Maximum Governed RPM
2800 RPM
. . . . . . . . . . . .
High Idel RPM
2950–3050 RPM
Low Idle RPM
1125–1175 RPM
Torque @ 1600 RPM (SAE)
Gross: 114 ft.–lbs. (154 Nm) Net: 102.5 ft.–lbs. (138 Nm)
. . . . . . . . . .
Number of Cylinders
Four
. . . . . . . . . . . . . . . . .
Displacement
134.0 cu. in. (2195 cm
3
)
. . . . . . . . . . . . . . . . . . . . . . .
Bore/Stroke
3.43/3.64 (87.0/92.4)
. . . . . . . . . . . . . . . . . . . . . . . .
Lubrication
Pressure System W/Filter
. . . . . . . . . . . . . . . . . . . . . . . . .
Crankcase Ventilation
External
. . . . . . . . . . . . . . . .
Air Cleaner
Dry replaceable cartridge w/safety element
. . . . . . . . . . . . . . . . . . . . . . . . .
Ignition
Diesel–Compression
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
MC–1525
SKID STEER LOADER
SPECIFICATIONS
•
Dimensions are given for loader equipped with standard tires and dirt bucket and
may vary with other bucket types. All dimensions are shown in inches. Respective
metric dimensions are given in millimeters enclosed by parentheses.
•
Where applicable, specification conform to SAE or ISO standards and are subject
to change without notice.
‘‘A”
10 – 16.5 TIRES – 66.0 in. (1676 mm) or 60.0 in. (1524 mm)
31 – 15.5 x 15 TIRES – 66.0 in. (1676 mm)
‘‘B”
10 – 16.5 TIRES – 54.5 in. (1383 mm) or 48.5 in. (1231 mm)
31 – 15.5 x 15 TIRES – 50.0 in. (1270 mm)
‘‘C”
60 in. BUCKET WIDTH – 61.0 in. (1549 mm)
66 in. BUCKET WIDTH – 68.1 in. (1731 mm)
Changes of structure or weight distribution of the loader can cause changes in control and steering response and can cause failure of the
loader parts.
SPECIFICATIONS
‘‘B”
‘‘A”
‘‘C”
78.3
(1989)
46.8
(1189)
62.1
(1577)
7.5
(191)
76.3
(1938)
40.6
(1030)
101.7
(2583)
130.1
(3305)
28.9
(734)
87.5
(2223)
115.0
(2921)
148.7
(3777)
8.6
(218)
93
°
43
°
25
°
26
°
773 BICS Loader
–9–3–
Service Manual
Revised June 01
HYDRAULIC SYSTEM
Pump
Engine Driven, Gear Type
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pump Capacity
15.0 GPM (56 L/min.) @ 2850 RPM
. . . . . . . . . . . . . . . . . . . . .
System Relief at Quick Couplers
3000 to 3050 PSI (20600 to 21029,7 kPa)
. . . . . .
Filter
Full flow replaceable, 3 micron synthetic media element
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Cylinders
Doubleacting;
. . . . . . . . . . . . . . . . . .
Tilt cylinder has cushioning feature on dump & rollback
Bore Diameter:
Lift Cylinder (2)
2.25 (57,2)
. . . . . . . . . . . . . . . . . . . .
Tilt Cylinder (1)
3.50 (88,9)
. . . . . . . . . . . . . . . . . . . .
Rod Diameter:
Lift Cylinder (2)
1.50 (38,1)
. . . . . . . . . . . . . . . . . . . .
Tilt Cylinder (1)
1.50 (38,1)
. . . . . . . . . . . . . . . . . . . .
Stroke:
Lift Cylinder (2)
26.00 (660,4)
. . . . . . . . . . . . . . . . . . . .
Tilt Cylinder (1)
14.50 (368,3)
. . . . . . . . . . . . . . . . . . . .
Control Valve
3–spool, open center type w/float detent on lift
. . . . . . . . . . . . . . . . . . . . . . .
and electrically controlled auxiliary spool.
Fluid Lines
SAE standard tubes, hoses & fittings
. . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Type
Bobcat Fluid (P/N 6563328); If fluid is not available, use
. . . . . . . . . . . . . . . . . . . . . . . . . .
10W–30/10W–40 Class SE motor oil for temperature above 0
°
F (–18
°
C)
5W–30 Motor Oil for temperatures below 0
°
F (–18
°
C).
Hydraulic Function Time
Raise Lift Arms
3.49 Seconds
. . . . . . . . . . . . . . . . . . . .
