Loader Bobcat 773. Instruction - page 66

REAR DOOR (Cont’d)

Removal And Installation (One Piece Door)

Remove the light assembly from the door (See Page
5–31.)

Secure the chain hooks (Item 1) [A] to the door as shown.

Connect a chain hoist (Item 2) [A] to the lifting chain.

Disconnect the light harness connector (Item 1) [B] (if so
equipped), from the engine harness.

Remove the top and bottom door hinge mounting bolts
(Item 2) [B] and nuts.

Installation: Tighten the mounting bolts and nuts to
25–28 ft.–lbs. (34–38 Nm) torque.

Lift the door away from the loader frame and put the door
flat on the floor.

Reverse the removal procedure to install the rear door.

NOTE: Install the door stop (Item 3) [B] in the top

hinge as shown.

Revised May 98

B

N–15860

3

2

1

A

N–15410

1

2

–5–28–

773 BICS Loader

Service Manual

REAR DOOR (Cont’d)

Hood Removal And Installation (Two Piece Door)

Remove the rear lights harness from the rear door hood
if so equipped.

Remove the five mounting bolts from the rear door hood
(Item 1) [A].

Installation: Tighten the hood mounting bolts to 25–28
ft.–lbs. (34–38 Nm) torque.

Remove the hood from the rear door.

Bumper Removal And Installation (Two Piece Door)

Remove the three rear bumper mounting bolts (Item 1)
[B] with a 7/32 inch allen wrench.

Installation: Tighten the mounting bolts 180–200 in.–lbs.
(21–23 Nm) torque.

Remove the bumper (Item 2) [B] from the rear door.

Door Latch Removal And Installation

Remove the door latch mounting bolts (Item 1) [C] from
the door latch mechanism.

Installation: Tighten the mounting bolts to 80–90 in.–lbs.
(9–10 Nm) torque.

Remove the latch and handle mechanisms from the rear
door.

Revised May 98

A

P–04143

1

C

P–04278

1

773 BICS Loader

–5–29–

Service Manual

B

P–04281

2

1

REAR DOOR (Cont’d)

Door Latch And Catch Adjustment

The door catch (Item 1) [A] can be adjusted side to side
for alignment with the door latch.

The door latch mechanism (Item 1) [B] can be adjusted
forward or backward for alignment with the door catch.

Never service or adjust the machine when the
engine is running unless instructed to do so
in the manual.

AVOID INJURY OR DEATH

W–2012–0497

Revised June 01

A

P–01598

1

B

P–04278

1

–5–30–

773 BICS Loader

Service Manual

REAR LIGHTS

Rear Lights Removal and Installation (One Piece
Door)

Remove the bulb assembly (Items 1 & 2) [A] from the light
housing (Item 3) [A] by turning bulb assembly a 1/4 turn.

Using care press the rear light and housing from the door
[B].

Reverse this procedure for installation.

Revised June 01

A

N–15861

1

2

773 BICS Loader

–5–31–

Service Manual

B

N–15862

Рассказать друзьям