Lower Lift Arms
2.84 Seconds
. . . . . . . . . . . . . . . . . . . .
Bucket Dump
1.93 Seconds
. . . . . . . . . . . . . . . . . . . . . .
Bucket Rollback
1.64 Seconds
. . . . . . . . . . . . . . . . . . .
ELECTRICAL
Alternator
Belt driven, 55 amp, open
. . . . . . . . . . . . . . . . . . . . . . . . . .
Battery
12 volt, 625 cold cranking amps. @ 0
°
F. (–18
°
C);
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
160 minute reserve capacity at 25 amps.
Starter
12 volt, Gear Reduction Type; 3.62 HP (2,7 kW)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instrumentation
Gauges:Hourmeter, Fuel, Voltmeter, Engine Temperature.
. . . . . . . . . . . . . . . . . . . . .
Warning lights: Engine Temperature, Engine Oil Pressure, Hydraulic Oil
Temperature & Pressure, Hydraulic Filter.
Optional BOSS System Monitors; Engine Coolant Temperature,
Engine Oil Pressure, Engine Coolant Level, Hydraulic System
Temperature & Pressure, Hydraulic & Air Filters, RPM, Battery Condition,
Fuel Level & Machine Hours. Displays visual warnings & sounds
audible alarm. Also controls automatic shutdown function and
has diagnostic capability.
DRIVE SYSTEM
Main Drive
Hydrostatic 4 wheel drive
. . . . . . . . . . . . . . . . . . . . . . . . .
Transmission
Infinitely variable tandem hydrostatic piston pumps, driving 2 fully
. . . . . . . . . . . . . . . . . . . . . . .
reversing hydrostatic motors.
Final Drive
#80 HS endless roller chain & sprockets in sealed chaincase with
. . . . . . . . . . . . . . . . . . . . . . . . .
oil lubrication.
Total Engine to Wheel
Reduction
33:1
. . . . . . . . . . . . . . . . . . . . . . . . .
Axle Size
2.00 (50,8)
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheel Bolts
(8) 9/16”
. . . . . . . . . . . . . . . . . . . . . . . .
CAPACITIES
Cooling System
13 qts. (12,3 L)
. . . . . . . . . . . . . . . . . . . . .
Fuel
14 gals. (53,0 L)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Oil W/Filter
7.5 qts. (7,1 L)
. . . . . . . . . . . . . . . . . .
Hydraulic Reservoir
24.0 qts. (23,0 L)
. . . . . . . . . . . . . . . . . .
Hydraulic/Hydrostatic System
8.5 gals. (32,2 L)
. . . . . . . . .
Chaincase Reservoir
9 gals. (34,1 L)
. . . . . . . . . . . . . . . .
TIRES
Flotation
10–16.5, 8 ply rating
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Terra Grip
31 x 15.5–15, 8 ply rating
. . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Pressure
Inflate tires to MAXIMUM pressure shown on the side wall of
. . . . . . . . . . .
the tire. DO NOT mix brands of tires used on the same loader.
FLOOR PRESSURE
N/A
. . . . . . . . . . . . . . . .
SPECIFICATIONS (Cont’d)
–9–4–
773 BICS Loader
Service Manual
Valves
Valve Seat Width
0.0835 (2,12)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Valve Seat Angle
Intake 30 degrees exhaust 45 degrees
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O.D. of Valve Stems
0.3134–0.3142 (7,96–7,98)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I.D. of Valve Guides
0.3156–0.3161 (8,016–8,03)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clearance Between Valve Stem & Guide
0.0016–0.0026 (0,04–0,07)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allowable Limit
0.0039 (0,1)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Valve Clearance (Cold)
0.007–0.0087 (0,18–0,22)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Valve Recessing (Protrusion)
0.002 (0,05)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Recess)
0.06 (0,15)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Valve Springs
Free Length
1.64–1.66 (41,7–42,2)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allowable Limit
1.62 (41,2)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fitted Length
1.378 (35,0)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compress to Fitted Length
26.4 lbs. (117,6 N)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allowable Limit
22.5 lbs. (100,0 N)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inclination Allowable Limit
0.006 (0,15)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Valve Timing
Intake Valve (Open)
12 degrees B.T.D.C.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Close)
36 degrees A.T.D.C.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exhaust Valve (Open)
60 degrees B.T.D.C.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Close)
12 degrees A.T.D.C.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rocker Arms
O.D. of Rocker Arm Shaft
0.5501–0.5506 (13,97–13,99)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I.D. of Rocker Arm Bushings
0.5513–0.5529 (14,0–14,04)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clearance Between Rocker Arm & Bushing
0.0007–0.0026 (0,02–0,06)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allowable Limit
0.006(0,15)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGINE SPECIFICATIONS
All dimensions are given in inches. Respective metric dimensions are given in millimeters enclosed by parentheses.
Fuel Injection Nozzles
Opening Pressure
1990–2133 PSI (13721–14707 kPa)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Tightness Nozzle Seat
Dry Nozzle at 1849 PSI (12749 kPa)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Injection Pump
Fuel Tightness Plunger
10 sec: initial pressure 2133–1990 PSI (14707–13721 kPa)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limit Permitted
5 seconds
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Injection Timing
17–19 degrees B.T.D.C.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
High Idle
2950–3050 RPM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Low Idle
1125–1175 RPM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cylinder Bore
I.D. of Bore
3.4252–3.4261 (87,0–87,022)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allowable Limit
+0.006 (+0,15)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cylinder Head
Cylinder Head Surface Distortion
0.002 (0,05) Max.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thickness of Gasket (Used)
0.0453–0.0492 (1,15–1,25)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(New)
0.0512–0.0551 (1,3–1,4)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Top Clearance (Piston to Head)
0.0217–0.0276 (0,55–0,70)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compression
412–469 PSI (2840–3234 kPa)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allowable Limit
327 PSI (2255 kPa)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Difference Between Cylinders
10%
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Revised May 98
773 BICS Loader
–9–5–
Service Manual
–9–6–
773 BICS Loader
Service Manual
ENGINE SPECIFICATIONS (Cont’d)
All dimensions are given in inches. Respective metric dimensions are given in millimeters enclosed by parentheses.
Camshaft
Journal O.D.
1.5722–1.5728 (39.934–39,95)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bearing I.D.
1.5748–1.5758 (40,0–40,025)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oil Clearance
0.002–0.0036 (0,05–0,091)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allowable Limit
0.006 (0,15)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alignment Allowable Limit
0.003 (0,08)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cam Lobe Height
1.318 (33,47)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allowable Limit
1.316 (33,42)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
End Clearance
0.0028–0.0087 (0,07–0,22)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allowable Limit
0.012 (0,3)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tappet
Clearance Between Tappet & Guide
0.0008–0.0024 (0,02–0,061)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tappet O.D.
0.9433–0.9441 (23,959–23,98)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tappet Guide I.D.
0.9449–0.9457 (24,0–24,021)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cylinders
Cylinder Bore I.D.
3.425–3.426 (87,00–87,022)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allowable Limit
+0.006 (+0,15)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Piston Rings
Ring Gap (Top & 2nd Ring)
0.012–0.018 (0,3–0,45)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limit Permitted
0.05 (1,25)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ring Gap (Oil Ring)
0.010–0.016 (0,25–0,4)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limit Permitted
0.05 (1,25)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side Clearance of Ring Groove:
Top Ring
Zero Clearance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Second Ring
0.0037–0.0047 (0,094–0,12)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oil RIng
0.0008–0.002 (0,02–0,051)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pistons
Piston Pin Bore
0.9843–0.9848 (25,0–25.014)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limit Permitted
0.9862 (25,05)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting Rod
Piston Pin O.D.
0.9843–0.9847 (25,0–25,011)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Small End Bushing I.D.
0.9852–0.9858 (25,025–25,04)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clearance Between Piston Pin & Small End Bushing
0.0006–0.0015 (0,015–0,038)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service Replacement Part
0.0006–0.003 (0,015–0,07 mm)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting Rod Alignment Limit Permitted
0.002 (0,05)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oil Pump
Oil Pressure Rated RPM
43–64 PSI (294–441 kPa)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limited Permitted
36 PSI (248 kPa)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Idle Speed
14 PSI (98 kPa)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limit Permitted
7 PSI (49 kPa)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clearance Between Inner Rotor & Outer Rotor
0.0039–0.0063 (0,1–0,16)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limit Permitted
0.008 (0,2)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Outer Rotor & Pump Bocy
0.0043–0.0075 (0,11–0,19)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limited Permitted
0.001 (0,25)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
End Clearance Between Inner Rotor & Cover
0.0041–0.0059 (0,103–0,15)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limit Permitted
0.008 (0,2)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .